EMC Test Equipment Rental, Sales & Service - The EMC Shop

Categories

Popular
Best Sellers

Quick view
EM Test VDS 200N30 Voltage Drop Simulator For ISO 7637 Pulses 2B and 4
- Voltage up to 60 Volts
- Current up to 30 Amps (peak up to 45 Amps)
- Low output impedance
- Powerful DC voltage source
- ISO 7637-2 Pulses 4 and 2b
- ISO 16750-2
- Pre-programmed test routines to simulate various supply waveforms
- Input for external signal generator to produce most complex waveforms
- Software for Windows Vista & Windows 7
- USB and GPIB interfaces
Request Quote
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For EM Test VDS 200N30 Voltage Drop Simulator For ISO 7637 Pulses 2B and 4

EM Test VDS 200N30 Voltage Drop Simulator For ISO 7637 Pulses 2B and 4
Voltage up to 60 Volts
Current up to 30 Amps (peak up to 45 Amps)
Low output impedance
Powerful DC voltage source
ISO 7637-2 Pulses 4 and 2b
ISO 16750-2
Pre-programmed test routines to simulate various supply waveforms
Input for external signal generator to produce most complex waveforms
Software for Windows Vista & Windows 7
USB and GPIB interfaces
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Rent IFI S41-300 0.8 – 4.2 GHz Solid State Microwave Power Amplifier
- 0.8 – 4.2 GHz Frequency Range
- Solid State Design
- Instantaneous Broadband Frequency range
- Modular Design Construction
- Rugged construction & High Reliability
- Integrated Force Air Cooling
- Backlit Screen
- Self-diagnostic circuitry
- IEEE-488 interface & RS232 Remote
To Purchase IFI S41-300
Request Quote
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Rent IFI S41-300 0.8 – 4.2 GHz Solid State Microwave Power Amplifier

Rent IFI S41-300 0.8 – 4.2 GHz Solid State Microwave Power Amplifier
0.8 – 4.2 GHz Frequency Range
Solid State Design
Instantaneous Broadband Frequency range
Modular Design Construction
Rugged construction & High Reliability
Integrated Force Air Cooling
Backlit Screen
Self-diagnostic circuitry
IEEE-488 interface & RS232 Remote
To Purchase IFI S41-300
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Tomco RF Amplifier BT01000-AlphaS .1 MHz - 30MHz
- Rugged, solid-state design - high reliability
- Extremely high phase and amplitude stability
- Very fast pulse rise/fall times
- High linearity
- Very low interpulse noise
Request Quote
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Tomco RF Amplifier BT01000-AlphaS .1 MHz - 30MHz

Tomco RF Amplifier BT01000-AlphaS .1 MHz - 30MHz
Rugged, solid-state design - high reliability
Extremely high phase and amplitude stability
Very fast pulse rise/fall times
High linearity
Very low interpulse noise
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
$895.00 Monthly
Rent Haefely PEFT 4010 Electrical Fast Transient EFT/Burst Generator for IEC 61000-4-4
- Rentals Ship Immediately
- NIST Traceable Calibration Certificate
- Order online now
- Voltage Range: 0.10 to 4.5 kV
- Built in Single Phase Coupler
- Buy Used EFT/Burst Generators
$895.00
Add to cart More
Typically In Stock
Request Quote/More Info
Send Enquiry For Rent Haefely PEFT 4010 Electrical Fast Transient EFT/Burst Generator for IEC 61000-4-4

Rent Haefely PEFT 4010 Electrical Fast Transient EFT/Burst Generator for IEC 61000-4-4
Rentals Ship Immediately
NIST Traceable Calibration Certificate
Order online now
Voltage Range: 0.10 to 4.5 kV
Built in Single Phase Coupler
Buy Used EFT/Burst Generators
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Used Haefely PIM 150 100 kHz & 1 MHz Oscillating Wave Surge Generator
- PSURGE 8000 Mainframe & PIM 150 Module System Meeting:100kHz & 1MHz frequencies
  IEC 61000-4-12 Power & Data lines
  IEC 61000-4-18 Ed.1 D.O.W
  ANSI C37.90.1-2002 Power lines
  IEC 60255-22-1 Measuring relays and protection equipment
  IEEE 1613 Substation Equipment
- Need to Test Now? Rent the Haefely PIM150 System
- Integrated three phase CDN (Single Phase Avail)
Request Quote
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Used Haefely PIM 150 100 kHz & 1 MHz Oscillating Wave Surge Generator

Used Haefely PIM 150 100 kHz & 1 MHz Oscillating Wave Surge Generator
PSURGE 8000 Mainframe & PIM 150 Module System Meeting:100kHz & 1MHz frequencies
IEC 61000-4-12 Power & Data lines
IEC 61000-4-18 Ed.1 D.O.W
ANSI C37.90.1-2002 Power lines
IEC 60255-22-1 Measuring relays and protection equipment
IEEE 1613 Substation Equipment
Need to Test Now? Rent the Haefely PIM150 System
Integrated three phase CDN (Single Phase Avail)
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
TWT18G-250 8 GHz - 18 GHz, 250 Watt RF CW Amplifier
- Frequency Range: 8 ... 18 GHz
- Output Power PN min / typ W: 250 / 300
- Gain min / typ dB: 54 / 62 ±7.5
- Harmonics 2nd / 3rd dBc: 8 / 20
- Line Power VA: 1500
- Dimensions (H, D) 19”-System: 3 HU, 630 mm
- Weight kg: 34
Request Quote
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For TWT18G-250 8 GHz - 18 GHz, 250 Watt RF CW Amplifier

TWT18G-250 8 GHz - 18 GHz, 250 Watt RF CW Amplifier
Frequency Range: 8 ... 18 GHz
Output Power PN min / typ W: 250 / 300
Gain min / typ dB: 54 / 62 ±7.5
Harmonics 2nd / 3rd dBc: 8 / 20
Line Power VA: 1500
Dimensions (H, D) 19”-System: 3 HU, 630 mm
Weight kg: 34
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Teseq INA 6502 Automatic Step Transformer for IEC 61000-4-11
- Integrated function unit to NSG 3000 system
- Power line dips to 0%, 40%, 70% and 80%
- Complies with EN/IEC 61000-4-11
- Includes EUT power control switch
Request Quote
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Teseq INA 6502 Automatic Step Transformer for IEC 61000-4-11

Teseq INA 6502 Automatic Step Transformer for IEC 61000-4-11
Integrated function unit to NSG 3000 system
Power line dips to 0%, 40%, 70% and 80%
Complies with EN/IEC 61000-4-11
Includes EUT power control switch
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Rigol EMI Precompliance Test Equipment Bundle
- Rigol DSA710 100kHz to 1GHz Spectrum Analyzer
  100kHz to 1GHz Frequency Range
  Displayed average noise level (DANL) <-155dBm/Hz typ. with preamplifier on
  Minimum resolution bandwidth (RBW) 100Hz
  Phase noise <-80dBc/Hz @10kHz offset
  Level measurement uncertainty <1.5dB
  8" (800 x 480) high-definition display
  Linear and logarithmic frequency axis
- EMI-DSA800
  For DSA800 Series Models
  EMI Filter & Quasi-Peak Detector Kit
  Option can be added by a software key
- NFP-3
  30MHz to 3GHz Frequency Range
  One set includes four types of probe, provides optimizing sensitivity and resolution
  Minimum resolution: 2mm; able to capture near field radiation of single circuit line
  Applicable for electromagnetic leakage testing inside the cable
- S1210 EMIs
  Introduces the workspace concept - Manage multiple measurements easily
  'Demo' mode included - Trial the software without an instrument and a licence
Request Quote
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Rigol EMI Precompliance Test Equipment Bundle

Rigol EMI Precompliance Test Equipment Bundle
Rigol DSA710 100kHz to 1GHz Spectrum Analyzer
100kHz to 1GHz Frequency Range
Displayed average noise level (DANL) <-155dBm/Hz typ. with preamplifier on
Minimum resolution bandwidth (RBW) 100Hz
Phase noise <-80dBc/Hz @10kHz offset
Level measurement uncertainty <1.5dB
8" (800 x 480) high-definition display
Linear and logarithmic frequency axis
EMI-DSA800
For DSA800 Series Models
EMI Filter & Quasi-Peak Detector Kit
Option can be added by a software key
NFP-3
30MHz to 3GHz Frequency Range
One set includes four types of probe, provides optimizing sensitivity and resolution
Minimum resolution: 2mm; able to capture near field radiation of single circuit line
Applicable for electromagnetic leakage testing inside the cable
S1210 EMIs
Introduces the workspace concept - Manage multiple measurements easily
'Demo' mode included - Trial the software without an instrument and a licence
First Name Last Name Email Phone Subject Message or
Add to Compare

Quick view
FTA1G Ferrite Tile Absorber 30 MHz - 1 GHz
- Typical Performance at:
  30 MHz = -18.0 dB
  100 MHz = -27.0dB
  300 MHz = -25.0 dB
  500 MHz = -19.5 dB
  1000 MHz = -12.5 dB
- Initial permeability: 2000±20%
- Relative Loss: 25 (0.1MHz) tanδ/μiac
- Saturation Flux Density: 260 (1194A/m)
- 3.93" by 3.93" (.0265" thick)
- Minimum Order Requirements Apply
Request Quote
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For FTA1G Ferrite Tile Absorber 30 MHz - 1 GHz

FTA1G Ferrite Tile Absorber 30 MHz - 1 GHz
Typical Performance at:
30 MHz = -18.0 dB
100 MHz = -27.0dB
300 MHz = -25.0 dB
500 MHz = -19.5 dB
1000 MHz = -12.5 dB
Initial permeability: 2000±20%
Relative Loss: 25 (0.1MHz) tanδ/μiac
Saturation Flux Density: 260 (1194A/m)
3.93" by 3.93" (.0265" thick)
Minimum Order Requirements Apply
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view Sale!
RFC Series High Performance, Low Loss RF Cables, DC - 50 GHz
- DC - 50 GHz
- Max Power In:
  200W @ 7 GHz
  100W @ 18 GHz
  50W @ 50 GHz
- Stocked Cables Offered Online (Inquire for other lengths/connectors)
- Shielding Effectiveness -110 dB minimum (cable only)
- Time Delay: 1.21 ns/ft (32.97 ns/m)
- Dielectric Withstand Voltage: 15 kV at 60 Hz
- Capacitance: 24.4 pF/ft (80.1 pF/m)
Request Quote
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For RFC Series High Performance, Low Loss RF Cables, DC - 50 GHz

RFC Series High Performance, Low Loss RF Cables, DC - 50 GHz
DC - 50 GHz
Max Power In:
200W @ 7 GHz
100W @ 18 GHz
50W @ 50 GHz
Stocked Cables Offered Online (Inquire for other lengths/connectors)
Shielding Effectiveness -110 dB minimum (cable only)
Time Delay: 1.21 ns/ft (32.97 ns/m)
Dielectric Withstand Voltage: 15 kV at 60 Hz
Capacitance: 24.4 pF/ft (80.1 pF/m)
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
GRC Series Ground Cable w/ 470k Ohm Resistors for ESD Voltage Bleeding
- Ideal for voltage bleeding to Ground Plane during Indirect ESD Immunity Testing
- Compliant to IEC 61000-4-2, ISO 10605, DO-160, Mil-STD CS118 and more.
- 40kV High Voltage Cable (rated to 150 degrees C)
- Metal Oxide Resistors (1% tolerance)
- 1.5 Meters (5 Feet) in Length
- Made in USA
Request Quote
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For GRC Series Ground Cable w/ 470k Ohm Resistors for ESD Voltage Bleeding

GRC Series Ground Cable w/ 470k Ohm Resistors for ESD Voltage Bleeding
Ideal for voltage bleeding to Ground Plane during Indirect ESD Immunity Testing
Compliant to IEC 61000-4-2, ISO 10605, DO-160, Mil-STD CS118 and more.
40kV High Voltage Cable (rated to 150 degrees C)
Metal Oxide Resistors (1% tolerance)
1.5 Meters (5 Feet) in Length
Made in USA
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Rent Teseq NSG 435 Electrostatic Discharge Simulator for IEC 61000-4-2
- Rentals Ship Immediately
- Suitable for IEC 61000-4-2, MIL 461 CS118, and more
- 2-Day Free Transit
- Auto Invoicing of Rental Rate each Month
- Package Includes:
  Air Discharge Capability: 16.5 kV
  Contact Discharge Capability: 9 kV
  Tripod Mount
  Traceable Calibration Certificate
Request Quote
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Rent Teseq NSG 435 Electrostatic Discharge Simulator for IEC 61000-4-2

Rent Teseq NSG 435 Electrostatic Discharge Simulator for IEC 61000-4-2
Rentals Ship Immediately
Suitable for IEC 61000-4-2, MIL 461 CS118, and more
2-Day Free Transit
Auto Invoicing of Rental Rate each Month
Package Includes:
Air Discharge Capability: 16.5 kV
Contact Discharge Capability: 9 kV
Tripod Mount
Traceable Calibration Certificate
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Com-Power PS-500 RF Near Field Probe Kit, 9 kHz - 5 GHz
- Frequency Range:
  H-Field Loop: 9 kHz - 5 GHz
  E-Field Broadband: 50 kHz - 5 GHz
  E-Field Fine Tip: 100 kHz - 5 GHz
  Contact Tip: 400 Hz - 5 GHz
- Lightweight - Easy to use and handle
- Small Size - Allows easy access to corners
- Sensitive to Tip Position - Ease of pinpointing source
- Immune to Hand Position - For repeatable results
- Optional preamplifier
Request Quote
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Com-Power PS-500 RF Near Field Probe Kit, 9 kHz - 5 GHz

Com-Power PS-500 RF Near Field Probe Kit, 9 kHz - 5 GHz
Frequency Range:
H-Field Loop: 9 kHz - 5 GHz
E-Field Broadband: 50 kHz - 5 GHz
E-Field Fine Tip: 100 kHz - 5 GHz
Contact Tip: 400 Hz - 5 GHz
Lightweight - Easy to use and handle
Small Size - Allows easy access to corners
Sensitive to Tip Position - Ease of pinpointing source
Immune to Hand Position - For repeatable results
Optional preamplifier
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
AH Systems ATU-510 Wood Tripod for Test Antennas
- Rugged Maple wood construction
- Standard 1/4-20 mounting thread
- Reversible legs: Rubber feet for lab use, spike tips for outdoor testing
- lightweight and durable wooden legs
- Rugged Construction
- Folded Height: 40" (101 cm)
- Max Height: 64" (163 cm)
- Weight: 11.3 lbs (5.1 Kg)
Request Quote
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For AH Systems ATU-510 Wood Tripod for Test Antennas

AH Systems ATU-510 Wood Tripod for Test Antennas
Rugged Maple wood construction
Standard 1/4-20 mounting thread
Reversible legs: Rubber feet for lab use, spike tips for outdoor testing
lightweight and durable wooden legs
Rugged Construction
Folded Height: 40" (101 cm)
Max Height: 64" (163 cm)
Weight: 11.3 lbs (5.1 Kg)
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Rent Com-Power CLCE-400 Emissions Probe for CISPR, MIL-STD 461, DO-160
- Frequency Range: 10 kHz to 400 MHz
- Suitable for CISPR, Mil-Std 461 & DO-160
- Optional FCLCE-1000 Calibration Fixture for 50Ω transmission line
- Individual calibration
- Three-year warranty
Purchase Com-Power CLCE-400
Request Quote
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Rent Com-Power CLCE-400 Emissions Probe for CISPR, MIL-STD 461, DO-160

Rent Com-Power CLCE-400 Emissions Probe for CISPR, MIL-STD 461, DO-160
Frequency Range: 10 kHz to 400 MHz
Suitable for CISPR, Mil-Std 461 & DO-160
Optional FCLCE-1000 Calibration Fixture for 50Ω transmission line
Individual calibration
Three-year warranty
Purchase Com-Power CLCE-400
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Fischer (FCC) F-65 RF Current Monitoring Probe, 10 kHz - 1 GHz
- 10 kHz – 1 GHz
- 350 Amps Max - DC-400 Hz
- 3 Amps Max (100A Peack) up to 1 GHz
- dBΩ: 0
Request Quote
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Fischer (FCC) F-65 RF Current Monitoring Probe, 10 kHz - 1 GHz

Fischer (FCC) F-65 RF Current Monitoring Probe, 10 kHz - 1 GHz
10 kHz – 1 GHz
350 Amps Max - DC-400 Hz
3 Amps Max (100A Peack) up to 1 GHz
dBΩ: 0
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Rent 3ctest TIS 700 Automotive Transient Simulator ISO 7637 Pulse 1,2a,3a/b
- Economic Alternative for Automotive EMC Compliance
- Meets ISO 7637 Pulses 1, 2a, 3a and 3b
- Built-in EFT/Burst generator module
- Built-in Micropulse generator module (ISO 7637, JASO, SAE and NISSAN)
Request Quote
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Rent 3ctest TIS 700 Automotive Transient Simulator ISO 7637 Pulse 1,2a,3a/b

Rent 3ctest TIS 700 Automotive Transient Simulator ISO 7637 Pulse 1,2a,3a/b
Economic Alternative for Automotive EMC Compliance
Meets ISO 7637 Pulses 1, 2a, 3a and 3b
Built-in EFT/Burst generator module
Built-in Micropulse generator module (ISO 7637, JASO, SAE and NISSAN)
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
FCC Part 15 Certification Testing
- Class A and Class B, Intentional and Unintentional radiator testing
- Customizable test plans for specific frequencies and sections of FCC Part 15
Request Quote
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For FCC Part 15 Certification Testing

FCC Part 15 Certification Testing
Class A and Class B, Intentional and Unintentional radiator testing
Customizable test plans for specific frequencies and sections of FCC Part 15
First Name Last Name Email Phone Subject Message or
Add to Compare

Immediate Shipment
Calibrated equipment and new RF accessories stocked and ready to ship if order submitted by 3 PM.
Online Ordering
Most EMC test equipment and accessories are available to order today with any major credit card.
Customer Service
Call 844.423.7435 for account setup, application support and formal quotes, or technical information. Mon - Fri 8 AM to 5 PM PST

The EMC Shop

EMC Test Equipment & Accessories

Bringing progressive methods to the industry. The EMC shop saves customers times with online ordering, stock updates and detailed specifications including the all new Compare tool.

New EMC Test Equipment

The EMC Shop is a stocking distributor for most major manufacturers of EMC testing equipment and accessories. Most product statuses are current and up-to-date.

Rentals & Leases

Customers save money for short term projects by renting EMC test equipment. *Online orders are subject to credit approval.