> Compliance Standards>Military & Aerospace Standards>MIL-STD-462

MIL-STD-462 There are 10 products.

Showing 1 - 10 of 10 items
  • Quick view
    • High insulation resistance over a wide temperature range
    • Excellent stability with long life
    • Built-in discharge resistor for safety
    • Designed for bulkhead or bench mounting
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Provides output levels from 10 V to 600 V into 5 Ω. Delivers more than 300 kW peak into 0.5 Ω load
    • Adjustable pulse position on AC lines relates the transient susceptibility to real time aspects of digital systems
    • Single pulse feature for controlled isolation of transient effects
    • Output terminals for series or parallel injection
    • Includes 2201-1 and 2201-2 transformers
    • Standard rack panel construction: 19" wide x 7" high x 12.75" deep (48.26 cm x 17.78 cm x 32.38 cm)
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • High insulation resistance over a wide temperature range
    • Excellent stability with long life
    • Built-in discharge resistor for safety
    • Designed for bulkhead or bench mounting
    • Comparable to our FTC-10
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Solid State
    • Up to 100 Watts Output
    • Wide Frequency Range
    • Low Input Impedance
    • No Output Transformer
    • Input and Output Protective Circuits
    • Lightweight and Portable
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Primary Less than 5 ohms
    • Secondary 1⁄4 the primary impedance
    • Frequency response 30 Hz to 250 kHz
    • Audio power 200 W
    • Secondary saturation 50 A, AC or DC max.
    • Turns ratio 2-to-1
    Request Quote
    Typical Lead Time 2 - 4 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 500 V to 15 kV peak
    • Transient Pulse Transformer
    • Designed to be plugged into the SERIES terminals of the Solar Model 8282-1 Spike Generator
    • 4.75" wide x 4.35 " high x 4.75" insulated case measuring
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 115 V to 230 V Power Line Voltages
    • Equipped with a male connector on the 115 V winding
    • Female connector on the 230 V winding
    • Connectors are the international style IEC-320/CEE 22
    • Mating plugs not supplied
    • Rated at 800 W, 50-60 Hz

    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Audio Isolation Transformer
    • For conducted audio frequency susceptibility testing
    • Provides a convenient bench model unit with three-way binding posts on primary and output voltmeter leads. Standard 0.75" spacing of binding posts allows use of standard plugs. High current secondary uses 1/4-20 threaded studs.
    • Capable of handling the audio power required by EMI specifications and up to 50 A of AC or DC through the secondary in series with the test sample.
    • May be used as a pickup device or an isolating inductor in other tests.
    • Suitable for fastening to the bench top in permanent test setups.
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • High insulation resistance over a wide temperature range
    • Excellent stability with long life
    • Built-in discharge resistor for safety
    • Designed for bulkhead or bench mounting
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view

    Provides a convenient bench model unit with three-way binding posts on primary and output voltmeter leads. Standard 0.75" spacing of binding posts allows use of standard plugs. High current secondary uses 1/4-20 threaded studs.

    Request Quote
    Typical Lead Time 2 - 4 Weeks
    Request Quote/More Info
    Add to Compare
Showing 1 - 10 of 10 items