Send Enquiry For LISN-MIL461-100A Line Impedance Stabilization Network
LISN-MIL461-100A Line Impedance Stabilization Network
- Meets MIL-STD-461 LISN Requirements
- Single Line
- 10 kHz - 10 MHz,
- 50μH
- Power Handling: 100 Amps 400VDC/270VAC
Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
MIL-STD-461 RE102
MIL-STD-461 RE102
Test Equipment
Antenna 30 MHz to 200 MHz, Biconical
Antenna 200 MHz to 1 GHz, Double ridge horn
Antenna 1 GHz to 18 GHz, Double ridge horn
Stub radiator
Capacitor, 10 pF
Data recording device
MIL-461 RE102Overiview
Radiated emissions, electric field.
This requirement is applicable for radiated emissions from equipment and subsystem enclosures, and all interconnecting cables. For equipment with permanently mounted antennas this requirement does not apply at the transmitter fundamental frequencies and the necessary occupied bandwidth of the signal.
This test procedure is used to verify that electric field emissions from the EUT and its associated cabling do not exceed specified requirements.
MIL-STD-461 RE102 There are 16 products.
LISN-MIL461-100A Line Impedance Stabilization Network
In Stock- Meets MIL-STD-461 LISN Requirements
- Single Line
- 10 kHz - 10 MHz,
- 50μH
- Power Handling: 100 Amps 400VDC/270VAC
LISN-MIL461-100D Dual Line Impedance Stabilization Network
- Meets MIL-STD-461 LISN Requirements
- Dual Line
- (2)10 kHz - 50 MHz, 50μH in one box
- Power Handling: 100 Amps 400VDC/270VAC
- 4 Year Warranty
- American Made
$5,400.00In StockDRHA18G-PA 18 GHz Dual Rigged Horn Antenna
In Stock- 1 GHz to 18 GHz Frequency Range
- Designed for MIL-STD 461
- Fitted with Pre-Amplifier for Increased Sensitivity
- Pre-Amplifier and Antenna Calibrated as a Single Unit
- Extremely Low AF Flexible Mounting
- Not intended for RSE Testing of Intentional Radiators
Keysight (Agilent) N5183A Microwave Analog Signal Generator, 100 kHz to 40 GHz
- Frequency coverage to 40 GHz
- Fast frequency and amplitude switching speed (< 900 μs, 600 μs typ)
- Fast switching frequency and amplitude switching
- High power (+18 dBm to 3.2 to 20 GHz)
- AM, FM, phase modulation
- Pulse modulation
- Instrument security
- Price includes accredited calibration
Included in the refurb model:- 540 – 100kHz to 40GHz Frequency Range
- 1E1 – Mechanical attenuator
- 1EA - High Power Output
$68,000.00In StockLISN-MIL461-100 Line Impedance Stabilization Network
- Meets MIL-STD-461 LISN Requirements
- Single Line
- 10 kHz - 50 MHz, 50μH
- Power Handling: 100 Amps 400VDC/270VAC
- 4 Year Warranty
- American Made
$2,450.00In StockLISN-MIL461A-100 Appendix A in MILSTD 461 Line Impedance Stabilization Network
In Stock- Meets MIL-STD-461G Appenix A Specifications LISN & RTCA DO-160 (w/external 10uF capacitor) Requirements
- Single Line
- 150kHz – 400 MHz, 5μH
- Power Handling: 100 Amps
- 4 Year Warranty
- American Made
BA330 EMI Biconical Antenna, 20 MHz - 330 MHz
Typically In Stock- Suitable for Radiated Emissions Testing
- Folding elements for simple transport
- Antenna Factor: 8.5 to 21.5 dB/m
- 3 Year Warranty
DRHA18G 1 GHz - 18 GHz Horn Antenna, High Power Handling
Typically In Stock- 1 GHz to 18 GHz Broad Frequency Range
- Achieve 200 V/m per MIL-STD 461 RS 103 and other standards.
- Maximum Continuous Power: 200 Watts
- VSWR (average): <1.5:1
- Impedance: 50 ohm
- Connector: Type-N (f)
Rent Keysight N9048B CISPR 16 EMI Receiver
Call for Availability- Rentals ship immediately
- 1 Hz - 26.5 GHz
- Real-Time Analysis up to 40 MHz
- Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
- Meets CISPR 16-1-1: 2010 and MIL-STD-461G EMI receiver requirements
- Purchase a Used Keysight N9038A EMI Receiver here.
Rent Keysight (Agilent) N9038A-526-B85-RT1 EMI CISPR Compliant Test Receiver
Call for Availability- Rentals ship immediately
- 85 MHz Bandwidth Analysis Option (Fastest Testing Possible)
- Real-Time Analysis up to 85 MHz BW
- Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
- Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
- Purchase a Used Keysight N9038 EMI Analyzer here.
Com-Power AH-220 Double Ridge Horn Antenna 200 MHz to 2 GHz
Typically In Stock- Broadband: 200 MHz to 2 GHz
- Transmit and receive capabilities
- Individual calibration
- Three year warranty
- 800 Watts of CW Power Handling
BA330MEP Portable Emissions Biconical Antenna, 20 MHz - 330 MHz
Typically In Stock- Ships Same Day
- Ideal for compliance emission testing
- Conventional VHF broadband test antenna
- Lightweight and compact
- Excellent balance
- Low measurement uncertainty
