> Manufacturers>Keysight (Agilent)>Keysight (Agilent) EMI Analyzers
Keysight (Agilent) EMI Analyzers

Rent, buy or lease Keysight (Agilent) EMI Analyzers. The EMC Shop specializes in radiated and conducted emissions testing for MIL 461, CISPR, DO-160 and more.

Keysight (Agilent) EMI Analyzers There are 11 products.

Showing 1 - 11 of 11 items
  • Quick view
    • 9 kHz - 3 GHz
    • Automatic EMI measurements
    • High accuracy and response
    • Compatible with the BenchLink Web Remote software
    • Log sweep
    • 5 minute warm-up
    • Built-in preamplifier
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 5 Hz to 3 GHz frequency
    • S-parameter test port (5 Hz to 3 GHz, 50 Ω)
    • Gain-phase test port ( 5 Hz to 30 MHz, 1 MΩ/50 Ω)
    • Wide dynamic range
    • Built-in DC bias source (up to ±40 Vdc)
    • Compact form factor
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Extend frequency up to 110 GHz with Keysight smart mixers
    • Capture transient signals with real-time spectrum analysis
    • Perform deeper troubleshooting with the 89600 VSA software
    • Simplify testing of phase noise, noise figure, LTE-Advanced, WLAN
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rentals ship immediately
    • 1 Hz - 26.5 GHz
    • Real-Time Analysis up to 40 MHz
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461G EMI receiver requirements
    • Purchase a Used Keysight N9038A EMI Receiver here.
    Request Quote
    Call for Availability
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rentals ship immediately
    • 85 MHz Bandwidth Analysis Option (Fastest Testing Possible)
    • Real-Time Analysis up to 85 MHz BW
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
    • Purchase a Used Keysight N9038 EMI Analyzer here.
    Request Quote
    Call for Availability
    Request Quote/More Info
    Add to Compare
  • Quick view
    $995.00
    • Full systems for EMI measurements available
    • Rentals ship in 1-2 Business Days
    • Frequency Range from 9 kHz - 1.5 GHz
    • Current Calibration Cerificate Included
    $995.00
    Add to cart
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $14,012.50 $14,750.00 -5% Used
    • ISO 17025 Calibration from Keysight
    • 25 MHz Bandwidth
    • -170 dBm DANL at 1 GHz
    • Max Dynamic Range 3rd order @ 1 GHz: 112 dB
    • Standard Attenuator Range; 60 dB (10 dB Steps)
    • Measure the smallest signals in the presence of large ones with best-in-class level accuracy, DANL & TOI
    • Perform power measurements quickly at discrete frequency points with list-sweep mode
    • Simplify testing with X-Series measurement apps: phase noise, noise figure, analog demodulation, wireless communications & more
    $14,012.50 $14,750.00 -5%
    Add to cart
    Reduced price!
    1 Unit
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Protects the spectrum analyzer input from damage caused by high-level transients
    • Frequency Range: 9 kHz to 200 MHz
    • Insertion Loss: 10 dB
    • Maximum Input Level: Continuous: 2.5 W (+34 dBm), Pulse: 10 kW for 10 µS, DC:±12 V
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rent the Keysight (Agilent) N9038A-526-B85-RT1
    • 3 dB resolution bandwidths
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
    • ±0.5 dB absolute amplitude accuracy
    • -166 dBm displayed average noise level (DANL) with preamplifier and noise floor extension
    • EMC measurements offering simultaneous detectors, signal lists, scan tables, limit lines, and correction factors
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 100 kHz to 500 MHz / 1.5 GHz / 3 GHz / 4.5 GHz / 6.5 GHz / 8.5 GHz / 14 GHz / 18 GHz
    • Dynamic Range: 117 dB (spec), 122 dB (typical)
    • Output Power: 0 dBm
    • Trace Noise: 0.015 dBrms
    • 2-port, 50 ohm, S-parameter test set, Type-N connectors
    • Sweep Type: Linear and log frequency, Segment sweep
    • Noise Floor: -127 dBm
    • upgrade options at any time
    • Industry-standard ENA Series measurement framework
    • Support for 6 languages via softkey; embedded help manual in English/Simplified Chinese
    • USB Interface standard, GPIB and Handler I/O optional
    • Three-year warranty

    What's Included

    • E5063A ENA vector network analyzer
    • E5063A ENA vector network analyzer Installation guide
    • CD ROM IO libraries
    • Power cable
    • Certificate of calibration
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • E7400A Series EMC Analyzer
    • Close Field Probe Set
    • Biconical Antenna
    • Log Periodic Antenna
    • Line Impedance Stabilization Network (LISN)
    • Amplifier
    • Transient Limiter with High-Pass Filter
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
Showing 1 - 11 of 11 items