> Manufacturers>Teseq (Schaffner)>Teseq RF Test Equipment
Teseq RF Test Equipment

Teseq offers an assortment of unique RF test equipment suitable for radiated susceptbility compliance testing including RF amplifier, GTEM cells, reference sources, RF switches, reverberation chambers and more.

Teseq RF Test Equipment There are 36 products.

per page
Showing 1 - 12 of 36 items
  • Quick view
    • Max EUT Size: (410 x 410 x 310mm) (16.14 x 16.14 x 12.20in.)
    • MAX EUT dimension for uniform-area: (167 x 167 x 167mm) (6.57 x 6.57 x 6.57in.)
    • Emissions and immunity testing in a single, shielded environment
    • Meets basic standard: IEC/EN 61000-4-20
    • Meets standards for emissions testing: CISPR 14-1, IEC 61000-6-3 and IEC 61000-6-4 for EUTs without connected cables
    • Meets standards for immunity testing: EN 60118-13
    • Ideal for design qualification and pre-certification
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency range 9 kHz to 3 GHz
    • Linear measurement range -45 to +20 dBm
    • RMS power using log detector
    • Low voltage detection
    • For direct connection to USB
    • Metal casing, ruggedly designed
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Max (620 x 620 x 490mm) (24.40 x 24.40 x 19.29in.)
    • Max EUT dimension for uniform-area: (250 x 250 x 250mm) (9.84 x 9.84 x 9.84in.)
    • Emissions and immunity testing in a single, shielded environment
    • Meets basic standard: IEC/EN 61000-4-20
    • Meets standards for emissions testing: CISPR 14-1, IEC 61000-6-3 and IEC 61000-6-4 for EUTs without connected cables
    • Meets standards for immunity testing: EN 60118-13
    • Ideal for design qualification and pre-certification
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Max EUT Size: 200 x 200 x 150 mm (7.87 x 7.87 x 5.9)in.
    • Max EUT dimension for uniform-area: (83 x 83 x 83 mm) (3.26 x 3.26 x 3.26in.)
    • Test cell with special opening to test integrated circuits on approx. 45 mm septum height
    • Meets IEC/EN 61000-4-20, SAE J1752/3, IEC 62132-2 and IEC 61967-2
    • For 100 Watts input power
    • Excellent VSWR up to 18 GHz
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • For use with one, two, three, or four unscreened balanced pairs
    • Refers schematic circuit example in CISPR 22/32 Figure D.3/G.3
    • Intended for connection to cable category 3 and 5
    • 1000BaseT and PoE application
    • Changeable pin-arrangements with RJ11 and RJ45
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency range: 1 MHz to 3 GHz (nominal range);200 kHz to 4 GHz (utilizable range)
    • Gain: typ. 12.5 dB
    • Gain flatness: ±0.3 dB (1 MHz to 1 GHz); +0.3 / -2.5 dB (200 kHz to 3 GHz)
    • RF-Input: N - female, 50 Ω
    • RF-Output: N - male, 50 Ω
    • VSWR (input): ≤1.5
    • Noise figure: typ. 4 dB
    • 1 dB-compression (output): >+12.5 dBm (119.5 dBμV)
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency range: 9 kHz to 2 GHz (nominal range); 9 kHz to 4 GHz (utilizable range)
    • Gain: typ. 25 dB
    • Gain flatness: +0.5 / -3 dB
    • RF-Input: N - female, 50 Ω
    • RF-Output: N - male, 50 Ω
    • VSWR (input): typ. 1.5 (above 20 kHz)
    • Noise figure: typ. 4 dB
    • 1 dB-compression (output): >+12.5 dBm (119.5 dBμV)
    • Intercept point IP3 (output): typ. +33 dBm
    • Max. input (linear): -12.5 dBm (94.5 dBμV)
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Suitable for EUT Approx. (200 x 200 x 150mm) (7.87 x 7.87 x 5.90in.)
    • Max EUT dimension for uniform-area: (83 x 83 x 83mm) (3.26 x 3.26 x 3.26in.)
    • Emissions and immunity testing in a single, shielded environment
    • Meets basic standard: IEC/EN 61000-4-20
    • Meets standards for emissions testing: CISPR 14-1, IEC 61000-6-3 and IEC 61000-6-4 for EUTs without connected cables
    • Meets standards for immunity testing: EN 60118-13
    • Ideal for design qualification and pre-certification
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Ultra-broadband immunity antenna
    • For compact chambers
    • Reduced chamber coupling
    • Up to 30% test time saved
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Immunity testing to 300 watts
    • Excellent symmetry ±1 dB (typically better than ±0.5 dB)
    • Improved high frequency gain
    • No rotational offsets
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Broadband immunity and emission antenna
    • Less than 100 W required above 80 MHz
    • Can also be used for emission testing
    • Low chamber coupling
    • Up to 30% saving in test time
    • Excellent symmetry
    Request Quote
    Typical Lead Time 4 - 6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Ideal for compliance emission testing
    • VHF radio approval applications
    • Immunity testing to 300 Watts CW
    • Excellent balance < 1dB
    • No rotational offsets
    • Easily transportable
    Request Quote
    Typical Lead Time 4 - 6 Weeks
    Request Quote/More Info
    Add to Compare
Showing 1 - 12 of 36 items