> Compliance Standards>Automotive EMC Standards>ISO 11452>ISO 11452-4 BCI Test>ISO 11452-4 Radio Frequency (RF) Generators
ISO 11452-4 Radio Frequency (RF) Generators

The EMC Shop speciailizes in Automotive Radiated and Conducted immunity test equipment systems. Rent, buy or lease ISO 11452-4 Radio Frequency (RF) Generators with Modulation Capability.

ISO 11452-4 Radio Frequency (RF) Generators There are 7 products.

Showing 1 - 7 of 7 items
  • Quick view

    • Pure output signals with highes output poer levels and lowest harmonics
    • Frequency range from 8 kHz to 20 GHz
    • Lowest SSB phase noise of -132 dBc (typ) at 10 GHz and 30 MHz offset
    • Maximum output power exceeds 30 dBm across wide frequency ranges
    • Exceptionally low harmonics
    • State-of the art GUI with touch display
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency up to 6 GHz
    • 001 Hz frequency setting resolution
    • Maximum output power up to +26 dBm (typ.)
    • Phase Noise: -120 dBc/ Hz @ 1 GHz, 20 kHz offset (typ.)
    • User programmable flatness correction
    • Provides AM, FM, PM analog modulation with internal, external or Int+Ext source
    • Single pulse, double pulse and pulse train generator (option)
    • Internal IQ modulation with 150 MHz modulation bandwidth with perfect in-factory calibration

     

     

    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 9 kHz to 2.4 GHz Frequency Range
    • Linear and Logarithmic Sweep Mode
    • RS232 & GPIB Control
    • Small footprint for bench or rack use
    • Reverse Power Protected to 50 W
    • 1 Hz Resolution
    • -140 to +13 dBm Peak RF output level with 0.1 dB Resolution
    • AM, FM, Amplitude, Phase, Pulse, FSK Modulation
    • 3.9 kHz Bessel filtered FSK
    • Sine, Triangular and Square Two-Tone Modulation Source
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Wide frequency range from 9 kHz to 6 GHz
    • Excellent signal characteristics with low SSB phase noise of typ. –128 dBc
    • All important analog modulations with AM, FM/φM and pulse modulation supported
    • All-purpose signal source
    • Best signal quality in the mid-range
    • High output power and wide level range

     

     

    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range 9 kHz to 2.08 GHz
    • Frequency Resolution 1 Hz
    • Level Range -140 to +13 dBm, Over Range up to 19 dBm
    • Level Accuracy Better than 1 dB
    • SSB Phase Noise <-114 dB at 1 GHz, Δf = 20 kHz
    • AM, FM, phiM, and Pulse Modulation
    • Modulation Generator 1 Hz to 500 kHz
    • RF Overload Protection 50 W
    • Low RF Leakage (<0.1 µV)
    • Non-volatile Storage for up to 50 Complete Front-panel Setups
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Used unit comes with 6 month warranty
    • NIST Calibration Certificate
    • Digital sweep in discrete steps
    • 9 kHz to 6 GHz
    • Frequency, level and LF sweeps
    • AM, broadband FM/phase (optional), pulse modulation
    • Includes Rear Connectors R&S® SMA-B81
    • Built-in LF generator up to 1 MHz
    • Very low SSB phase noise
    • Very short frequency and level setting times
    • Fast hopping mode
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
Showing 1 - 7 of 7 items