> Compliance Standards>Military & Aerospace Standards>MIL-STD-461
MIL-STD-461

Test equipment for all versions of MIL-STD-461 including Version G released Decemeber 2015.

MIL-STD-461 Emission and Susceptibility Testing Breakdown

Conducted emissions requirements are designated by CE

Radiated emissions requirements are designated by RE

Conducted susceptibility requirements are designated by CS

Radiated susceptibility requirements are designated by RS

Get Application Support, Pricing, Lead Time and More: Contact Form

MIL-STD-461 There are 134 products.

Subcategories

  • Radiated Susceptibility

    MIL-STD-461 Radiated Susceptibility Description:

    The EMC Shop stock a variety of MIL-STD-461 Radiated Susceptibility test equipment for Magnetic Field, Electric Field, and Transient Electromagnetic Field applications.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • Conducted Susceptibility

    The EMC can provide test eqipment for subcategories of MIL-STD-461; Conducted Susceptibility with applications for:

    Power Leads, Antenna Port, Intermodulation, Rejection of Undesired Signals, Cross-Modulation, Structure Current, Bulk Cable Injection, Impulse Excitation, Damped Sinusoidal Transients, Cables and Power Leads, Lightning Induced Transients, and Personnel Borne Electrostatic Discharge

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • Radiated Emissions

    The EMC Shop stocks and delivers a wide array MIL-STD-461 Radiated Emissions equipment. Applications include: Magnetic Field, Electric Field,Antenna Spurious and Harmonic Outputs.

  • Conducted Emissions

    MIL-STD-461 conducted emission testing equipments for power leads, antenna terminals and more. The EMC Shop carries a variety of testing equipment for all MIL-STD-461 compliance tests.

    The conducted emissions testing for MIL-STD-461 is similar to DO-160 Conducted Emissions testing.

    CE101 Applicability

    MIL-STD-461 CE101 requirement is applicable for power leads, including returns, that obtain power from other sources not part of the EUT.

    For AC applications, this requirement is applicable starting at the second harmonic of the EUT power frequency.

    CE101 Test Procedure

    This test procedure is used to verify that electromagnetic emissions from the EUT do not exceed the specified requirements for power input leads including returns. 5.4.3.2 Test equipment. The test equipment shall be as follows:

    a. Measurement receivers

    b. Current probes

    c. Signal generator

    d. Data recording device

    e. Oscilloscope

    f. Resistor (R)

    g. LISNs

per page
Showing 49 - 60 of 134 items
  • Quick view
    • Suitable for Radiated Immunity Applications (as well as Emissions)
    • Input Power (CW): 1000 Watts
    • Gain: 6.7 dBi
    • 3 Year Warranty
    • Calibration includes 3m Antenna Factors, Gain & VSWR (Additional Measurements Available Upon Request)
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view Sale!
    • Broadband: 200 MHz to 2 GHz
    • Transmit and receive capabilities
    • Individual calibration
    • Three year warranty
    • 800 Watts of CW Power Handling
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range: 80 MHz - 4000 MHz
    • Maximum Continuous Power: 1000 Watts
    • Impedance: 50 Ohms
    • Typical VSWR: 1.7:1 
    • Max Radiated Field: 200 V/m
    • Connector: N-Type female
    • Individually Calibrated (1, 3 and 10 Meter calibration included, horizontal polarization)
    • FCC, MIL-STD, VDE and TEMPEST Testing
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • In accordance with MIL-STD-461E/F, Method CS116
    • Capable of limited testing for RTCA DO-160D, Section 22
    • Panel-mounted digital voltmeter monitors the adjusted open circuit discharge voltage
    • Pulse rates up to one pulse per second maximum (factory adjusted)
    • Single pulse feature enables controlled isolation of transient effects

    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Meets RTCA/DO 160 Section 22 Levels 1-5
    • Pre-Programmged Test Procedures
    • Intelligent Mains Controlled by Program, Stable Charging w/ High Effeciency
    • Auto Safety Protection Program
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 10 kHz - 250 MHz Frequency Range
    • 75 Watt Integrated Amplifier
    • Achieve 40 Vrms with a BCI probe
    • Computer Based System (USB controlled)
    • Self Calibration with Injection Probe
    • RF generator, amplifier and RF Voltmeter usable as independent instruments
    • Connections: EUT "Fail", EUT monitoring by external multimeter
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $995.00 Monthly
    • Suitable for MIL-STD-462 CS06 Testing
    • Waveshapes according to MIL-STD-461B/C, NEMA TS 2-2003, Version 02.06 sections 2.1.6.1 and 2.1.7
    • Rentals ship immediately (Contact us to schedule)
    • Includes isolation transformer for parallel and series injection

    To Purchase Solar 8282-1

    $995.00
    Add to cart
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Rent Solar 8282-1
    • Waveshapes per MIL-STD-461B/C, NEMA TS 2-2003, Version 02.06 sections 2.1.6.1 and 2.1.7
    • Provides outputs up to 600 volts peak amplitude for the 0.15, 5.0 and 10.0 S spikes into a five ohm resistive load (low source impedance).
    • The single pulse feature enables controlled isolation of transient effects.
    • Transients can be injected in synchronism with repetitive circuit functions as required by Method CS06 of MIL-STD-462.
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range: 700 MHz - 18 GHz
    • Antenna Factor: 22 to 44 dB/m
    • Gain: 1.4 to 15 dBi
    • Maximum Continuous Power: 300 Watts
    • Impedance: 50 Ohms
    • Max Radiated Field: 200 V/m
    • Connector: N-Type, female
    • Receive and Transmit
    • Individually Calibrated (1, 3 & 10 Meter calibration included, horizontal polarization)
    • Linearly Polarized
    • FCC, MIL-STD, VDE and TEMPEST Testing
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $14,012.50 $14,750.00 -5% Used
    • ISO 17025 Calibration from Keysight
    • 25 MHz Bandwidth
    • -170 dBm DANL at 1 GHz
    • Max Dynamic Range 3rd order @ 1 GHz: 112 dB
    • Standard Attenuator Range; 60 dB (10 dB Steps)
    • Measure the smallest signals in the presence of large ones with best-in-class level accuracy, DANL & TOI
    • Perform power measurements quickly at discrete frequency points with list-sweep mode
    • Simplify testing with X-Series measurement apps: phase noise, noise figure, analog demodulation, wireless communications & more
    $14,012.50 $14,750.00 -5%
    Add to cart
    Reduced price!
    1 Unit
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Easily adjust and redirect EMC antenna
    • Leveling bubble
    • Nylon construction
    • Standard 1/4-20 mounting threads
    • 4" mounting surface
    • Weight: 0.7 lbs (317g)
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range of 9 KHz to 40 MHz
    • Up to 1,000 Watts Continuos Power
    • Pattern Type: Omni-directional
    • Individually Calibrated (Individual calibration included)
    • FCC, MIL-STD, VDE and TEMPEST Testing
    • Three Year Warranty
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
Showing 49 - 60 of 134 items