Viewed products
Suitable for Mil-STD 461 and DO-160...
Not available independently - must be...
New
Typically In Stock
Warning: Last items in stock!
Availability date:
Frequency Range | 9 KHz - 30 MHz |
Standards Met | Mil-STD 461,DO-160 |
Gain | See Image Thumbnail |
Application/Test Type | Electric field emission measurements below 30 MHz per Military standards (MIL-STD-461) and FAA (DO-160) specifications |
Antennas Monopole Antennas | |
Parameter | Value |
Antenna Factor (1 Meter) | ±1 dB |
Impedance | 50 Ohms |
Connector | BNC (female) |
Mounting Base | 1/4" 20 thread |
Aperture | - |
Dimensions | Collapsible Element Length: 41 inches (fully extended); Base Plate: 24 x 24 inches (60 x 60 cm) |
Weight | 19 lbs. (8.6 kg) |
The Com-Power AM-741 Active Monopole Antenna, 9 kHz - 60 MHz was designed to measure electric field strength in the frequency range from 9 kHz to 30 MHz. This antenna includes a built-in broadband amplifier covering the frequency range of operation. The built in preamplifier improves the sensitivity of the antenna and also provides a 50 Ω matched output.
The antenna amplifier is enclosed in an aluminum enclosure. The 41 inch collapsible rod element is connected to BNC connector located on the top the amplifier enclosure. The amplifier enclosure is mounted on the bottom of a 60 x 60 cm stainless steel plate. The front panel of the AM-741 Monopole antenna has battery status and saturation indicators. The saturation indicator will illuminate if the if the field measured is saturating the built in preamplifier.
The antenna can be used for 6-8 hours continious with a fully charged battery. An external charger addapter is included with each antenna.
The antenna has 1/4 inch x 20 threaded hole which allows the AM-741 to be mounted on an antenna tripod with matching threads. The manual and certificate of calibration will be shipped with each unit.