Messtechnik optoCAN-HS for Optical Transmission of CAN Signals

The optoCAN-HS system can be used for the bidirectional optical transmission of CAN-signals with transmission rates of up to 1Mbit/s. It consists of two identical battery supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

One side of the system can be integrated in a 19" rack housing (optional). If the equipment is always used at the same place, this can reduce error sources, needs a shorter set up time, and does not occupy as much space on the table. The 19" case can hold up to 8 different or equal automotive links (SENT, CAN, Flexray etc.). The channels can be integrated later on.

• Connectors: Sub-D 9 or custom made, termination switchable (60Ω, 120Ω, open)
• Data rate: up to 1Mbit/s (with max. 20m optical fiber)
• CAN-transceiver: TJA1049 T+118
• CAN-choke: B82789C0513N002, 51uH
• Power supply: 5 NiMH cells with 4 Ah; >30h; five-poled charge plug
• Case dimensions: 136mm x 86mm x 65mm
• Aluminum case with rubber protectors
• Weight: approx. 800g
• Misc.: optional external battery pack / supply available
• external filter depending on application
• 19” rack mount or ST optical fiber connectors available on request