Send Enquiry For NX7 Multifunctional Test Generator for Transients up to 7 KV
NX7 Multifunctional Test Generator for Transients up to 7 KV
- EFT/BURST
- SURGE
- POWER FAIL
- RINGWAVE
Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
Voltage Dips and Interruptions Testers
Voltage Dips and Interruptions Testers
Rent or buy used Voltage Dips and Interruptions Testers. The EMC Shop specializes in power quality test and compliance, stocking generators for conducted immunity testing.
Power quality testing and compliance is a key element to for complying to CE, IEC, Mil-STD, DO-160 and more. AC and DC power dips, drops, fails and interruptions are accomplished using fast switching power sources with unique sustainability and preprogrammed waveforms and test routines.
Voltage Dips and Interruptions Testers There are 41 products.
NX7 Multifunctional Test Generator for Transients up to 7 KV
In Stock- EFT/BURST
- SURGE
- POWER FAIL
- RINGWAVE
EM Test PFS 503N32 Power Fail Simulator, 3-phase 3x480V AC (p-p) max. 32A
In Stock- Model PFS 503N32 3x480V AC, max. 32A per phase 277V AC (L-N), 360V DC
- Standalone test generator for dips, short interruptions and voltage variation
- Full-compliant three-phase system as per IEC 61000-4-11, Ed.2:2004 and IEC 61000-4-34 for testing delta and star supply systems
- 6 electronic switches, short-circuit protected
- Rated voltage up to 3x690V AC, 600V DC
Used Teseq NSG 3040
- Rent the Teseq NSG 3040-IEC System
- Includes PQM 3403 module to perform interrupt tests
- Fully IEC 61000-4-2, -4, -5 compliant
- Fully IEC 61000-4-11 & -4-29 compliant
- 16 A single phase CDN
- Multi-function generator for immunity testing in compliance with EN/IEC 61000-4-4,5,11,29 for single phase testing up to 270 V/16 A.
- Up to 4.4kV Surge and 4.8kV EFT/Burst testing
Reduced price!1 AvailablePQF-11/29 Voltage Interruption Simulator for IEC/EN 61000-4-11 and 4-29
In Stock- 280 V AC max.
- 360 V DC max.
- AC-Test: IEC / EN 61000-4-11
- DC-Test: IEC / EN 61000-4-29
- Inrush Current Measurement at any Phase Position 0° - 360 °
- Automatic AC + DC Ramp Function
Rent Chroma 61605 Single Phase AC Power Source
- 4,000 VA, Single Phase
- AC, DC, AC+DC output modes
- DC or 15 Hz to 1 kHz
- Delivers full power with up to 6:1 Crest Factor loads
- Analog signal input, functions as a high-power amplifier
- Programmable voltage, current limit, frequency
- Turn on, turn off phase angle control
- Powerful measurement of Vrms, Irms, Ipk, power, inrush current, frequency, crest factor, power factor, VA, and more
- Input power factor correction
- Combine 3 units for 3-phase power output
- GPIB, RS-232C, Analog Programming Interface Board and Rack Kit included
$1,295.00In StockRent Chroma 61704 3-Phase AC Power Source for MIL-STD-704 and RTCA DO-160 Testing
- Power: 6 kVA
- Voltage: 0 to 150V/0 to 300V
- Frequency: 15 Hz to 1.2 kHz
- Phase angle: 0 to 360°
- Built-in PFC, provides input power factor over 0.98
- Advanced PWM technology delivers high power density in a compact rack-mountable package
- Built-in output isolation relays
- AC+DC output mode
- Programmable slew rate setting for changing voltage
- Turn on, turn off phase angle control
- Optional function for power line disturbance (PLD) simulation capability
- Comprehensive measurement capability: V, Irms, Ipk, I inrush, P, PF, CF of current etc.
- Programmable RMS current limit
- Full protection: OP, OC, OV and OT protection
- Optional GPIB and RS-232C interface
- Easy-use software for operation
To Purchase Chroma 61704
$1,295.00In StockRent Haefely AXOS5 Transient Immunity Test System with Surge and EFT/Burst
- Rentals Ship Immediately
- Price is the monthly rental rate
- Everything to complete Single Phase Testing for:
- Add Haefely IP4B EFT Coupling Clamp
- Add Haefely DIP 116 Voltage Dips Transformer to meet IEC 61000-4-11
$1,650.00Typically In StockHaefely PLINE 1610 Tester for Voltage Dips, Interruptions and Variations
In Stock- Compact and complete test system
- Predefined Tests and Programs
- Testing according to IEC/EN 61000-4-11
- Selectable current limit to protect EUT
- Automatic Test Report generation
- Flexible to meet individual needs
- Remote control via RS-232
- Centronics printer interface
- Fully automatic testing of complex test routines
3ctest PFS 6050A Power Failure Simulator for Automotive Dips & Drops (micro interruption) up to 60V DC
Typically In Stock- As per:
- BMW GS 95003-2
- Chrysler PF-9326
- Fiat 9.90110
- Ford EMC-CS-2009.1
- Chrysler CS-11979 and more
- Standalone test equipment used for voltage dip and short interruption test
- Rising/fall time < 1 us
- With electronic short circuit protection function
- Rated voltage 60V DC
- 5.7 inch color touch screen operation on front panel
- As per:
Teseq NSG 3040-IEC Test System for Surge Combination Wave, EFT/Burst, Dips Interrupts & Variations w/ 16 A CDN
1 Unit Left- Rent the Teseq NSG 3040-IEC System
- Includes PQM 3403 module to perform interrupt tests
- Fully IEC 61000-4-2, -4, -5 compliant
- Fully IEC 61000-4-11 & -4-29 compliant
- 16 A single phase CDN
- Multi-function generator for immunity testing in compliance with EN/IEC 61000-4-4,5,11,29 for single phase testing up to 270 V/16 A.
- Up to 4.4kV Surge and 4.8kV EFT/Burst testing
Haefely DIP 116 Automatic Dips Transformer 16 Amps 40/70/80%
1 Unit Left- 7" / 800 x 480 / 24 bit touch-screen
- Reduction of daily working effort due to easy access menu structure
- Intuitive menu prompting
- Multilingual menus (English, German, French)
- Ethernet and USB connectivity
- Touch screen interface (via AXOS)
- Automatically controlled Voltage Dips for 0/40/70/80[%] (via AXOS)
- LED Light indicator for active Voltage Dips percent
Included
- Test Certificate
- Blue bonding cable 0.25m
- Black bonding cable 0.25m
- Yellow/Green bonding cable 0.25m
- Purple bonding cable 0.25m
- Earth bonding cable 1m
- D-sub 37p cable 1m
