Compliance Standards

Compliance Standards There are 115 products.

Subcategories

International (IEC/EN)
The EMC Shop stocks IEC test equipment for compliance on commercial electronics. Rent, buy or lease test equipment for CE, UL or other compliant mark on your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.

Application Support, Pricing, Lead Time & More: Contact Form
Product Standards
Industry specific products include electrical equipment for medical devices, automotive and transportation, and basic consumer products. The EMC Shop will help pinpoint the required test equipment for certifying or evaluating your product in order to obatin certification.
Military & Aerospace Standards
These standards establishes interface and associated verification requirements for the control of the electromagnetic interference (EMI) emission and susceptibility characteristics of electronic, electrical, and electromechanical equipment and subsystems designed or procured for use by activities and agencies of the Department of Defense (DoD).
Automotive EMC Standards
With the rise of electrical vehicles, more emphasis is given to test standards to ensure safety and functionality from component, sub assembly and complete hevicle level. The EMC shop is supplying automotive EMC test equipment for international compliance standards such as ISO 7637 and ISO 16750-2, as well as for manufacturer specific test standards. Most test standards revolve around the conducted immunity for electrical disturbances, but also include applications for wireless RF immunity and emissions.

Automotive EMC Test Equipment
RF Conducted Immunity - Bulk Current Injection (BCI) Method
Radiated Immunity Using a Stripline
Magnetic Immunity using Helmholtz Coil
Immunity to Electrical Fast Transients
Electrostatic Discharge Immunity
CISPR 25 Radiated Emissions

Get Application Support, Pricing, Lead Time and More: CONTACT FORM
CISPR Standards
CISPR Standards set for controlling electromagnetic interference in electrical and electronic devices, and is a part of the International Electrotechnical Commission (IEC).
Telecom Testing
Telecom Testing EMC requirements for information technology & telecommunication equipment.
The EMC Shop stocks electromagnetic environmental equipment for classes of telecommunication equipment covering all relevant electromagnetic environmental parameters. This Recommendation applies to telecommunication equipment installed in telecommunication centres, outdoor locations and customer premises. This is a basic EMC Recommendation for telecommunications.
ANSI/IEEE Standards
The American National Standards Institute (ANSI) is a private non-profit organization that oversees the development of voluntary consensus standards for products, services, processes, systems, and personnel in the United States.
IEEE is an organization composed of engineers, scientists, and students. The IEEE is best known for developing standards for the computer and electronics industry.
FCC Part 15
FCC Part 15 regulates low power, unlicensed devices that could cause interference to the Amateur Radio Service and vice versa.
FCC Part 15 covers an assortment of electronic equipment that generates RF energy whether it's intentional, unintentional or incidental. Amateurs will need to consider Part 15 as it relates to digital devices, computers, low-powered, unlicensed transmitters, electrical devices and any other "generic" device that might generate RF in the normal course of its operation.
Rent, buy, or lease FCC Part 15 test equipment for radiated and conducted emissions measurements. The EMC Shop stocks calibrated equipment.
FCC Part 30
The EMC Shop stocks test equipment solutions to support FCC Part 30 millimeter wave radiated emissions testing, compliance and precompliance.

View:
Grid
List

Previous
1
2
3
...
10
Next

Showing 1 - 12 of 115 items

Quick view
Used Haefely PIM 150 100 kHz & 1 MHz Oscillating Wave Surge Generator
- PSURGE 8000 Mainframe & PIM 150 Module System Meeting:100kHz & 1MHz frequencies
  IEC 61000-4-12 Power & Data lines
  IEC 61000-4-18 Ed.1 D.O.W
  ANSI C37.90.1-2002 Power lines
  IEC 60255-22-1 Measuring relays and protection equipment
  IEEE 1613 Substation Equipment
- Need to Test Now? Rent the Haefely PIM150 System
- Integrated three phase CDN (Single Phase Avail)
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Used Haefely PIM 150 100 kHz & 1 MHz Oscillating Wave Surge Generator

Used Haefely PIM 150 100 kHz & 1 MHz Oscillating Wave Surge Generator
PSURGE 8000 Mainframe & PIM 150 Module System Meeting:100kHz & 1MHz frequencies
IEC 61000-4-12 Power & Data lines
IEC 61000-4-18 Ed.1 D.O.W
ANSI C37.90.1-2002 Power lines
IEC 60255-22-1 Measuring relays and protection equipment
IEEE 1613 Substation Equipment
Need to Test Now? Rent the Haefely PIM150 System
Integrated three phase CDN (Single Phase Avail)
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Schloder M Type CDN's for Disturbance Signals to Unscreened Supply Lines (mains) AC + DC up to 1000V, 100A
- Inquire for specific models available
- Coupling / Decoupling of disturbing signal to unscreened supply lines (mains) AC + DC
- 150 kHz – 80 MHz / 230 MHz
- CDN Connection Types:
- M: Unscreened Supply Lines (Mains)
  AF: Unscreened Non-Balanced Interconnection lines
  T & RJ: Unscreened Balanced Interconnection lines
  CAN-BUS: BUS-Lines
  S, RJ45S, USB, HDMI, FireWire
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For Schloder M Type CDN's for Disturbance Signals to Unscreened Supply Lines (mains) AC + DC up to 1000V, 100A

Schloder M Type CDN's for Disturbance Signals to Unscreened Supply Lines (mains) AC + DC up to 1000V, 100A
Inquire for specific models available
Coupling / Decoupling of disturbing signal to unscreened supply lines (mains) AC + DC
150 kHz – 80 MHz / 230 MHz
CDN Connection Types:
M: Unscreened Supply Lines (Mains)
AF: Unscreened Non-Balanced Interconnection lines
T & RJ: Unscreened Balanced Interconnection lines
CAN-BUS: BUS-Lines
S, RJ45S, USB, HDMI, FireWire
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
SS1G-100 100 Watt RF Power Amplifier 80 MHz - 1 GHz
Class A-linear design
Meets Standard IEC 61000-4-3, ISO 11452 & more
Compact and Robust System
Reduced Thermal Radiation
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For SS1G-100 100 Watt RF Power Amplifier 80 MHz - 1 GHz

SS1G-100 100 Watt RF Power Amplifier 80 MHz - 1 GHz
Class A-linear design
Meets Standard IEC 61000-4-3, ISO 11452 & more
Compact and Robust System
Reduced Thermal Radiation
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
SS1G-500 Solid State Amplifier 80 MHz - 1 GHz with 500 Watts
- High Power
- Class A-linear design
- Meets Standard MIL-STD(s)
- Compact and Robust System
- meets IEC 61000-4-3, ISO 11452, and many other standards
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For SS1G-500 Solid State Amplifier 80 MHz - 1 GHz with 500 Watts

SS1G-500 Solid State Amplifier 80 MHz - 1 GHz with 500 Watts
High Power
Class A-linear design
Meets Standard MIL-STD(s)
Compact and Robust System
meets IEC 61000-4-3, ISO 11452, and many other standards
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
ICOIL-4 Induction Coil for IEC 61000-4-8, 61000-4-9, 61000-4-10
- 1 meter induction coil
- For continuous magnetic fileds
- Up to 360 A/m
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For ICOIL-4 Induction Coil for IEC 61000-4-8, 61000-4-9, 61000-4-10

ICOIL-4 Induction Coil for IEC 61000-4-8, 61000-4-9, 61000-4-10
1 meter induction coil
For continuous magnetic fileds
Up to 360 A/m
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
CP-CF Calibration Fixture for Current Probes
- Frequency Range: 9 kHz - 500 MHz
- For use with BCIP400M BCI Probe or similar
- ISO 11452-4
- IEC 61000-4-6
- Suitable for probes with diameter of 3.2 to 4.4 cm (1.25 to 1.73 inches)
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For CP-CF Calibration Fixture for Current Probes

CP-CF Calibration Fixture for Current Probes
Frequency Range: 9 kHz - 500 MHz
For use with BCIP400M BCI Probe or similar
ISO 11452-4
IEC 61000-4-6
Suitable for probes with diameter of 3.2 to 4.4 cm (1.25 to 1.73 inches)
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
3ctest LDS 200 Load Dump Simulator, for ISO 16750-2 TEST A/B & ISO 7637-2 P5a/P5b, w/ built in 60V/30A Coupler
- ISO 16750-2 TEST A/B
- ISO 7637-2 P5a/P5b
- Generates clipped load dump pulse
- internal adjustable source impedance
- Pulse duration up to 1200ms (internal resistance more than 2 Ω)
- Comply with most international standards and car manufacturer standards
- Built-in 60V/30A coupler
- With the function of current detection and over current protection
- Ethernet, RJ 45, PC control
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For 3ctest LDS 200 Load Dump Simulator, for ISO 16750-2 TEST A/B & ISO 7637-2 P5a/P5b, w/ built in 60V/30A Coupler

3ctest LDS 200 Load Dump Simulator, for ISO 16750-2 TEST A/B & ISO 7637-2 P5a/P5b, w/ built in 60V/30A Coupler
ISO 16750-2 TEST A/B
ISO 7637-2 P5a/P5b
Generates clipped load dump pulse
internal adjustable source impedance
Pulse duration up to 1200ms (internal resistance more than 2 Ω)
Comply with most international standards and car manufacturer standards
Built-in 60V/30A coupler
With the function of current detection and over current protection
Ethernet, RJ 45, PC control
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
LPA7G 290 MHz - 7 GHz Log Periodic Antenna
- Frequency Range: 290 MHz- 7 GHz
- Compact & Lightweight
- Input Power (CW): 1000 Watts
- Gain: 5.8 dBi
- Calibration includes 3m Antenna Factors, Gain & VSWR (Additional Measurements Available Upon Request)
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For LPA7G 290 MHz - 7 GHz Log Periodic Antenna

LPA7G 290 MHz - 7 GHz Log Periodic Antenna
Frequency Range: 290 MHz- 7 GHz
Compact & Lightweight
Input Power (CW): 1000 Watts
Gain: 5.8 dBi
Calibration includes 3m Antenna Factors, Gain & VSWR (Additional Measurements Available Upon Request)
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Surge4-5 Combination Wave Surge Generator per EN/IEC 61000-4-5
- New Units Ship Immediately
- 2 Year Warranty
- 10% off Calibration Service for Life
- Ideal EN/IEC 61000-4-5
- 32 memory locations for custom test sequences
- Built-in 16 Amp Coupling Network AC or DC up to 270V
- Remote Control Software via USB or Fiber Optic
- Configurable with EFT4-4 and PQF4-11
- Integrated 1PH/3-wire CDN
- Color Touch Screen Interface
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For Surge4-5 Combination Wave Surge Generator per EN/IEC 61000-4-5

Surge4-5 Combination Wave Surge Generator per EN/IEC 61000-4-5
New Units Ship Immediately
2 Year Warranty
10% off Calibration Service for Life
Ideal EN/IEC 61000-4-5
32 memory locations for custom test sequences
Built-in 16 Amp Coupling Network AC or DC up to 270V
Remote Control Software via USB or Fiber Optic
Configurable with EFT4-4 and PQF4-11
Integrated 1PH/3-wire CDN
Color Touch Screen Interface
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Rent Teseq NSG 3040-IEC Immunity Generator for Surge, Burst/EFT, and Power Quality
- Rentals Ship Today
- Buy Used Teseq NSG 3040-IEC
- Fully IEC 61000-4-4 compliant
- Fully IEC 61000-4-5 compliant
- Fully IEC 61000-4-11 & IEC 61000-4-29 compliant
- Built-in 16 Amp single phase CDN
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For Rent Teseq NSG 3040-IEC Immunity Generator for Surge, Burst/EFT, and Power Quality

Rent Teseq NSG 3040-IEC Immunity Generator for Surge, Burst/EFT, and Power Quality
Rentals Ship Today
Buy Used Teseq NSG 3040-IEC
Fully IEC 61000-4-4 compliant
Fully IEC 61000-4-5 compliant
Fully IEC 61000-4-11 & IEC 61000-4-29 compliant
Built-in 16 Amp single phase CDN
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
LPA2G 290 MHz - 2 GHz LPDA EMC Antenna
- Compact & Lightweight
- Input Power (CW): 1000 Watts
- Gain: 6.5 dBi
- 3 Year Warranty
- Calibration includes 3m Antenna Factors, Gain & VSWR (Additional Measurements Available Upon Request)
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For LPA2G 290 MHz - 2 GHz LPDA EMC Antenna

LPA2G 290 MHz - 2 GHz LPDA EMC Antenna
Compact & Lightweight
Input Power (CW): 1000 Watts
Gain: 6.5 dBi
3 Year Warranty
Calibration includes 3m Antenna Factors, Gain & VSWR (Additional Measurements Available Upon Request)
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Fischer Custom Communications FCC-801-M3-16A, 3 Line M Series CDN, 150 kHz – 230MHz, 16 Amp
- Fequency Range: 150 kHz - 230 MHz
- Designed for EN/IEC 61000-4-6
Request Quote
More
Inquire for Qty In Stock
Request Quote/More Info
Send Enquiry For Fischer Custom Communications FCC-801-M3-16A, 3 Line M Series CDN, 150 kHz – 230MHz, 16 Amp

Fischer Custom Communications FCC-801-M3-16A, 3 Line M Series CDN, 150 kHz – 230MHz, 16 Amp
Fequency Range: 150 kHz - 230 MHz
Designed for EN/IEC 61000-4-6
First Name Last Name Email Phone Subject Message or
Add to Compare

Previous
1
2
3
...
10
Next

Showing 1 - 12 of 115 items