> Compliance Standards>Military & Aerospace Standards>MIL-STD-461
MIL-STD-461

Test equipment for all versions of MIL-STD-461 including Version G released Decemeber 2015.

MIL-STD-461 Emission and Susceptibility Testing Breakdown

Conducted emissions requirements are designated by CE

Radiated emissions requirements are designated by RE

Conducted susceptibility requirements are designated by CS

Radiated susceptibility requirements are designated by RS

Get Application Support, Pricing, Lead Time and More: Contact Form

MIL-STD-461 There are 134 products.

Subcategories

  • Radiated Susceptibility

    MIL-STD-461 Radiated Susceptibility Description:

    The EMC Shop stock a variety of MIL-STD-461 Radiated Susceptibility test equipment for Magnetic Field, Electric Field, and Transient Electromagnetic Field applications.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • Conducted Susceptibility

    The EMC can provide test eqipment for subcategories of MIL-STD-461; Conducted Susceptibility with applications for:

    Power Leads, Antenna Port, Intermodulation, Rejection of Undesired Signals, Cross-Modulation, Structure Current, Bulk Cable Injection, Impulse Excitation, Damped Sinusoidal Transients, Cables and Power Leads, Lightning Induced Transients, and Personnel Borne Electrostatic Discharge

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • Radiated Emissions

    The EMC Shop stocks and delivers a wide array MIL-STD-461 Radiated Emissions equipment. Applications include: Magnetic Field, Electric Field,Antenna Spurious and Harmonic Outputs.

  • Conducted Emissions

    MIL-STD-461 conducted emission testing equipments for power leads, antenna terminals and more. The EMC Shop carries a variety of testing equipment for all MIL-STD-461 compliance tests.

    The conducted emissions testing for MIL-STD-461 is similar to DO-160 Conducted Emissions testing.

    CE101 Applicability

    MIL-STD-461 CE101 requirement is applicable for power leads, including returns, that obtain power from other sources not part of the EUT.

    For AC applications, this requirement is applicable starting at the second harmonic of the EUT power frequency.

    CE101 Test Procedure

    This test procedure is used to verify that electromagnetic emissions from the EUT do not exceed the specified requirements for power input leads including returns. 5.4.3.2 Test equipment. The test equipment shall be as follows:

    a. Measurement receivers

    b. Current probes

    c. Signal generator

    d. Data recording device

    e. Oscilloscope

    f. Resistor (R)

    g. LISNs

per page
Showing 37 - 48 of 134 items
  • Quick view
    • Meets specifications of IEC 61000-4-6
    • Handles 100 Watts CW
    • Designed for commercial, medical, military and other RF conducted immunity standards
    • Low insertion loss
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Easy polarization adjustment of EMC antenna
    • Leveling bubble
    • Nylon construction
    • Standard 1/4-20 mounting threads
    • 4" mounting surface
    • Weight: 0.7 lbs (317g)
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rugged Maple wood construction
    • Standard 1/4-20 mounting thread
    • Reversible legs: Rubber feet for lab use, spike tips for outdoor testing
    • lightweight and durable wooden legs
    • Rugged Construction
    • Folded Height: 40" (101 cm)
    • Max Height: 64" (163 cm)
    • Weight: 11.3 lbs (5.1 Kg)
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rentals ship immediately
    • 1 Hz - 26.5 GHz
    • Real-Time Analysis up to 40 MHz
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461G EMI receiver requirements
    • Purchase a Used Keysight N9038A EMI Receiver here.
    Request Quote
    Call for Availability
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range of 100Hz - 60MHz
    • Individually Calibrated (Calibration included per ARP-958)
    • FCC, MIL-STD, VDE and TEMPEST Testing
    • High Sensitivity
    • Battery Pack and Charger
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 20 Hz - 2 MHz
    • Built for MIL-STD-461 RE 101 Testing
    • Loop Diameter: 5¼ in. (13.3 cm)
    • 10 Ohms of DC Resistance
    • Turns: 36 (7-41 Litz)
    • BNC Connector
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rentals ship immediately
    • 85 MHz Bandwidth Analysis Option (Fastest Testing Possible)
    • Real-Time Analysis up to 85 MHz BW
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
    • Purchase a Used Keysight N9038 EMI Analyzer here.
    Request Quote
    Call for Availability
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Test equipment bundle with software for easy testing
    • Semi-automatic calibration routine significantly reduces labor-intensive tasks for MIL 461 CS101 Testing
    • Ships Same Day
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Primary Less than 5 ohms
    • Secondary 1⁄4 the primary impedance
    • Frequency response 30 Hz to 250 kHz
    • Audio power 200 W
    • Secondary saturation 50 A, AC or DC max.
    • Turns ratio 2-to-1
    Request Quote
    Typical Lead Time 2 - 4 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 30 Hz to 50 MHz Frequency Range
    • Individually Calibrated 
    • MIL-STD 461G Compliant 
    • 30 Hours of Continuous Operation in a Single Charge
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Fully compliant to MIL-STD 461
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rugged Maple wood construction
    • Standard 1/4-20 mounting thread
    • Reversible legs: Rubber feet for lab use, spike tips for outdoor testing
    • lightweight and durable wooden legs
    • Rugged Construction
    • Folded Height: 40" (101 cm)
    • Max Height: 64" (163 cm)
    • Weight: 11.3 lbs (5.1 Kg)
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
Showing 37 - 48 of 134 items