MIL-STD-461 RF Shielded Chamber for Emissions & Susceptibility Testing

This EMC MIL-STD-461 chamber is designed for testing in accordance with Mil-Std 461E, Mil-Std 461F and Mil-Std-461G. The chamber’s shell is constructed with modular cell-type shielding panels. Interior end walls, portions of the sidewalls and ceiling are lined in the manner required by MIL-STD-461.

Specifications:

• One Threaded Brass Ground Stud
• One Test Bench with Grounding Attachments to Chamber End Wall per MIL-STD-461E/F/G
• Two UL-listed 2 x 30 Amp, 60 Hz power-line filters; One for Lights, One for Power to EUT
• One Door Maintenance Kit
• Two (2) Waveguide Vents
• .15 mm (6 mil) Polyethylene Vapor Barrier
• 3.0 mm (.125 in) Thick Dielectric Floor Underlay with 3.0 mm (.125 in) Vinyl Floor Tile
• One (1) Threaded Brass Ground Stud
• Four (4) Incandescent Corner-mounted Light Fixtures with Incandescent Floodlights
• Two (2) Connector Panels
• Shield Test per MIL-STD-285
• One Frequency Test at 1 GHz

Dimentions:

Internal Working Area Length: 4.267 m (14.00 ft)
Internal Working Area Width: 4.267 m (14.00 ft)
Internal Working Area Height: 2.438 m (8.00 ft)
Shield Room Inner Length: 5.486 m (18.00 ft)
Shield Room Inner Width: 5.486 m (18.00 ft)
Shield Room Inner Height: 3.048 m (10.00 ft)
Overall Structure Length: 5.791 m (19.00 ft)
Overall Structure Width: 5.791 m (19.00 ft)
Overall Structure Height: 3.352 m (11.00 ft)