Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
IEC 61000-4-4 Burst Generators
IEC 61000-4-4 Burst Generators
The EMC Shop focuses on self certification to CE Marking and precompliance immunity test and debugging. Rent, buy or lease IEC 61000-4-4 Burst Generators, Fast Transient Simulators.
IEC 61000-4-4 Burst Generators There are 11 products.
Showing 1 - 11 of 11 items
CE Mark Product Package for IEC/EN 61000-4 Series Compliance
Typical Lead Time 6 - 8 Weeks- Package Includes:
- ESD Compliance per IEC 61000-4-2
- Radiated RF Immunity per IEC 61000-4-3
- EFT/Burst Immunity per IEC 61000-4-4
- Surge Immunity per IEC 61000-4-5
- Conducted RF Immunity per IEC 61000-4-6
- Powerfail Immunity per IEC 61000-4-11
Haefely AXOS 5 Surge/EFT/Burst Impulse Generator up to 5 kV for IEC/EN 61000-4-4
Typically In Stock- Haefely AXOS5 Rentals
- Output Voltage: 0.2 – 5.0 kV
- Automated test modes, software assisted test preparation, predefined test routines and visual aided test setups
- Automatic generation of test report, including test parameters, test setup and test result
- IEC/EN 61000-4-4
- IEEE/ANSI C62.41
- IEC/EN 61850-3
- Easily expanadable to add Surge (IEC 61000-4-5) and/or PQT (IEC 61000-4-11 & IEC 61000-4-29)
Schloder SFT 2400 125 kHz EFT/ Burst Generator IEC 61000-4-4 Ed. 3
Typically In Stock- Operation via capacitive color touch display
- Burst - frequency up to 125 kHz, pulse amplitude up to 5.0 kV
- Modification of all parameters during the test possible
- Single impulse to permanent burst, various special functions
- Max. 5000 pulses / sec. and 500 pulses / packet
- Time accurate triggering
Schloder SFT 1420 2 MHz Burst Generator
Typically In Stock- Frequency up to 2000 kHz
- Max. 2000 Pulses Per Packet
- RS 232 Interface
- Various Special Function
- IEC 61000-4-4 up to 4.8 kV
- Single spike to Continuous Burst
- 5000 Pulses/Sec – 500/Package
- Changing of all Parameters during a Burst Test
- Special Function "Real-Burst" and other
3ctest EFT 500S Burst/EFT Simulator up to 4.8 kV w/ Single Phase CDN
Typical Lead Time 2 - 4 Weeks- Internal automatic single phase CDN
- 5.7 inch color touch screen front panel operation
- programmable setup of test parameters
- EFT 500S(single phase network) EFT 500T(three-phase network)
- Ethernet,RJ45 port for PC remote control, print and documentation
- 0.25kV-4.8kV±10%
- additional hardware/software
EM Test EFT 500N5.8 Burst Generator up to 4.8kV, w/ Built in 3-Phase Coupler, IEC 61000-4-4
In Stock- 3 Phase Coupler suitable for DUT up to:
- 32 Amps, 3x 690 Volts AC
- 32 Amps, 270 Volts DC
- Voltage up to 4.8 kV
- Meets Conducted Immunity Standards:
- ANSI/IEEE C62.41
- IEC/EN 61000-4-4
- IEC 60601-1-2
- IEC 61326
- IEC 61850-3
- Pulse verification acc. to Edition 3 on each coupling path
- 3 Phase Coupler suitable for DUT up to:
Turn-Key Solution for EFT/Burst, Surge Combination Wave with 3-Phase CDN and EFT Clamp up to 5 kV
Typically In Stock- Package Includes:
- EFT/Burst Immunity per IEC 61000-4-4
- Surge Immunity per IEC 61000-4-5
- Compliance & pre-compliance testing of electrical products
EM Test Compact NX5 B-1-300-16 5.5kV EFT/Burst Generator
In Stock- New units Ship Immediately
- Rent the Compact NX5 B-1-300-16 for $975/month
- Compact NX5 B-1-300-16 Configuration Includes:
- 5.5 kV EFT/Burst Immunity Capability per IEC 61000-4-4 edition 3
- Monitoring Outputs (BNC)
- Pre-programmed test routines
- Built in Single Phase Coupler 300 Volts 16 Amps
- AC Adapter for EUT Inputer (Standard 3 Prong)
- Banana Plugs for CDN Input
- Calibration Certificate
- Manual
Thermo Fisher Keytek ECAT High Voltage Burst/EFT Generator up to 8 kV
In Stock- Industry Best Warranty on Used Test Equipment
- Try before you bur or rent this Keytek 8kV EFT System
- System Configuration:
- E103 Controller (fiber-interface for remote control)
- E421 EFT/Noise Burst Simulator to 8 kV (IEC 61000-4-4)
- E4554 Burst Coupling up to 8 kV
- Input voltage: 100V to 240VAC
- Input Current: 3.5A at 100 V; 1.5A at 240 V
- User Manual
- Fresh Calibration Certificate
- 10% off Calibration Service for Life
3ctest EFT 700 Burst/EFT Simulator up to 7 kV with Single or Three Phase CDN
Typical Lead Time 4 - 6 Weeks- 5.7 inch colorful touch screen for front panel operation
- Max. Pulse output voltage 7.0kV
- Built-in fully automatic single-phase or three-phase coupling/decoupling network, coupling methods can be in any combination, test parameters can be set by scheduling.
- Available for controlling external three-phase large current coupling/decoupling network
Showing 1 - 11 of 11 items