> Compliance Standards>Military & Aerospace Standards>MIL-STD-461>Radiated Susceptibility>MIL-STD-461 RS103>MIL-STD-461 RS103 Measurement Receivers
MIL-STD-461 RS103 Measurement Receivers

The EMC Shop specializes in military radiated immunity and susceptibility testing. Rent, buy or lease MIL-STD-461 RS103 Measurement Receivers. 

MIL-STD-461 RS103 Measurement Receivers There are 9 products.

Showing 1 - 9 of 9 items
  • Quick view
    • Frequency ranges: 1 Hz to 44 GHz
    • Compliant with CISPR16-1-1, ANSI-C63.2, MIL‑STD‑461 and FCC
    • Highest dynamic range and accuracy for demanding certification measurement
    • FFT-based time domain scan
    • EMI, signal, and spectrum analyzer AIO.
    • One of the Best Rohde & Schwarz ESW EMI Test Receivers on the market
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Extend frequency up to 110 GHz with Keysight smart mixers
    • Capture transient signals with real-time spectrum analysis
    • Perform deeper troubleshooting with the 89600 VSA software
    • Simplify testing of phase noise, noise figure, LTE-Advanced, WLAN
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rentals ship immediately
    • 1 Hz - 26.5 GHz
    • Real-Time Analysis up to 40 MHz
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461G EMI receiver requirements
    • Purchase a Used Keysight N9038A EMI Receiver here.
    Request Quote
    Call for Availability
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rentals ship immediately
    • 85 MHz Bandwidth Analysis Option (Fastest Testing Possible)
    • Real-Time Analysis up to 85 MHz BW
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
    • Purchase a Used Keysight N9038 EMI Analyzer here.
    Request Quote
    Call for Availability
    Request Quote/More Info
    Add to Compare
  • Quick view
    $14,012.50 $14,750.00 -5% Used
    • ISO 17025 Calibration from Keysight
    • 25 MHz Bandwidth
    • -170 dBm DANL at 1 GHz
    • Max Dynamic Range 3rd order @ 1 GHz: 112 dB
    • Standard Attenuator Range; 60 dB (10 dB Steps)
    • Measure the smallest signals in the presence of large ones with best-in-class level accuracy, DANL & TOI
    • Perform power measurements quickly at discrete frequency points with list-sweep mode
    • Simplify testing with X-Series measurement apps: phase noise, noise figure, analog demodulation, wireless communications & more
    $14,012.50 $14,750.00 -5%
    Add to cart
    Reduced price!
    1 Unit
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rent the Keysight (Agilent) N9038A-526-B85-RT1
    • 3 dB resolution bandwidths
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
    • ±0.5 dB absolute amplitude accuracy
    • -166 dBm displayed average noise level (DANL) with preamplifier and noise floor extension
    • EMC measurements offering simultaneous detectors, signal lists, scan tables, limit lines, and correction factors
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency range: 10 Hz – 30 MHz, expandable to 3/6/18 GHz by the external modules 9030, 9060, 9180
    • Very low noise floor:  < -24 dBµV in band A, < -7 dBµV in band B
    • Multi-band preselector
    • All CISPR detectors, simultaneous
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency ranges:
      • 2 Hz to 8 GHz ESW8
      • 2 Hz to 26.5 GHz ESW26
      • 2 Hz to 44 GHz ESW44
    • Compliant with CISPR16-1-1, ANSIC63.2, MIL‑STD‑461 and FCC
    • Highest dynamic range and highest accuracy for demanding certification measurement
    • Ultrafast measurements with FFT-based time domain scan
    • EMI test receiver and signal and spectrum analyzer in a single box
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rentals ship immediately
    • Monthly Rate Price
    • Current ISO 17025 Calibration Provided
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461
    • Frequency Range: 20 Hz - 40 GHz
    • Configuration Includes:
      • B10: External Generator Control via GPIB
      • B18: Removable Hard Disk
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
Showing 1 - 9 of 9 items