Tomco RF Amplifier BT01000-AlphaS .1 MHz - 30MHz

The BT-AlphaS series is a range of class AB RF power amplifiers covering the 100kHz to 30MHz frequency range.

Tomco RF Amplifier BT01000-AlphaS .1 MHz - 30MHz Specifications

• Type: Class AB MOSFET
• Rated Power: 1000W minimum; PEP for input power of 0dBm
• P1dB: 800W minimum, Minimum output power at P1dB compression
• Gain: 60dB minimum
• Frequency: 0.1MHz-30MHz
• Gain flatness: ±1.5dB maximum (measured at 1/10th rated output power)
• Max. duty cycle: 20%: Maximum GATE duty cycle
• Max. pulse width; 10ms; Maximum GATE pulse width
• Rated power in CW mode: 100W;CW operation is automatically available at output power level less than approx. 10% of full rated power
• Pulse droop: 0.5dB maximum: Measured at max. pulse width at P1dB level
• Risetime: 200ns typical
• Falltime: 100ns typical
• Harmonics
  • Odd: -20dBc typical, -10dBc max.
  • Even: -30dBc typical, -20dBc max.
  • Measured at 1dB below rated output power 
• Spurious:<-70dBc maximum
• Output noise (blanked):<10dB above thermal (100kHz bandwidth)
• Phase change/power: <10˚ from -40dB to full power
• Phase stability:<1˚ across 10ms pulse
• Output sample: -60dB into 50 Ω (forward voltage sample)
• Input/output impedance: 50 Ω nominal
• Load VSWR: Tolerates at least 3:1 @ full rated power without shut down
• Gain control range: 10dB minimum for 0-5V control voltage; Control via parallel interface
• RF Input: 0dBm nominal, 10dBm for no damage