> Application/Test Type>Conducted Emissions>Analyzers, Receivers and Scopes
Analyzers, Receivers and Scopes

Most any signal or spectral analysis unit can be used to evaluate the quality of your electrical components and DUT's. Quasi peak detection and EMI filters are offered as options by many manufacturers. EMI Receviers and EMC analyzers have the required hardware and software to help identiry problem areas in both conducted and radiated applications, saving time on pre-certifciation and saving money but better identifing issues that may cause failure at the certification lab.

Analyzers, Receivers and Scopes There are 28 products.

per page
Showing 1 - 12 of 28 items
  • Quick view
    $795.00 Monthly
    • Frequency range from 9 kHz up to 3.2 GHz 7.5 GHz
    • Pre programmed test standards
    • Customizable test routines and report generation
    • (Multiple) Peak Search functionality
    • 1 Hz - 3 MHz Resolution Bandwidth
    • 10” Color Touch Screen
    • <- 98 dBc/Hz Phase Noise
    • < 0.7 dB Total Amplitude Accuracy
    • -165 dBm/Hz Display Average Noise Level
    $795.00
    Add to cart
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $179.00 Rental
    • Frequency range from 9 kHz up to 3.2 GHz 7.5 GHz
    • Built in Preamplifier
    • Pre programmed test standards
    • Customizable test routines and report generation
    • (Multiple) Peak Search functionality
    • 10” Color Touch Screen
    $179.00
    Add to cart
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 500 MHz bandwidth 
    • 2 analog channel models
    • Sample rates up to 5 GS/s real time on all channels
    • 10k record length on all channels
    • 3,600 wfms/s continuous waveform capture rate
    • Suite of advanced triggers
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 9 kHz - 3 GHz
    • Automatic EMI measurements
    • High accuracy and response
    • Compatible with the BenchLink Web Remote software
    • Log sweep
    • 5 minute warm-up
    • Built-in preamplifier
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency of 9 kHz to 6.5 GHz
    • Real Time Bandwidth : 25 MHz (40 MHz)
    • Tracking Generator Included
    • EMI Filter and Dectors
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Voltage Transient Emission Test
    • Voltage Range: 0-30 VDC
    • Rated Current: 25A
    • Short circuit protected max. inrush current: >500 A
    • Peak voltage capability: 1000V
    • Overvoltage protection: by varistors
    • Dimensions: (L x B x H): 425 x 530 x 180 mm
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Analog Channels: 4 + EXT
    • Bandwidth (-3dB) @ 50 Ω: 2GHz *1
    • Rise time@ 50Ω: 230 ps
    • Sample Rates: 5 GSa/s (10 GSa/s ESR) @ each channel
    • 10 Megasample Record Length on All Channels
    • Waveform Capture Rate: Normal mode: 170,000 wfm/s; Sequence mode: 750,000 wfm/s
    • Connections: USB Host 3.0 x2, USB Host 2.0 x2, USB Device 2.0 (USBTMC) x1, LAN(VXI-11/Telnet/Socket)x1, micro SD card x1, Auxiliary output(Pass/Fail, Trigger Out)x1 and HDMI x1

    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view Sale!
    • 10 Hz to 40 GHz 
    • Up to 160 MHz signal analysis bandwidth
    • Convenient, intuitive operation with touchscreen based user interface 5 GHz
    • 0.4 dB level measurement uncertainty up to 7 GHz
    • –110 dBc (1 Hz) phase noise at 10 kHz frequency offset
    • +15 dBm third-order intercept (TOI)
    • Displayed average noise level (DANL) in 1 Hz bandwidth: –155 dBm at 1 GHz, –147 dBm at 30 GHz; with R&S®FSV-B24 preamplifier: –162 dBm at 30 GHz
    • General-purpose measurement applications for phase noise, noise figure, vector signal analysis, analog demodulation, EMI diagnostics
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Sample Rates: 5 GSa/s (10 GSa/s ESR) @ each channel
    • 10 Megasample Record Length on All Channels
    • Waveform Capture Rate: Normal mode: 170,000 wfm/s; Sequence mode: 750,000 wfm/s
    • Connections: USB Host 3.0 x2, USB Host 2.0 x2, USB Device 2.0 (USBTMC) x1, LAN(VXI-11/Telnet/Socket)x1, micro SD card x1, Auxiliary output(Pass/Fail, Trigger Out)x1 and HDMI x1

    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Resolution bandwidth 1 Hz to 10 MHz
    • Displayed average noise level -155 dBm (1 Hz)
    • Phase noise -113 dB (1 Hz) at 10 kHz
    • Total measurement uncertainty 0.5 dB
    • Measurement routines for TOI, ACP(R), OBW, CCDF, APD, etc. as standard
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency range: 5 kHz to 1 GHz, Upgradable to 2 GHz or 3 GHz
    • Resolution bandwidth settings down to 1 Hz
    • 10.1" WXGA (1366 x 768 pixel) display
    • Wi-Fi-enabled w/ remote control (included)
    • Easy virtual control w/ iOS/Android/PC
    • Low noise floor / High max. input power
    • Receiver mode for EMI debugging on circuit boards, integrated circuits, cable shielding, etc.
    • Three-year warranty
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rentals ship immediately
    • 1 Hz - 26.5 GHz
    • Real-Time Analysis up to 40 MHz
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461G EMI receiver requirements
    • Purchase a Used Keysight N9038A EMI Receiver here.
    Request Quote
    Call for Availability
    Request Quote/More Info
    Add to Compare
Showing 1 - 12 of 28 items