With the rise of electrical vehicles, more emphasis is given to test standards to ensure safety and functionality from component, sub assembly and complete hevicle level. The EMC shop is supplying automotive EMC test equipment for international compliance standards such as ISO 7637 and ISO 16750-2, as well as for manufacturer specific test standards. Most test standards revolve around the conducted immunity for electrical disturbances, but also include applications for wireless RF immunity and emissions.
RF Conducted Immunity - Bulk Current Injection (BCI) Method
Radiated Immunity Using a Stripline
Magnetic Immunity using Helmholtz Coil
Immunity to Electrical Fast Transients
Electrostatic Discharge Immunity
Get Application Support, Pricing, Lead Time and More: CONTACT FORM
Subcategories
The EMC Shop stocks automotive test equipment for compliance to ISO 7637-2. Buy, rent or lease turnkey test solutions with automated software for easy test setup and execution.
Pulse 1.
A simulation of transients due to supply disconnection from inductive loads; it applies to a DUT if as used in the vehicle, it remains connected directly in parallel with an inductive load.
Pulse 2a.
Simulates transients due to sudden interruption of currents in a device connected in parallel with the DUT due to the inductances of the wiring harness.
Pulse 2b.
Simulates transients from DC motors acting as generators after the ignition is switched off.
Pulse 3a/3b.
Occurs as the result of switching processes. The characteristics of this pulse are influenced by distributed capacitance and inductance of the wiring harness.
Pulse 4.
The voltage reduction caused by energizing the starter motor circuits of the internal combustion engines.
Pulse 4 variants.
Most manufacturer variations of pulse four are generally much more complicated. For example Ford requires up to four arbitrary generators with four outputs to be perfectly synchronized.
Pulse 5.
Simulation of a load dump transient occurring in the event of a discharged battery being disconnected while the alternator is generating charging current with other loads remaining on the alternator circuit at this moment.
Magnetic field immunity.
Simulates magnetic fields generated by electric motors, daytime running lamps, etc. for DUTs with magnetically sensitive devices.
Transformer coupled sine waves.
Sinusodial noise coupled on battery lines. Often referred to as ground shift.
3ctest Autolab allows for standard ISO 7637-2 test pulses as well as manual parameters changes for custom or manufacturer specific tests.
Get Application Support, Pricing, Lead Time and More: Contact Form
ISO 7637-3 applies to road vehicles fitted with nominal 12 V or 24 V electrical systems. Rent, buy or lease ISO 7637-3 Test Pulse Generators for Electrical Transient Testing on Road Vehicles. The EMC Shop specializes in automotive compliance testing.
ISO 7637-3 defines test methods to evaluate the immunity of devices under test (DUTs) to transient pulses coupled to lines other than supply lines. The test pulses simulate both fast and slow transient disturbances caused by the switching of inductive loads and relay contact bounce.
For transient pulses immunity, Annex B provides recommended test severity levels in line with the functional performance status classification (FPSC) principle described in ISO 7637‑1.
ISO 10605:2008 describes test procedures for evaluating both electronic modules on the bench and complete vehicles. It also describes a test procedure that classifies the ESD sensitivity of modules for packaging and handling. ISO 10605:2008 applies to all types of road vehicles regardless of the propulsion system (e.g. spark-ignition engine, diesel engine, electric motor).
ISO 10605:2008 is based in part on IEC 61000-4-2 and describes vehicle-specific requirements.
ISO 10605:2008 does not apply to pyrotechnic modules.
ISO 11452 consists of the following parts, under the general title Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy:
This part of ISO 16750 applies to electric and electronic systems/components for road vehicles. ISO 16750-2 describes the potential environmental stresses and specifies tests and requirements
The EMC Shop specializes in automotive transient test equipment. Rent, buy or lease ISO 16750-2 load dump generators and other test equipment.
IEC 61851-21 EMC test equipment for electric vehicle charging stations. Contact The EMC Shop for more more information.
IEC 61851-22 EMC test equipment for electric vehicle charging stations. Contact The EMC Shop for more more information.
EMC/EMI Testing Services Automotive EMI/EMC Testing ISO 16750-2 Load Dump Generators
The EMC Shop stocks a wide selection of automotive compliance testing equipment utilized to meet Ford EMC-CS-2009 requirments. Rent or buy test systems for specific test sections or send your DUT to us for precompliance screening.
Get Application Support, Pricing, Lead Time and More: CONTACT FORM
Automotive transient generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.
The EMC Shop specializes in automotive radiated and conducted emissions and susceptibility testing. Rent, buy or lease Ford FMC1278 EMC test equipment.
Rent, buy or lease GMW 3097 Test Equipment. The EMC Shop specializes in electromagnetic compatibility of electronic components for passenger vehicles and light duty trucks.
Rent, buy or lease GMW3172 Automotive Transient Immunity Testing Equipment.The EMC Shop specializes in compliance testing on road vehicles.
The EMC Shop typically has load dump simulators compliant to SAE J1455 in stock, calibration, equipped with a laptop and software (not standard) and ready to ship that day. Rent, buy or lease SAE J1455 Load Dump Test Equipment at The EMC Shop, a company specializing in automotive electrical conducted disturbance test solutions. Check out all of our Automotive EMC Test Equipment solutions.
Transient Generators with Coupling Capability
Rent, buy or lease UL 2231-2 Section 24 Electric Vehicle (EV) Supply Circuits: Particular Requirements for Protection Devices for Use in Charging Systems.
Rent, buy or lease UNECE Regulation 10 Test Equipment. The EMC Shop specializes in vehicle radiated and conducted emissions and immunit testing.
EMC/EMI Testing Services Automotive EMI/EMC Testing ISO 16750-2 Load Dump Generators
SAE J-1113 Surface Vehicle Standard for “ELECTROMAGNETIC COMPATABILITY MEASUREMENT PROCEEDURES AND LIMITS FOR VEHICLE COMPONENTS (EXCEPT AIRCRAFT) (60 HZ TO 18 GHZ)". The EMC Shop specializes in electromagnetic compatibility measurement and testing on vehicle components. Rent, buy or lease test equipment for SAE J-1113 sections below.
Get Application Support, Pricing, Lead Time and More: CONTACT FORM
J-1113-1: General description and Definitions.
J-1113-4 Conducted Immunity- Bulk Current Injection (BCI) Method
J-1113-11: Immunity to Conducted Transients on Power Leads
J-1113-12: Electrical Interference by Conduction and Coupling- Coupling Clamp
J-1113-13: Immunity to Electrostatic Discharge
J-1113-21: Road Vehicles- Electrical Disturbances by Narrowband Radiated Electromagnetric Energy Component Test Methods – Absorber Lined Chamber
J-1113-2: Conducted Immunity, 30 Hz to 250 kHz, Power Leads.
J-1113-3: Conducted Immunity, 250 kHz to 500 MHz, Direct Radio Frequency (RF) Power Injection.
J-1113-22: Immunity to Radiated Magnetic Fields from Power Lines
J-1113-23: Immunity to Radiated Electromagnetic Fields, 10 kHz to 200 MHz, Strip Line Method
J-1113-24: Immunity to Radiated Electromagnetic Fields, 10 kHz to 200 MHz, TEM Cell Method
J-1113-25: Immunity to Radiated Electromagnetic Fields, 10 kHz to 500 MHz, Tri-plate Line Method
J-1113-26: Immunity to AC Power Line Electric Fields
J-1113-27: Immunity to Radiated Electromagnetic Fields Reverberation Chamber Method
J-1113-28: Immunity to Radiated Electromagnetic Fields - Reverberation Method (Mode Tuning)
J-1113-41: Test Limits and methods of Measurement of Radio Disturbance Characteristics from Vehicle Components and Modules, Narrowband, 150 kHz to 1000 MHz
J-1113-42: Conducted Transient Emissions
LV 123 is a harmonized document of test requirements of all German OEMs: ∕ Audi, BMW, Daimler, Porsche and VW. The EMC Shop stocks test systems for testing and compliance to LV 123.
