> Compliance Standards>Military & Aerospace Standards>MIL-STD-461>Radiated Emissions
Radiated Emissions

The EMC Shop stocks and delivers a wide array MIL-STD-461 Radiated Emissions equipment. Applications include: Magnetic Field, Electric Field,Antenna Spurious and Harmonic Outputs.

Radiated Emissions There are 25 products.

Subcategories

  • MIL-STD-461 RE101

    RE101 Purpose

    Radiated Emissions, magnetic field

    This requirement is applicable from 30 Hz to 100 kHz for radiated emissions from equipment and subsystem enclosures, including electrical cable interfaces. The requirement does not apply to radiation from antennas.

    This test procedure is used to verify that the magnetic field emissions from the EUT and its associated electrical interfaces do not exceed specified requirements.

    Test Equipment

    The test equipment shall be as follows:

    a. Measurement receivers

    b. Data recording device

    c. Loop sensor having the following specifications:

    (1) Diameter: 13.3 cm

    (2) Number of turns: 36

    (3) Wire: DC resistance between 5 and 10 ohms

    (4) Shielding: Electrostatic

    (5) Correction factor: See manufacturer’s data for factors to convert measurement receiver readings to decibels above one picotesla (dBpT).

    d. LISNs e. Ohmmeter

    f. Signal generator

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • MIL-STD-461 RE102

    Test Equipment

    EMI Measurement Receiver

    LISNs

    Preamplifier

    Antenna 10 kHz to 30 MHz

    Antenna 30 MHz to 200 MHz, Biconical

    Antenna 200 MHz to 1 GHz, Double ridge horn

    Antenna 1 GHz to 18 GHz, Double ridge horn

    Signal generators

    Stub radiator

    Capacitor, 10 pF

    Data recording device

    MIL-461 RE102Overiview

    Radiated emissions, electric field.

    This requirement is applicable for radiated emissions from equipment and subsystem enclosures, and all interconnecting cables. For equipment with permanently mounted antennas this requirement does not apply at the transmitter fundamental frequencies and the necessary occupied bandwidth of the signal.

     

    This test procedure is used to verify that electric field emissions from the EUT and its associated cabling do not exceed specified requirements.

per page
Showing 1 - 12 of 25 items
  • Quick view
    • Meets MIL-STD-461 LISN Requirements
    • Single Line
    • 10 kHz - 10 MHz,
    • 50μH
    • Power Handling: 100 Amps 400VDC/270VAC
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $5,400.00 New
    • Meets MIL-STD-461 LISN Requirements
    • Dual Line
    • (2)10 kHz - 50 MHz, 50μH in one box
    • Power Handling: 100 Amps 400VDC/270VAC
    • 4 Year Warranty
    • American Made
    $5,400.00
    Add to cart
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 20 Hz Frequency Minimum
    • 500 kHz Frequency Maximum
    • Type BNC Connectors
    • 50 Ω Impedance (Nominal)
    • Omnidirectional Pattern Type
    • Linear Polarization
    Request Quote
    Call for Availability
    Request Quote/More Info
    Add to Compare
  • Quick view
    • High Gain
    • Full Waveguide Band Coverage
    • Small Design for Space Savings
    • High Output Power
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $3,079.00
    • 1 kHz - 30 MHz
    • Loop Diameter: 12 inches
    • 50 Ohm Impedance
    • BNC Connector
    • 2.5 LBs
    $3,079.00
    Add to cart
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 1 KHz - 30 MHz
    • Built for MIL-STD & CISPR 16-1-4 antenna requirements
    • Loop Diameter: 12 Inches (30cm) 
    • 50 Ohms of DC Resistance
    • BNC Connector
    • Mounting Base:1/4 X 20 Thread, Female
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $2,450.00 New

    Order and ship today

    • Meets MIL-STD-461 LISN Requirements
    • Single Line
    • 10 kHz - 50 MHz, 50μH
    • Power Handling: 100 Amps 400VDC/270VAC
    • 4 Year Warranty
    • American Made
    $2,450.00
    Add to cart
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $7,500.00
    • Standard size: 2.5 by 1 by .9 meters
    • Copper Grounding Straps
    • Ideal for CISPR, MIL, IEC and more
    • 1 mm Copper Top
    • Heavy duty casters
    $7,500.00
    Add to cart
    1-2 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    $7,575.00 New
    • Runs on standard 120VAC (up to 240V for international use)
    • Suitable for millimeter wave emissions and system performance improvement
    • Frequency Range of 18 GHz to 40 GHz
    • Low Noise Figure: 3 dB
    • High Gain: 40 dB typical
    • Output Power: + 10 dBm @ 1 dB compression
    • 2.92 mm (F) Connectors
    $7,575.00
    Add to cart
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Meets MIL-STD-461G Appenix A Specifications LISN & RTCA DO-160 (w/external 10uF capacitor) Requirements
    • Single Line
    • 150kHz – 400 MHz, 5μH
    • Power Handling: 100 Amps
    • 4 Year Warranty
    • American Made
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • For Test Methods RE101 of MIL-STD-461F
    • RE101 of MIL-STD-461D/E/F
    • Dimensions: 5.24" diameter (13.3 cm)
    • Connector: BNC
    • Number of turns: 36
    • Wire: DC resistance between 5 and 10 Ω
    • Shielding: Electrostatic
    • Weight: 2 pounds (0.9 kg)
    • Shipping weight: 3 pounds (1.36 kg)
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 9 KHz - 30 MHz
    • Built for MIL-STD & CISPR 16-1-4 antenna requirements
    • Loop Diameter: 22 3/8 in. (56.8 cm)
    • 50 Ohms of DC Resistance
    • BNC Connector
    • Mounting Base:1/4 X 20 Thread, Female
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
Showing 1 - 12 of 25 items