Electric E-Field Probes up to 18 GHz

Rent, buy or lease Electric E-Field Probes up to 18 GHz. The EMC Shop specializes in monitoring field strength levels during RF immunity testing. Electric E-Field Probes up to 6 GHz

Electric E-Field Probes up to 18 GHz There are 11 products.

Showing 1 - 11 of 11 items
    • 2 V/m to 1,000 V/m
    • +/- 1.5 dB to 18 GHz Response
    • Laser powered for continuous use.
    • Interfaces with the FM7004A field monitor
    • Usable with VM7000 virtual monitor
    • Automatic Temperature compensation
    • USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic
    Typically in Stock
    Request Quote/More Info
    • 10 KHz - 3 GHz frequency range
    • 0.3 - 600 V/m
    • Compact Size
    • Diode based: 3-Axial isotropic sensor
    • Operates with RFM High Performance Broadband Radiation Field Meter
    Typically In Stock
    Request Quote/More Info
    • 100 MHz - 18 GHz frequency range
    • 70-1400 V/m 
    • Operates with RFM high performance broadband radiation field meter
    • Fast sampling detection for MIL-STD-461, automotive EMC GM and Ford 
    Typically In Stock
    Request Quote/More Info
    • 3 MHz - 18 GHz frequency range
    • 0.8-800 V/m CW
    • Operates with RFM high performance broadband radiation field meter
    • EMC and RF safety standards for industrial, military and radar communication applications
    Typically In Stock
    Request Quote/More Info
    • 200 KHz - 3 GHz frequency range
    • 0.2 - 600 V/m 
    • Compact Size
    • Diode based: 3-Axial isotropic sensor
    • Operates with RFM High Performance Broadband Radiation Field Meter
    Typically In Stock
    Request Quote/More Info
    • 2-1000 V/m
    • Accurate field measurements ensure EMC lab measurements meet test standard requirements
    • Separable-axis field probe capable of measuring both continuous wave & pulse electric fields
    • Use of laser to deliver power-over-fiber allows continuous operation without recharging or replacing batteries
    Rental Available
    Request Quote/More Info
    • 1 V/m to 1,000 V/m
    • +/- 1.8 dB Flatness
    • Laser powered
    • Small size permits use in TEM cells and is less disruptive to the RF field
    • User friendly interfaces with the FM7004 field monitor and/or VM7000 virtual monitor software
    • USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic Serial
    • Automatic Temperature compensation
    Typically in Stock
    Request Quote/More Info
    • Flat frequency response
    • Diode sensors
    • Isotropic characteristic
    • Multi-point calibration
    • Modular, can be used with any NBM basic unit
    • For use with Narda NBM-520 or NBM-550
    In Stock
    Request Quote/More Info
  • PMM EP-183 Isotropic E-Field Sensor 1 MHz - 18 GHz, 800 V/m. Sensitivity: 0.8 V/m, traceable calibration. Requires OR-03.

    Typically Stocked
    Request Quote/More Info
    • 300 kHz to 18 GHz
    • Up to 60 dB dynamic, single range
    • 0.17 to 170 V/m (350 V/m Overload)
    • Symmetrical dipole configuration
    • Excellent isotropy (down to 0.4 dB typical)
    • Up to 80 hours of operation before recharging
    • High performance, high reliability Li-Mn battery
    • PC direct connection via Optical to RS232/USB adapters
    • Weighs less than an ounce
    Typically Stocked
    Request Quote/More Info
    • 3MHz-18GHz frequency range
    • Compact Size
    • Diode based: 3-Axial isotropic sensor
    • Operates with both RFP-04 and RFP-05 meters
    In Stock
    Request Quote/More Info
Showing 1 - 11 of 11 items