> EMC Test Equipment>Transient Generators>Electrostatic Discharge (ESD) Guns>16 kV ESD Simulators>Rent EM Test Dito 16.5 kV ESD Simulator for IEC/EN 61000-4-2

16 kV ESD Simulators

Quick Links

Information

Viewed products

Rent EM Test Dito 16.5 kV ESD Simulator for IEC/EN 61000-4-2 View larger

Rent EM Test Dito 16.5 kV ESD Simulator for IEC/EN 61000-4-2

Used

  • Most ergonomic design
  • Light weight (870g)
  • Interchangeable discharge tips
  • Interchangeable R/C networks
  • LiFePO4 power booster to perform long duration tests
  • Library of standard test routines
  • Test voltage measurement and control
  • Various test routines for testing and evaluation
  • Rentals Ship Immediately
  • In Stock, Calibrated and Ready to Ship
  • Prices are on a Per Month Basis

More details

Typically In Stock

Request Quote

Request Quote/More Info

PDF Downloads

EM Test Dito Data Sheet

PDF Downloads (1.6M)

Specifications

Supply VoltageMore than 70,000 pulses @ 16.5kV; automatic power-off after 10 minutes if not operated LiFePo4 12.8V - 1000mAh
Standards MetIEC/EN 61000-4-2, ISO 10605
Operating Temperature5°C - 40°C
Electrostatic Discharge
Pulse conforms to IEC 61000-4-2 edition 2
ParameterValue
Contact Discharge Voltage Range500V - 10,000V +/-5%
Air Discharge Voltage Range500V - 16,500V +/-5%
Additional AccessoriesDM1 150pF/330ohm discharge module PowerPack dito Rechargeable battery LiFePo4 12.8V - 1000mAh Battery charger Transportation case, grounding lead 2m, test certificate and operation manual
OutputsCD mode EN/IEC 61000-4-2; 150pF/330ohm
Rise Time0.8ns +/- 25%
Resolution100V steps
Trigger
Automatic + Manual
ParameterValue
Holding TimeMore than 5 seconds
Output levelsee data sheet
General Data
Technical Details
ParameterValue
Weight870 gramms incl. battery

Test Equipment Description

How to Rent the EM Test Dito 16.5 kV ESD Simulator:

  • Click "Add to Cart" above
  • Shipping Section - Select "Use My Account" - we ship this system freight to keep it upright. Indicate in the Notes section if you'd like us to facilitate shipment or if your logistics team will do so.
  • Checkout Accordingly
  • An EMC Shop representative will contact you with shipping estimates or logistics details.
Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls. Voltages of several 1,000 volts are generated. dito is an advanced ESD tester to simulate ESD pulses as per EN/IEC 61000-4-2 and other standards requirements

Compliance Standards Met:

  • EN 61000-4-2
  • IEC 61000-4-2
  • ISO 10605
  • ITU-T K.20
  • ITU-T K.21
  • ITU-T K.45
  • MIL STD 461 G CS 118
  • And many more!

Associated EMC Test Equipment

7 other products in the same category: