No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Used RF Anechoic Chambers
- EMC Test Equipment
- Transient Generators
- RF Power Amplifiers
- DC - 300 kHz RF Amplifiers
- 10 kHz - 250 MHz RF Amplifiers
- 10 kHz - 400 MHz RF Amplifiers
- 10 kHz - 1 GHz RF Amplifiers
- 80 MHz - 1 GHz RF Amplifiers
- 1 GHz - 2 GHz RF Amplifiers
- 700 MHz - 4.2 GHz RF Amplifiers
- 1 GHz - 6 GHz RF Amplifiers
- 2 GHz - 8 GHz RF Amplifiers
- 6 GHz - 18 GHz RF Amplifiers
- 18 GHz - 40 GHz RF Amplifiers
- Pulse Amplifiers
- RF Field Strength Probes & Meters
- RF Conducted Immunity
- EMC Receivers/EMI Analyzers
- EMC Antennas
- Coupling Decoupling Networks (CDN's)
- Line Impedance Stabilization Networks (LISN's)
- RF Test Equipment
- EMC Probes
- EMC Measurement & Equipment Software
- Power Supplies
- Electrical Safety Analyzers
- High Precision Laboratory Power Analyzers & Meters
- Anechoic Chambers
- Over-the-Air (OTA) Test Chambers
- EMI RF Shielded Tent Enclosures
- RF Shielded Rooms
- EMC Absorber
- Positioning Equipment
- EMC/EMI Test Setup
- GTEM Cells / TEM Cells
- Reverberation Chambers
- Used RF Anechoic Chambers
- EMC Chamber Filters
- EMC Chamber Shielding Gaskets
- RF Shielded Doors
- Anechoic Chamber Accessories
- Fully Anechoic (FAR) Test Chambers
- Manufacturers
- 3ctest
- AE Techron
- AH Systems
- Amplifier Research
- Boonton
- Com-Power
- Diamond Engineering
- EM Test (Ametek CTS)
- EMC Partner
- EMC Test Design
- Empower High Power RF Amplifiers
- ETS-lindgren
- Log Periodic Dipole Array Antenna
- Near Field Probe Sets
- Double Ridge Horn Antennas
- Biconical Antennas
- Quad Ridge Horn Antennas
- Electric Field Probes
- GTEM's
- Positioners & Tripods
- Loop Antennas
- Biconilog Antennas
- LISN's (Line Impedance Stabilization Network)
- Shielded Enclosures/Rooms
- Monopole Antennas
- Field Generating Antennas
- Fischer Custom Communications
- Haefely Hipotronics
- Haefely EFT/Burst Immunity Test Systems
- Haefely Surge Combination Wave Test Systems
- Haefely Surge Damped Oscillating Wave Test Systems
- Haefely Electrostatic Discharge Test Systems (ESD)
- Haefely Surge Ring Wave Test Systems
- Haefely Surge Telecom Wave Test Systems
- Haefely Magnetic Field Test Systems
- Haefely CDN's (Coupling/Decoupling Networks)
- IFI Amplifiers
- Keysight (Agilent)
- MVG - Microwave Vision Group
- PMM / Narda
- Rohde & Schwarz RF Test Equipment
- Rohde & Schwarz Broadband RF Amplifiers
- Rohde & Schwarz Spectrum Analyzers
- Rohde & Schwarz Compliant EMI Test Receivers
- Rohde & Schwarz Isotropic RF Probes
- Rohde & Schwarz RF Signal Generators
- Rohde & Schwarz RF Switches
- Rohde & Schwarz Oscilloscopes
- Rohde & Schwarz RF Power Meters
- Rohde & Schwarz RF Power Sensors
- Schloder
- Schwarzbeck Mess-Elektronik
- Schwarzbeck Antennas
- Schwarzbeck Automotive Antennas
- Schwarzbeck Broadband Horn Antennas
- Schwarzbeck Biconical Antennas
- Schwarzbeck Logarithmic Periodic Broadband Antennas
- Schwarzbeck Stacked Log-Periodic Broadband Antennas
- Schwarzbeck Biconic Log-Periodic Antennas
- Schwarzbeck Dipole Antennas
- Schwarzbeck Rod Antennas
- Schwarbeck Antenna Baluns / Holders
- Schwarzbeck LISN Line Impedance Stabilisation Networks
- Schwarbeck Decoupling & Absorbing Clamps
- Schwarzbeck Field Probes
- Schwarzbeck Helmholtz Coils
- Schwarzbeck Antenna Masts
- Schwarzbeck Coupling/Decoupling Networks
- Schwarzbeck Antennas
- Solar Electronics
- Teseq (Schaffner)
- Teseq Automotive Transient Generators
- Teseq RF Test Equipment
- Teseq EFT/Burst Generators
- Teseq RF Immunity Generators
- Teseq ESD Guns
- Teseq Surge Generators
- Teseq Harmonics & Flicker Solutions
- Teseq Dips, Interrupts & Variations Equipment
- Teseq Ring Wave Generators
- Teseq Oscillatory Waves Generators
- Teseq Absorbing Clamps / Ferrite Tube
- Teseq EMC Antennas
- Teseq Current Probes
- Teseq Coupling Networks
- Thermo Keytek
- Vicreate
- Compliance Standards
- International (IEC/EN)
- EN/IEC 61000-3-2
- EN/IEC 61000-3-3
- IEC 61000-3-11
- IEC / EN 610000-3-12
- EN/IEC 61000-4-2
- EN/IEC 61000-4-3
- EN/IEC 61000-4-4
- EN/IEC 61000-4-5
- EN/IEC 61000-4-6
- EN/IEC 61000-4-7
- EN/IEC 61000-4-8
- EN/IEC 61000-4-9
- EN/IEC 61000-4-10
- EN/IEC 61000-4-11
- EN/IEC 61000-4-12
- EN/IEC 61000-4-16
- EN/IEC 61000-4-18
- EN/IEC 61000-4-19
- EN/IEC 61000-4-20
- EN/IEC 61000-4-21
- EN/IEC 61000-4-29
- EN/IEC 61000-4-31
- IEC 61000-4-39
- EN/IEC 62132
- SEMI F47 Voltage Sag Immunity
- Product Standards
- Military & Aerospace Standards
- Automotive EMC Standards
- CISPR Standards
- Telecom Testing
- ANSI/IEEE Standards
- FCC Part 15
- FCC Part 30
- International (IEC/EN)
- Application/Test Type
- Radiated Immunity
- Bulk Current Injection Testing
- RF Emissions Testing
- Conducted Immunity
- Conducted Emissions
- Antenna Pattern Measurement
- CE Mark Testing
- Intentional Radiator Testing
- Pulsed HIRF Radar
- Over-the-Air (OTA) Testing
- 5G Test Solutions
- Automotive EMC
- SAR Measurement Equipment
- Radiated Emissions
- Battery Simulator Test Equipment
- Services
- Clearance
Viewed products
-
APREL WTT-127A Compact...
EUT Chamber Dimension : 127 x 120 x...
APREL WTT-127A Compact Chamber
New
- EUT Chamber Dimension : 127 x 120 x 108 cm
- AP Shield Box Dimension : 60 x 60 x 35 cm
- System integration stand for easy movement (caster system)
- ETF-198 programmable RF attenuators with OTA & conduction port
- WiFi high gain dual band antenna / ultra small size
- EUT turntable (30 cm)
- RS-232 Cable TurnTable Controll
- AC filter (Rate 9A-Max) x2, RJ-45 x3 , RS-232 x1,
- Fan & Air flow x2, SMA Connector x 16 (Total package)
Mobile Shield
- Standard configurations:
W 85cm x H 120cm x L 115cm
W 90cm x H 120cm x L 115cm
W 110cm x H 120cm x L 115cm - Isolation: electrical fields and plane waves 100dB @ 0.3-18GHz
- Electrical push button door
- System integration stand for easy movement (caster system)
- Graphite cone absorbers
- Panel 2mm thick zinc plated steel plate
- Standard interface panel: USB x2, VGA x1, DC Jack x3, RJ45 (including filter) x1, SMA x2
PDF Downloads
Test Equipment Description
Mobile Chamber APREL offers two concepts of compact chambers:
Mobile Shield is an add-on option for use with the standard size EM-ISight automated test system. It is designed to provide isolation from ambient noise sourses that may be detected by the system during a measurement process. Features include an automated door operated by push button, multiple pass through filter options (including HDMI, LAN, K-Type) and sizes.
Wireless Throughput Tester is a small form-factor anechoic chamber designed to test over the air and conducted performance of a WiFi Access Point operating on 802.11a/b/g/n/ac. Shipped fully integrated with a built-in turntable and 2 isolation shield enclosures for Client Access Point (2.5 GHz & 5 GHz), programmable attenuator and required filters. Delivered fully operational the system can be in operation within hours of unpacking.
Both solusions are compact, mobile, and an inexpensive alternative to conventional anechoic chambers.
WTT‐127A Wireless Throughput Tester is a small form‐factor low cost anechoic chamber that comes fully integrated with a built‐in turntable, 2 isolation shield enclosures for Client AP (2.5G & 5GHz), signal interference filters, programmable RF attenuators and an OTA (over the air) conduction port. The solution is shipped ready to test throughput in both Over The Air & Conductive modes with flexibility to perform other wireless performance parametric testing.
The WTT‐127A is a compact and inexpensive alternative to conventional anechoic chambers. It is delivered ready to use and tests throughput vs range simulating realistic use conditions. Software controls the test applications including wireless path loss data throughput. The WTT‐127A assists in the development of WiFi solutions, provides QA engineers with a method of validation and shortens the development cycle through improved test productivity.
MAIN APPLICATIONS
- Wireless Access Point, Wireless Devices (IEEE802.11,a/ac/b/g/n WiFi device)
- WiFi-AP Over the air Throughput testing -2.5GHz, 5GHz and 2.5+5GHz Combined Model
- WiFi-AP Conductive throughput testing -2.5GHz, 5GHz and 2.5+5GHz Combined Model
- Wireless Device Throughput Measurements - 2.5GHz, 5GHz and 2.5+5GHz Combined Model
KEY FEATURES
- 2GHz – 6 GHz Frequency Range (upgrade size of enclosure for lower frequency of 700MHz)
- Capable of Performing: OTA & Conductive Throughput Measurements
- Shield Isolation > 100 dB Typical (EUT test chamber & Client AP shield Box). Total isolation with selected I/O filter connected condition > -65 to -85dB (frequency dependent)
- 80 cm Signal Path Length (Receiving Antenna to EUT antenna standard solution)
- DUT Turntable (Positioner): 0-360 ° 1 ° steps
- User Selectable I/O Ports: Standard equipped solution includes 8 SMA Connectors, 2 LAN (giga port) connectors, RS-232, AC Power filter and Air-flow honey comb vent & Cooling Fan
- Equipped Dual Band Antennas (2.5G & 5GHz) x 4 (supports IEEE802.11,a/ac/b/g/n)
- ETF-198 programmable RF attenuator (box) with OTA & conduction port. Path loss table factors included, Attenuation - Range: 0 to -135db, Attenuation - Resolution: 1db/ step
- Operates with IxChariot throughput measurement Software (customer to source) Client AP (2.5GHz & 5GHz) --(customer to source)
- Compatible with any client AP (allows for easier set up and TCP/IP changes)
- User friendly GUI with test adaptable operation setting to speed up test process, includes automated report output
- Faster test time compared to other similar systems
- System setup performed by installation engineer along with user training within 1 day
- Freestanding mobile cart configuration for easy set up, deployment and portability
- Standard size: 1270mm (W) x 1200mm (L) x 1950mm (H)
 |  |
| WTT-127A SYSTEM SPECIFICATIONS | ||||
| ELECTRICAL SPECIFICATIONS | ||||
| Model | Electrical (VAC) | Frequency (Hz) | Total Current (Max) | Power Plug Type |
| WTT-127A | 100 to 240 VAC | 50/60 Hz | 15 A | NEMA 5-15P plug |
| AC Power line filter | 100 to 240 VAC | 50/60 Hz | 9 A | NEMA 5-16P plug |
| Turn Table (30 cm) | 100 to 240 VAC | 50/60 Hz | 2A | NEMA 5-16P plug |
| PHYSICAL SPECIFICATIONS | ||||
| Length | Width | Height | Weight (nominal) | |
| Test Volume | 0.35 m | 0.35 m | 0.5 m | Turntable Load < 5 kgs |
| Outside Dimensions | 120 cm | 127 cm | 195 cm | 450 kgs |
| EUT Chamber Dimensions | 120 cm | 127 cm | 108 cm | 280 kgs |
| AP Shield Box Dimension | 60 cm | 60 cm | 35 cm | 45 kgs x 2 |
| Turn Table (30 cm) | 30 cm | 30 cm | 20 cm | 10 kgs |
| TECHNICAL SPECIFICATIONS | ||||
| Model | WiFi dual antenna frequency range | Path length | Positioners | Shield performance |
| WTT-127A | 2400 MHz to 2500MHz 5000MHzto 6000MHz | 80 cm | DUT Turntable x 1 0-360° | > 100 dB 400 MHz to 18 GHz Signal Filter isolation > 65db |
| WTT-127A AUTOMATED SYSTEM INTERFACE (I/O) LIST | |||||
| Signal Filter / Interface | |||||
| AC Power filter (100-240V) | RJ-45 Filter (10/100/1000) | RS-232 Filter | Fan & Honey Comb | SMA Connector | |
| EUT Chamber | 1 | 2 | 1 | 1 | 8 |
| AP Shield Box (set/each) | 1 | 1 | 0 | 1 | 4 |
Mobile Shield
The APREL Mobile Shield is an add-on option for use with the EM-ISight automated test system. This mobile shield is designed to allow for easy integration of the EM-Isight system so as to provide isolation from ambient noise sources that would normally be detected by the system. Features an automated door operated by the push of a button.
