TPG400A Transformer with Pulse Generator with ICOIL-4 for IEC 61000-4-8, 9, & 10

The TPG400A current transform is for the typical mains frequencies of 50 Hz to 60 Hz. It is used to feed the 1 meter square induction coil (ICOIL-4). This coil setup can reach magnetic field strengths of 1000 A/m for a short time and 360 A/m consistently. It has low inductance and can be used with fast signals or one turn will need more ampere to reach fields expected by IEC 61000-4-8. The square induction coil ICOIL-4 is used with the TPG400A to generate magnetic fields for immunity testing according to IEC 61000-4-8, IEC 61000-4-9 and IEC 61000-4-10.The side length of the ICOIL-4 is 3 feet and comes with screw terminals. The pulse generator that is built into the TPG400A had intervals of .5-5 seconds. Other time intervals can be set by manually holding the start button.

TPG400A Specifications

Power Requirement: 230 V. 50/ 60Hz / 16A
Max current into the Coil: 400 A
Max current (5 min): 600 A
Max current (5 sec): 1200 A
Max filed strength: >1000 A/m
Dimensions (WxDxH): 25.6 x 31 x 19 inches
Weight TPG400A: 132 lbs

ICOIL-4 Specifications 

Inductance: 2.9 μH
Frequency Range: DC- 10 MHz
Magnetic Field Stregenth at 1 coil: 9 A/m
Max continuous current: 400 A
Max current at 10 min: 600 A
Max current at center of coil: 360 a/m
Mounting tube: 86 x 7.6 inches
Weight of ICOIL-4: 9lbs
Standards: IEC 61000-4-8, IEC 61000-4-9, IEC 61000-4-10
Connector type: Male threads M16