Laplace AC1000 Low Distortion Power Supply up to 1kWatt

Th Laplace AC1000 supply is rated at 4.4 amps at 240vac, 50Hz. Often referred to as the AC2000’s “clean mains” unit capable of handling 1kW output. Operation is to simply plug input into dirty mains supply and connect EUT to ‘clean’ O/P socket on the front panel. A switch to the left of this selects either, ‘clean’ or normal mains. Can be utilised whenever a clean mains supply is sought.

The AC1000 achieves its unique price/performance ratio by actively adjusting the incoming mains waveform to produce a clean output. Other suppliers use convertor techniques to completely recreate the output from scratch. Our solution delivers an output which achieves the required THD with the minimum of hardware and expense. It includes the ability to switch the correction in or out so that the original waveform can be observed and measured if required. Overload and thermal protection systems are built-in and produce an audible warning if activated.

• Provides fully compliant power to the EUT for up to 1kW
• Small size and cost effective
• Ideal for Harmonics compliance testing.
• THD output is 0.1% max (as required by the standards).