> Compliance Standards>FCC Part 15>FCC Line-impedance Stabilization Network (LISN)
FCC Line-impedance Stabilization Network (LISN)

Measurements of radio frequency emissions conducted to the public utility power lines shall be performed using a 50 ohm/50 uH line-impedance stabilization network (LISN). NOTE: Receivers tested under the transition provisions contained in §15.37 may be tested with a 50 ohm/5 μH LISN.

Rent, buy or lease FCC Line-impedance Stabilization Networks (LISN). The EMC Shop specializes in measurements of radio frequency emissions.

FCC Line-impedance Stabilization Network (LISN) There are 13 products.

per page
Showing 1 - 12 of 13 items
  • Quick view
    • 150 kHz to 30 MHz Frequency Range
    • 32 Amps Current Rating
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • Remote Switching of Line Under Test
    • Four-conductor Network appropriate for both 3Ø Delta and Wye Power Configurations
    • Three-Year Warranty

    To Rent Com-Power LI-3P-132

    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 150 kHz to 30 MHz Frequency Range
    • 16 Amps Current Rating
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • Remote Switching of Line Under Test
    • Four-conductor Network appropriate for both 3Ø Delta and Wye Power Configurations
    • Three-Year Warranty
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Line Impedance Stabilization Network ( LISN )
    • Network Iductance Impedance: 50/250 µH, 50 ohms
    • Frequency Range: 9 kHz to 100 MHz
    • Maximum Current: 25 A
    • Maximum Vultage: 400 VAC Line - Line; 220 VAC Line to Ground
    • Lines Plus Ground: 2
    • Power Source Frequency: DC - 60 Hz
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $7,600.00 New
    • 9 kHz a 30 MHz Frequency Range
    • 50μH/250μH Inductance
    • 100 Amps Current Handling
    • DC – 400V, 60Hz – 270VAC, 400Hz – 130VAC Voltage Handling
    • 4-Year Warranty
    • Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
    $7,600.00
    Add to cart
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Dual-line-V-LISN
    • Compliant to CISPR 16-1-2, MIL-STD-461, FCC Part 15, ANSI C63.4
    • Current up to 16 Amps
    • Frequency range 9 kHz to 30 MHz
    • Hand and remote operated
    • Massive grounding bars
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range: 9 kHz to 30 MHz
    • Current Rating: 16 Amps
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • Remote Switching of Line Under Test
    • Four-conductor Network appropriate for both 3Ø Delta and Wye Power Configurations
    • Three-Year Warranty
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rentals Ship Same Day
    • Typ. configured w/ NEMA
    • Suitable for making FCC 15, VDE 0871, VDE 0875 and EN 55022 conformance measurements
    • Insulated Plug for Safer Power Connections
    • Earth Line Choke isolates EUT from RF ground while maintaining a safety ground
    • Calibrated to ANSI C63.4
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $1,995.00 New
    • 9kHz-30MHz 
    • V LISN
    • CISPR 16-1-2 ANSI C63.4 FCC, ETS, VCCI and VDE, MIL461E/F
    • N type /BNC Connector option
    $1,995.00
    Add to cart
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range: 9 kHz - 30 MHz
    • Current Rating: 4 x 50 (100) Amps
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • Connections: 4 Wing Terminals
    • Impedance Simulation: 50 µH+5 Ω || 50 Ω
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 9 kHz a 30 MHz frequency range
    • 100 A max output current
    • Large baseplate for optimal grounding
    • Local and remote control for PMM EMI receivers
    • Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Price is for a pair of LI-125A line impedance stabilization networks
    • Frequency Range: 150 kHz to 30 MHz
    • Integral Transient Limiter/10 dB Attenuator with
    • ON/OFF (bypass) Switch
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • Dual-Conductor Network with Universal Power
    • Receptacle to accept any EUT Plug
    • 20 Amps Current Handling Capability
    • Three-Year Warranty
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 9 kHz a 30 MHz frequency range
    • 63 A max output current
    • Large baseplate for optimal grounding
    • Local and remote control for PMM EMI receivers
    • Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
    Request Quote
    Typically Stocked
    Request Quote/More Info
    Add to Compare
Showing 1 - 12 of 13 items