IFI CW TWT Amplifiers

Viewed products

View larger

IFI T84-200 High Power Traveling Wave Tube Amplifier

Condition New

The EMC Shop

Digital Display Monitors: Collector Current, Collector Voltage, Helix Current, Helix Voltage, Forward RF Power, Reflected RF Power, Filament Hours, Beam Hours
Status Indicators: Power On, Standby, RF On/Operate
Faults: Helix Overcurrent, VSWR Overload, Thermal Overloads, Air Flow, Collector Overcurrent
Controls: Power On/Off, Standby, RF On/Operate, Fault Reset, Local/Remote
Ease of Maintenance
Designed to meet the safety requirements of the IEC-348 and Underwriters Labratory of American Standards
Broadband Coverage
Applications Include: MIL-STD-461/462, RTCA/D0-160, SAE Specifications, Radiated Susceptibility, Bellcore testing, Broadband Communications.
Ruggedized Versions are available for Shipboard and Airborne applications

Specifications
Frequency Range	4 - 8 GHz
Min Power Out	200 Watts
Min Sat Gain	53 dB
Max NF	35 dB
Prime Power	100/115/220/230 or 240VAC ±10% 50/60 Hz, single phase 115/208 or 200/220/230/240VAC ±10% 50/60 Hz, three phase Wye, Delta and/or 400 Hz power is available
Mechanical
Dimensions	14"H x 19"W x 27"D
(Rack Mountable)	(356mm x 483mm x 686mm)
Weight	170 pounds typical (77kg)
Cooling	Internal forced air
Remote Operation
GPIB, RS422, RS485, RS232, or TTL Remote Control
Environmental
Operating Temperature	0 - 50°C (40°C @ 10,000 Feet)
Relative Humidity	95% (non-condensing)
Operating Altitude	10,000 feet maximum
Non-operating Temp.	-20 to 70°C
Non-operating Altitude	50,000 feet maximum
Outline Drawing
Specifications are subject to change without notice.
RF Specifications
Spurious Outputs	-40 dBc, maximum. -50 dBc, available.
Input Impedance	50 Ohms, VSWR 2.0:1
Output Impedance	50 Ohms, VSWR 2.0:1 2.5:1 maximum.
Input Connector	Type N (Female).
Output Connector	1.0 to 8.0 GHz, Type N (Female), 8.0 to 12.0 GHz, WR90 12.0 to 18.0 GHz,WR62 7.5 to 18.0 GHz, WRD750 6.0 to 18.0 GHz, WRD650 (Other waveguides available Option 117)