> Compliance Standards>Military & Aerospace Standards

Military & Aerospace Standards

Quick Links

Information

Military & Aerospace Standards
These standards establishes interface and associated verification requirements for the control of the electromagnetic interference (EMI) emission and susceptibility characteristics of electronic, electrical, and electromechanical equipment and subsystems designed or procured for use by activities and agencies of the Department of Defense (DoD).

Military & Aerospace Standards There are 69 products.

Subcategories

  • AECTP 500 (STANAG 4370)

    Rent, buy or lease AECTP 500 (STANAG 4370) Test Equipment. The EMC Shop specializes in turnkey test systems for military radiated and conducted emissions and susceptibility.

  • MIL-STD-461

    Test equipment for all versions of MIL-STD-461 including Version G released Decemeber 2015.

    MIL-STD-461 Emission and Susceptibility Testing Breakdown

    Conducted emissions requirements are designated by CE

    Radiated emissions requirements are designated by RE

    Conducted susceptibility requirements are designated by CS

    Radiated susceptibility requirements are designated by RS

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • MIL-STD-462
  • MIL-STD-464 HERO Testing

    Rent, buy or lease MIL-STD-464 HERO Test Equipment. The EMC Shop specializes in Military and avionics electromagnetic compliance testing.

  • RTCA DO-160

    DO-160, Environmental Conditions and Test Procedures for Airborne Equipment is a standard for the environmental testing of avionics hardware. It is published by the Radio Technical Commission for Aeronautics (RTCA).

    Common RTCA DO-160 Test Equipment:

    Lightning Surge Test Systems

    Line Impedance Stabilization Networks (LISN's)

    Current Injection Probes

    AC Power Sources & more

    Get Application Support, Pricing, Lead Time and More: Contact Form

per page
Showing 61 - 69 of 69 items
  • Quick view
    • Frequency Range: 1 MHz - 1 GHz
    • Rugged Design
    • IEC 61000-4-6
    • Mil-STD 461D/E/F

    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range: 190 MHz - 7 GHz
    • Maximum Continuous Power: 400 Watts
    • Impedance: 50 Ohms
    • Typical VSWR: 1.7:1 (Max: 3.4:1 at 190 MHz; >2.1:1 at 6 to 7 GHz) 
    • Max Radiated Field: 100 V/m
    • Pattern Type: directional
    • Connector: N-Type female
    • Individually Calibrated (1, 3 and 10 Meter calibration included, horizontal polarization)
    • FCC, MIL-STD, VDE and TEMPEST Testing
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range: 190 MHz - 4 GHz
    • Maximum Continuous Power: 400 Watts
    • Impedance: 50 Ohms
    • Typical VSWR: 1.5:1 (Max: 2.6:1 at 190 MHz; >2.1:1 at 3.75 to 4 GHz) 
    • Max Radiated Field: 100 V/m
    • Pattern Type: directional
    • Connector: N-Type female
    • Individually Calibrated (1, 3 and 10 Meter calibration included, horizontal polarization)
    • FCC, MIL-STD, VDE and TEMPEST Testing
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range: 190 MHz - 2000 MHz
    • Maximum Continuous Power: 400 Watts
    • Impedance: 50 Ohms
    • Typical VSWR: 1.6:1 (Max: 2.5:1 at approx. 250 MHz; 2.1:1 at approx. 1550 MHz) 
    • Max Radiated Field: 100 V/m
    • Pattern Type: directional
    • Connector: N-Type female
    • Individually Calibrated (1, 3 and 10 Meter calibration included, horizontal polarization)
    • FCC, MIL-STD, VDE and TEMPEST Testing
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range: 170 MHz - 3 GHz
    • Antenna Factor: 11 to 33 dB/m
    • Gain: 0 to 10.9 dBi
    • Maximum Continuous Power: 800 Watts
    • Impedance: 50 Ohms
    • Max Radiated Field: 200 V/m (500 V/m with optional 7/16 DIN female connector)
    • Connector: N-Type, female
    • Receive and Transmit
    • Individually Calibrated (1, 3 & 10 Meter calibration included, horizontal polarization)
    • Linearly Polarized
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Modular design 
    • Single rack portability 
    • Programmable single stroke, multiple stroke, multiple burst waveforms 
    • Pin injection, cable bundle injection, ground injection up to Level 3 
    • Self-contained microprocessor control 
    • LCD system display
    • lightning induced transient susceptibility testing
    • requirements of RTCA/DO-160E/F/G Section 22 are met at Levels 1 through 3
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Single generator output for CS114, CS115 and CS116 tests allowing remote test automation
    • Automatic calibration for each test and for the full test frequency range
    • Automatic configuration of the measurement equipment settings
    • Built-in scroll-down menus for selecting test equipment and components
    • Test and calibration reports automatically generated
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Easily adjust and redirect EMC antenna
    • Leveling bubble
    • Metal construction
    • Standard 1/4-20 mounting threads
    • 4" mounting surface
    • Weight: 0.7 lbs (317g)
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $1,450.00

    How to Rent RF Amplifiers:

    • Click "Add to Cart" above
    • Shipping Section - Select "Use My Account" - we ship this system freight to keep it upright. Indicate in the Notes section if you'd like us to facilitate shipment or if your logistics team will do so.
    • Checkout Accordingly
    • An EMC Shop representative will contact you with shipping estimates or logistics details.
    $1,450.00
    Add to cart
    In Stock
    Request Quote/More Info
    Add to Compare
Showing 61 - 69 of 69 items