> Anechoic Chambers>EMC Absorber>Hybrid Microwave & RF Absorber>RF Pyramidal Absorber>Cuming Microwave C-RAM EVA Pyramidal Absorber

RF Pyramidal Absorber

Quick Links

Information

Viewed products

Cuming Microwave C-RAM EVA Pyramidal Absorber View larger

Cuming Microwave C-RAM EVA Pyramidal Absorber

New

  • Series of very high performance pyramidal absorbers
  • Capable of handling relatively high power densities
  • It is a very open cell
  • Porous material
  • Used in anechoic chambers to cover air ducts
  • Reducing RF reflections
  • Without substantially reducing air flow
  • Made from light

More details

Request Quote

Request Quote/More Info

Test Equipment Description

Cuming Microwave C-RAM EVA Pyramidal Absorber for Medium Power and Ventilation Ducts

The C-RAM EVA is a series of very high performance pyramidal absorbers capable of handling relatively high power densities. It is a very open cell, porous material and is used in anechoic chambers to cover air ducts, thereby reducing RF reflections, without substantially reducing air flow.

C-RAM EVA is made from light, open cell foam with large cell size of 15 pores/inch. The large open cells permit forced air circulation through the material increasing the power handling capabilities to approximately 4 W/in2 of RF power. Without forced air cooling, the material can typically handle 2 to 3 W/in2.

C-RAM EVA is dimensionally equivalent to the corresponding grades of C-RAM SFC. The reflectivity characteristics are identical to those of C-RAM SFC.

C-RAM EVA is a very resilient foam. It stands up well to mechanical abuse and tolerates repeated deformation without tearing.

METHOD OF APPLICATION

Readily installed using a contact adhesive such as CAMBOND 934, just as CRAM SFC would be. For installation over ducts, or where forced cooling air will be blown through the material, the piece should be cut at least one inch larger than the duct on all sides.

The piece is bonded along this edge strip; larger grades may require small patches of Velcro at the center to mate with a Velcro piece attached to the grid work of the duct or it may be strapped to the duct using a cable tie running through the valleys.

A nylon fish line fastened to the wall or ceiling and running through the valleys of the pyramids is also very helpful in securing the vent absorber especially on ceiling installation.

AVAILABILITY 

Available in versions 4, 6, 8, 12, 18, 24, 36, 40 and 48 inches tall, corresponding in performance and geometry to the equivalent grade of C-RAM SFC.

Available in standard base dimensions of 24 in x 24 in (610 x 610 mm). However, custom sizes can be made to accommodate existing air ducts.

TABLE 1
PHYSICAL CHARACTERISTICS AND TYPICAL REFLECTIVITY AT NORMAL INCIDENCE
GRADEHEIGHT
In. (mm)		WEIGHT
lbs. (kg)		TIPS PER
PIECE		REFLECTIVITY AT FREQUENCY (GHz)
0.0800.100.30.51.03.06.0101836*50*
EVA-44.3 (1092.8 (1.2)144     -30-35-42-50-50-50
EVA-66 (152)3.5 (1.6)100       -32-40-45-50-50-50
EVA-88 (203)5 (2.3)64    -30-37-45-50-50-50-50
EVA-1212 (305)7 (3.1)36    -35-40-45-50-50-50-50
EVA-1818 (457)10 (4.5)16   -30-37-40-45-50-50-50>-45
EVA-2424 (610)12 (5.4)9-7 -30-34-40-45-50-50-50-50>-45
EVA-3636 (914)19 (8.6)4-9-15-33-37-42-50-50-50-50-50>-45
EVA-4040 (1016)22 (10)4-11-16-34-38-43-50-50-50-50-50-50
EVA-4848 (1219)27 (12.2)4-14-21-35-39-45-50-50-50-50-50>-45

Notes:
* EVA has been characterized at 36 and 50 GHz, but is not routinely measured at these frequencies.
** EVA larger than 48 in. can be supplied as custom parts.

TABLE 2
TYPICAL REFLECTIVITY (BISTATIC) AT OFF-NORMAL INCIDENCE
(Multiply numbers in chart by dB values in Table 1)
Absorber height
in wavelengths		Off-normal angle (0° = normal, 90° = grazing)
  45°50°55°60°65°70°75°80°
4.01.000.950.860.750.700.600.51 0.43
2.00.900.820.740.660.580.490.420.34
1.00.720.650.580.500.440.370.310.25
0.50.480.430.370.310.250.20----

13 other products in the same category: