Viewed products
Runs on standard 120VAC (up to 240V...
New
Typically In Stock
Warning: Last items in stock!
Availability date:
Frequency Range | 18 GHz - 40 GHz |
Gain | 20 dB typical (15 dB minimum) |
Application/Test Type | Overcome attenuation problems at higher frequencies. |
Input | 100/220 VAC regulated P/S output: 12 VDC 170 mA |
Maximum Continuous Power | +6 dBm @ 1 dB compression |
Connector | 2.9mm(f) to 2.9mm(f) |
Dimensions | 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm) |
VSWR | less than 1.7:1 typical |
Weight | 1.1 lbs. / 0.5 kg |
The PA40G is a millimeter-wave low noise amplifier with a typical smsall signal gain of 40 dB and a nominal noise figure of 3 dB across the frequency range of 18 to 40 GHz. The millimeter-wave low noise RF amplifier is suitable or benchtop use or can be mounted on an antenna mast, rack or other assembly with a straightline feedthrough. The PA40G is designed for use in radiated emissions testing such as MIL-STD 461 RE103.
The PA40G can be powered using a standard wall outlet, with a voltage range 100 to 240 VAC for use anywhere in the world. The LED light helps to indicate the working status of the amplifier. The RF input and output ports are female K 2.92 mm connectors.