Viewed products
1 GHz to 18 GHz Frequency Range...
New
Warning: Last items in stock!
Availability date:
Model DRHA18G fitted with an updated pre-amplifier package and calibrated as a single
unit. In this configuration, any possible mismatches between antenna and pre-amplifier
are taken into account in the antenna factor (AF) which is provided with this unit. Please
note, the DRHA18G is not intended for RSE testing of intentional radiators.
• FREQUENCY RANGE
This antenna covers the 1 GHz to 18 GHz range making it ideal as a receive antenna for any emissions testing above 1 GHz.
• DESIGNED FOR MIL-STD-461
DRHA18G Dual Ridged Horn Antenna, (without pre-amplifier) is identical to the antenna described in MIL-STD-461 RE102, for emissions testing above 1 GHz.
• FITTED AMPLIFIER
The pre-amplifier has a frequency range of 1 GHz to 18 GHz and a typical gain of 28 dB. The gain flatness across the range is 2.5 dB. The pre-amplifier has a maximum noise figure of 4 dB maximum with the typical noise figure being 3 dB. The power output is +17 dB minimum at the 1 dB point. The input and output characteristics of the pre-amplifier are an input and output VSWR of 2: 1 maximum.
• CALIBRATED AS SINGLE UNIT
The DRHA18G is calibrated as a single unit, so uncertainty values are reduced.
PHYSICAL SPECIFICATIONS | |
---|---|
Length | 36.1 cm (14.21 in) |
Width | 24.2 cm (9.53 in) |
Height | 24.8 cm (9.76 in) |
Weight | 2.5 kg (5.51 lb) |
ELECTRICAL SPECIFICATIONS | |
---|---|
Frequency Minimum | 1 GHz |
Frequency Maximum | 18 GHz |
VSWR (Average) | N/A (Rx Only) |
Impedance (Nominal) | 50 |
Connector (Amplifier Output) | SMA (Female) |
Pattern Type | Directional |
Polarization | Linear |