> Compliance Standards>CISPR Standards>CISPR 25>Artificial Mains Networks (AMN's)
Artificial Mains Networks (AMN's)

Rent or Buy Artificial Mains Networks per CISPR 25.

The AN shall have a nominal 5 mH inductance and shall meet the impedance characteristics shown in figure 3 with a tolerance of ±10 %. A suggested schematic is shown in annex F. The measuring port of all ANs shall be terminated with a 50 W load (either a measuring instrument or a resistor). For the purpose of this standard, the AN may be used from 0.1 to 108 MHz.

Artificial Mains Networks (AMN's) There are 14 products.

per page
Showing 1 - 12 of 14 items
  • Quick view
    $2,399.00 NIST Traceable

    CISPR 25 LISN's Ship Today

    • Current Handling: 200 Amps (Custom Models Available up to 1,000 Amps)
    • Inductance: 5 μH
    • Frequency Range: 100 kHz - 108 MHz
    • Termination: Threaded Stud (TS)
    • RF Connector: N-Type
    • Typical Configuration in Stock: LISN-CISPR25-200A-TS-N
    • 4 Year Warranty
    $2,399.00
    Add to cart
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1
    • To measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV),
    • Can be used for BCI with an external dummy load.
    • Impedance (5µH) || 50 Ohm
    • 800 A
    • 1000 V (DC)
    • Backside with built in 0.1 microfarad capacitor to ground
    • N-jack
    • Normally used in pairs inside the enclosure HVSE 8601!
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 10 kHz to 400 MHz Frequency Range
    • Price is for a pair of LI-3100 line impedance stabilization networks
    • Frequency range of 10 kHz to 400 MHz
    • Fully compliant with DO-160/ MIL-STD 461F/CISPR 25/ CISPR 16-1-2
    • 100 Amp AC (forced air cooling)
    • “Air-core” inductors to prevent saturation
    • Individual Calibration Included
    • Three-Year Warranty
    Request Quote
    Typically in Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 100 kHz to 108 MHz Frequency Range
    • Fully compliant with CISPR 25 / CISPR 16-1-2
    • "Air-core" inductors to prevent saturation
    • Individual Calibration Included
    • Three-Year Warranty
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • High Voltage LISN according to to CISPR 25 Ed. 4 or BMW GS 95025-1
    • To measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV),
    • Can be used for BCI with an external dummy load
    • Impedance (5µH) || 50 Ohm
    • 70 (100) A
    • 1000 V (DC)
    • Backside with built in 0.1 microfarad capacitor to ground
    • N-jack
    • Normally used in pairs inside the enclosure HVSE 8600!
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1
    • To measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV),
    • Can be used for BCI with an external dummy load.
    • Impedance (5µH) || 50 Ohm
    • 200 A
    • 1000 V DC
    • Backside with built in 0.1 microfarad capacitor to ground
    • N-jack
    • Normally used in pairs inside the enclosure HVSE 8600!
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Artificial Network as per ISO 7637 or CISPR 25/ ISO 11452-4
    • Frequency range: 100kHz - 108MHz
    • DC voltage max. 400V
    • AC voltage max. 250V (up to 1kHz)
    • Current max. 50A AC/DC cont.
    • Insertion loss < 3dB
    • Compact design
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • High Voltage LISN according to to CISPR 25 Ed. 4 or BMW GS 95025-1
    • To measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV), can be used for BCI with an external dummy load.
    • Impedance (5µH) || 50 Ohm
    • 400 A
    • 1000 V (DC)
    • Backside with built in 0.1 microfarad capacitor to ground
    • N-jack
    • Normally used in pairs inside the enclosure HVSE 8600!
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • LISN 5 µH || 50 Ohm
    • 70 (100) single path
    • Suitable for 600V DC and 270 V AC 890 Hz
    • Calibrated up to 400 MHz according to DO-160
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing
    • Impedance (5µH + 1 Ohm) || 50 Ohm
    • Max. 400 A. With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side, single path
    • BNC female connector

    Option N connector:

    • N-female connector instead of BNC
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing
    • Impedance (5µH + 1 Ohm) || 50 Ohm
    • Max.200 A
    • With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side, single path
    • BNC female connector

    Option N connector:

    • N-female connector instead of BNC
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing
    • Impedance (5µH + 1 Ohm) || 50 Ohm
    • Max. 70 (100) A
    • With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side single path
    • BNC female connector

    Option N connector:

    • N-female connector instead of BNC
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
Showing 1 - 12 of 14 items