Send Enquiry For ALA-CISPR16 Active Loop Antenna for CISPR 16
ALA-CISPR16 Active Loop Antenna for CISPR 16
- Active Shielded Loop Antenna
- Wide Frequency Range
- Rugged Construction
- Compliant with CISPR 16
Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
Loop Antennas
Loop Antennas
Low frequency loop antennas for EMC testing (1 kHz to 30 MHz typically) come in conbinations of active, passive and shielded models with and without built-in preamplifiers. Conduct emissions and immunity testing typical for military standards and more.
Loop Antennas There are 39 products.
ALA-CISPR16 Active Loop Antenna for CISPR 16
In Stock- Active Shielded Loop Antenna
- Wide Frequency Range
- Rugged Construction
- Compliant with CISPR 16
ETS Lindgren 7604 Magnetic Field Pickup Coil
Call for Availability- 20 Hz Frequency Minimum
- 500 kHz Frequency Maximum
- Type BNC Connectors
- 50 Ω Impedance (Nominal)
- Omnidirectional Pattern Type
- Linear Polarization
ALA30M Active Loop Antenna for Magnetic Field Testing
- 1 kHz - 30 MHz
- Loop Diameter: 12 inches
- 50 Ohm Impedance
- BNC Connector
- 2.5 LBs
$3,079.00Typically In StockPLA30M Passive Loop Antenna for IEEE 299, MIL-STD, NSA 65-6, ANSI C63.5 Compliance Testing
Typically In Stock- 1 KHz - 30 MHz
- Built for MIL-STD & CISPR 16-1-4 antenna requirements
- Loop Diameter: 12 Inches (30cm)
- 50 Ohms of DC Resistance
- BNC Connector
- Mounting Base:1/4 X 20 Thread, Female
LSA-5M Loop Sensor for RE01 and RE101 Magnetic Emission Tests
In Stock- For Test Methods RE101 of MIL-STD-461F
- RE101 of MIL-STD-461D/E/F
- Dimensions: 5.24" diameter (13.3 cm)
- Connector: BNC
- Number of turns: 36
- Wire: DC resistance between 5 and 10 Ω
- Shielding: Electrostatic
- Weight: 2 pounds (0.9 kg)
- Shipping weight: 3 pounds (1.36 kg)
Solar Type 9230-1 Radiating Loop and Type 9229-1 Loop Sensor for MIL-STD-461D/RS101
- 30 Hz to 100 kHz frequency range
- Radiating Loop and Loop Sensor
- MIL-STD-461D/RS101 magnetic field tests
RL200K Radiating Loop Sensor for MIL-STD-461D/RS101
- 30 Hz to 100 kHz frequency range
- Connector Type: BNC
- Radiating Loop and Loop Sensor
- MIL-STD-461D/RS101 magnetic field tests
PLA30M-9K Passive Loop Antenna for CISPR, MIL-STD, ANSI C63.5 Compliance Testing
Typically In Stock- 9 KHz - 30 MHz
- Built for MIL-STD & CISPR 16-1-4 antenna requirements
- Loop Diameter: 22 3/8 in. (56.8 cm)
- 50 Ohms of DC Resistance
- BNC Connector
- Mounting Base:1/4 X 20 Thread, Female
PLA1M 20 Hz- 1MHz Passive Loop Antenna CISPR, MIL-STD, ANSI C63.5 Compliant for Electrostatic Shielding Effectiveness Testing
Typically In Stock- 20 Hz - 1 MHz
- Loop Diameter: 22 3/8 inches
- 50 Ohm Impedance
- BNC-Type Connector
- 2.5 LBs (1.13 kg)
AH Systems SAS-560 Passive Loop Antenna for MIL-STD-461 RE 101
Typically In Stock- 20 Hz - 2 MHz
- Built for MIL-STD-461 RE 101 Testing
- Loop Diameter: 5¼ in. (13.3 cm)
- 10 Ohms of DC Resistance
- Turns: 36 (7-41 Litz)
- BNC Connector
EMCO 6511 Shielded Loop Antenna
In Stock- 20 Hz to 5 MHz Frequency Range
- Individually calibrated
- Designed for both emissions and immunity tests.
- Standard Configuration
- Antenna/coil assembly
- Individually calibrated per IEEE STD 291
- Two year warranty
Com-Power AL-RE101 30Hz to 100kHz Passive Loop Antenna
1 Unit- Receiving Loop Antenna Designed Specifically for MIL-STD-461, RE101 Testing
- 30 Hz to 100 kHz Frequency Range
- Antenna Base Plate Ensures Required 7 cm Separation Between Antenna and EUT
- Individual Calibration per SAE ARP958 Included
- Three-year Standard Warranty
- Connectors: BNC (female)
