> Application/Test Type>Conducted Emissions>Agilent (HP) 84115EM EMC Precompliance Test System

Conducted Emissions

Quick Links

Information

Viewed products

Agilent (HP) 84115EM EMC Precompliance Test System View larger

Agilent (HP) 84115EM EMC Precompliance Test System

New

  • E7400A Series EMC Analyzer
  • Close Field Probe Set
  • Biconical Antenna
  • Log Periodic Antenna
  • Line Impedance Stabilization Network (LISN)
  • Amplifier
  • Transient Limiter with High-Pass Filter

More details

Typically In Stock

Request Quote

Request Quote/More Info

Test Equipment Description

Agilent (HP) 84115EM Description:

The EMC Shop makes ordering your EMC precompliance system easy. The 84115EM provides the
tools and accessories you need to perform radiated and conducted emissions measurements to test
your product to the major commercial regulatory agency requirements. In addition, the system
provides the troubleshooting tools you need to locate emission hot spots.
  • Preprogrammed, automated measurements that require no special knowledge or training, so you can begin making EMC measurements as soon as your EMC precompliance analyzer arrives.
  • Interactive software that allows you to perform test from your PC, or capture measurements made directly from the front panel.
  • Automatic remeasure functions for consistent repeatable results.
  • A variety of measurement tools and accessories available with our packaged precompliance systems.

Agilent (HP) 84115EM Includes:

Agilent E7400 A series portable EMC analyzer.
The heart of the EMI precompliance measurement system is the Agilent E7400 A series portable EMC analyzer. This analyzer has all the capabilities needed to perform EMI measurements including quasi peak detectors, average detectors, and EMI bandwidths. The E7400 A series is offered in two different models to better meet your needed frequency range.
Agilent biconical antenna
Agilent 84115EM-11955A biconical antenna This economical antenna has typical antenna factors. Standard component of the 84115EM EMC precompliance test system.
Agilent log periodic antenna
Agilent 84115EM-11956A log periodic antenna This economical antenna has typical antenna factors. Standard component of the 84115EM EMC precompliance test system.
Agilent 10 Amp line impedance stabilization network
Agilent 84115EM-11967D 10 Amp line impedance stabilization network This V-network, two line, single phase line impedance stabilization network (LISN) meets the requirements of the FCC, VDE, and the European Norms (ENs) for commercial conducted emissions testing. NEMA power outlet comes standard with the product.
Agilent close field probe set
Agilent 84115EM-11945A close field probe set
The 11945A close field probe set includes both the 11940A and 11941A probes to provide full coverage from 9 kHz to 1 GHz. This set provides a powerful measurement tool for electrical and mechanical designers who want to search for and eliminate sources of interference from their products early in the design process. Option 11945A-E51 adds 11909A preamplifier, a 36 inch (914 mm) Type-N cable and a carrying bag to store and protect the entire set of probes, preamplifier, and cables.
Agilent transient limiter
Agilent 84115EM-11947A transient limiter (sold separately as 11974A)
In precompliance applications where a spectrum analyzer is used for measurements instead of an EMI receiver, it is always a good idea to use a transient limiter. Transient limiters protect the spectrum analyzer input from damage caused by high-level transients from line impedance stabilization networks (LISNs) during EMI testing for conducted emissions.
Agilent microwave preamplifier
Agilent 8449B microwave preamplifier A high-gain, low-noise preamplifier to provide additional sensitivity for MIL-STD radiated measurements.

Associated EMC Test Equipment

30 other products in the same category: