> Compliance Standards>Military & Aerospace Standards>RTCA DO-160
RTCA DO-160

DO-160, Environmental Conditions and Test Procedures for Airborne Equipment is a standard for the environmental testing of avionics hardware. It is published by the Radio Technical Commission for Aeronautics (RTCA).

Common RTCA DO-160 Test Equipment:

Lightning Surge Test Systems

Line Impedance Stabilization Networks (LISN's)

Current Injection Probes

AC Power Sources & more

Get Application Support, Pricing, Lead Time and More: Contact Form

RTCA DO-160 There are 59 products.

Subcategories

  • RTCA DO-160 Section 17

    The EMC Shop stocks RTCA DO-160 Section 17 Test Equipment to simulator voltage spikes from ancillary equipment. The EMC Shop specializes in military and aerospace compliance testing, contact us now for more information.

  • RTCA DO-160 Section 18

    The EMC Shop speciailizes in audio frequency conducted susceptibility testing. Rent, buy or lease RTCA DO-160 Section 18 Test Equipment. 

  • RTCA/DO-160 Section 20

    RTCA D)-160 Section 20 contains methods for RF conducted suscpeptibility (CS) teting and Radio Frequency Susceptibility (RS) testing. The EMC Shop stocks turnkey solutions with software that allows users to automate test procedures, generates reports and identify susceptibilities in their EUT.

    The EMC Shop stocks calibrated equipment and ships immediately. Rent, buy, or lease RTCA DO-160 Section 20 test equipment for radiated and conducted RF susceptibility testing.

    RTCA/DO-160 Section 20 Test Equipment

    RF Power Amplifiers

    EMC Signal Generators with Pulse Modulation

    Directional Couplers

    High Power, Low Loss RF Cables

    Anechoic Chambers

    EMC Antennas

    E-Field Probes

    RF Power Meters and Sensors

  • RTCA DO-160 Section 22

    RTCA DO-160 Section 22 covers the transient current and voltage spike introduced into electronics cables as a result of the magnetic field generated by a large surge of charge traveling through the frame of the aircraft. Sometimes called a lightning transient or lightning induced effect.

    There are multiple test levels depending on the enviroment ranging from Well-protected environment to Severe electromagnetic environments.

    RTCA DO-160 Section 22 Injection Methods:

    Pin Injection – This method is used to directly inject the waveform into connector pins of both cables and printed wiring boards 

    Cable Bundle Induction – This method uses a coupling transformer to inductively couple the waveform onto the cable bundle 

    Ground Injection – This method is often used as an alternate method to inject the waveform onto the ground wire of the unit under test, referenced to the Ground plane that is located on the surface of the test table.

    RTCA DO-160 Section 22 Waveforms:

    WaveformWaveform TypeSpecifications
    W16.4/69Current Wave
    W20.1/6.4Voltage Wave
    W31MHz/10MHzVoltage Wave
    W46.4/69Voltage Wave
    W5A40/120Current Wave
    W5B50/500Current Wave
    W60.25/4 Current Wave

    RTCA DO-160 Section 22 Waveform Power Levels

    There are five Test Power Levels, where Level 1 is the lowest and Level 5 is the highest.

    Level 1

    • Equipment and wiring are installed in a well protected environment

    Level 2

    • Equipment and wiring are in a partially protected environment

    Level 3

    • Equipment and wiring are in a moderate electromagnetic environment

    Level 4 and 5

    • Equipment and wiring are in severe electromagnetic environments

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • RTCA/DO-160 Section 25

    Rent, buy, or lease RTCA/DO-160 Section 25 ESD Generators. The EMC Shop stocks calibrated equipment and ships immediately.

per page
Showing 25 - 36 of 59 items
  • Quick view
    • 10 kHz–400 MHz Frequency Range
    • Bulk Current Injection (BCI) RF Conducted Immunity System
    • 100 Watts nominal

    Complete testing solutions to the following standards:

    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Broadband (instantaneous single band) : 10 kHz – 400 MHz
    • Frequency extension adapter for testing between 4kHz to 10kHz possible with limited power specifications
    • Typical power: 500 W CW
    • Input Power (with respect of core temperature = 80°C) : 150 W - 60 min / 300 W - 30 min / 500 W - 15 min
    • EMC standars covered:
      • DO 160 D
      • Mil STD 461
      • Automotive standards: PSA, Renault, Ford, Daimler Chrysler...
      • ISO 11452-4
      • SAE J1113-4
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Broad High Frequency Response: 10 kHz - 100 MHz
    • Induce RF currents in accordance with MIL-STD 461 susceptibility testing
    • Measures currents on 50 Hz, 60 Hz and 400 Hz power lines
    • Split Type Clamp-on Design
    • Current injection source as well as a sensitive monitoring probe.
    • Insertion Loss: 13 to 33 dB
    • Max Input Power: 100 Watts CS
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range 10 kHz to 400 MHz
    • Includes:
      • Pearson 8700i Current Injection Probe
      • Pearson 8705 Current Monitor
      • Pearson F-3 Calibration Jig
    • MIL-STD-461 CS114, CS115, CS116
    • DO-160 Section 21, rf CE (8705C)
    • AIAA S-121 Radio Frequency CS
    • NASA GSFC EMI Specs CE03, Bulk current emission
    • Automotive Chrysler Radio Frequency CE
    • John Deere Radio Frequency CE
    • BMW Radio Frequency CE
    • IEC / EN 61000-4-6
    • TR-102323 Radio Frequency CS
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • State of the art, reliable solid state broadband RF technology
    • Instantaneous Broadband Output from 26.5 to 40 GHz
    • 30 Watts P1dB AVG
    • Class AB linear GaAsFET Design
    • Ideal for MIL-STD 461, DO-160 and other RI compliance testing
    Request Quote
    Call for Availability
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Integrated signal generator 80 MHz to 6 GHz
    • Integrated RF switch network
    • Integrated 3 freely configurable pulse modulators (1 μs to 200 s) for radar pulse profiles
    • Multiple EUT monitoring options
    • 3.5“ TFT color display
    • Safety interlock function
    • Remote control via USB, RS232 or LAN
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view

    • Power: 6 kVA
    • Voltage: 0 to 150V/0 to 300V
    • Frequency: 15 Hz to 1.2 kHz
    • Phase angle: 0 to 360°
    • Built-in PFC, provides input power factor over 0.98
    • Advanced PWM technology delivers high power density in a compact rack-mountable package
    • Built-in output isolation relays
    • AC+DC output mode
    • Programmable slew rate setting for changing voltage
    • Turn on, turn off phase angle control
    • Optional function for power line disturbance (PLD) simulation capability
    • Comprehensive measurement capability: V, Irms, Ipk, I inrush, P, PF, CF of current etc.
    • Programmable RMS current limit
    • Full protection: OP, OC, OV and OT protection
    • Optional GPIB and RS-232C interface
    • Easy-use software for operation

    Rent Chroma 61704

    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Integrated signal generator 80 MHz to 6 GHz
    • Integrated RF switch network
    • Integrated 3 freely configurable pulse modulators (1 μs to 200 s) for radar pulse profiles
    • Multiple EUT monitoring options
    • 3.5“ TFT color display
    • Safety interlock function
    • Remote control via USB, RS232 or LAN
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Broad High Frequency Response: 5 MHz - 1 GHz
    • Induce RF currents in accordance with MIL-STD 461 susceptibility testing
    • Individually Calibrated (Insertion Loss and Transfer Impedance calibration included)
    • Split Type Clamp-on Design
    • Current injection source as well as a sensitive monitoring probe.
    • Insertion Loss: 5 to 30 dB
    • Max Input Power: 50 Watts
    • Mas Current: 30 Amps
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 10 kHz to 400 MHz Frequency Range
    • Price is for a pair of LI-125A line impedance stabilization networks
    • Frequency range of 10 kHz to 400 MHz
    • Fully compliant with DO-160/ MIL-STD 461
    • “Air-core” inductors to prevent saturation
    • Individual Calibration Included
    • Three-Year Warranty
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • RTCA DO-160 Section 22 Testing
    • For cable bundle test to isolate radio wave interference and provide stable test impedance.
    • AC/DC Power Supply Maximum Voltage 450V 200A.
    • 4 PCS used at the same time for three phase power supply.
    • Used to isolate electric wave interference when used in cable bundle test to provide stable test impedance.
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Wide frequency range 10 kHz - 400 MHz
    • High power handling (up to 1 kW)
    • Ideal for automotive BCI testing e.g. ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 and manufacture‘s requirements
    • Meets IEC/EN 61000-4-6
    • Replacement for CIP 36A & 37A as specified in Defence Standard 59-41
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
Showing 25 - 36 of 59 items