3ctest Oscillatory Wave Simulators

Quick Links

Information

Viewed products

3ctest PAWG 100...
Meet the tests as per ISO16750...

View larger

3ctest PAWG 100 Arbitrary Signal Generator

Condition New

Meet the tests as per ISO16750 (corresponding individual manufacturer standard)
Every oscillation channel has waveform arithmetic circuitry to output waveform with high resolution and accuracy
By software control with Ethernet, represent kinds of variation phenomenon easily and really.
Ensure the synchronization deviation among channels to be less than 1μs
Waveform data (CSV) received from oscilloscope can be output with high accuracy.

Application

Automotive

The EMC Shop

More details

Request Quote

Request Quote/More Info

Send to a friend
Send to a friend
3ctest PAWG 100 Arbitrary Signal Generator
Meet the tests as per ISO16750 (corresponding individual manufacturer standard)
Every oscillation channel has waveform arithmetic circuitry to output waveform with high resolution and accuracy
By software control with Ethernet, represent kinds of variation phenomenon easily and really.
Ensure the synchronization deviation among channels to be less than 1μs
Waveform data (CSV) received from oscilloscope can be output with high accuracy.
Application
Automotive
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

PDF Downloads

Data Sheet

PDF Downloads (687.81k)

Test Equipment Description

The test waveforms in automotive become more and more complicated, and more attention are paid to vehicle or components. Normal waveform generator can’t meet these requirements, especially, multiple waveforms superposition during one test is needed, PAWG 100 arbitrary signal generator is the best solution.

Multiple sequence oscillator

Signal output part is cordwood components, can be extended to max. 4 channels.
Can generate arbitrary waveforms: DC wave, ramps, sine, sweep frequency, exponential, frequency modulation/amplitude modulation sine wave, irregular and random arbitrary wave.
Can generate variation waveform with voltage and time axis
Can generate waveform timing sequence

Software for generating arbitrary waveform

Using excellent GUI arbitrary waveform generation software, it can easily generate complex waveforms with repeated voltage, time scanning.

As per

BMW-(Airbag ECU)
BMW 600 13.0(Part 1)
Case New Holland ENS0310
Cummins 14269(982022-026)
BMW GS 95003-2
FAW Diesel ECU MY06.0(Rew.7)
BMW GS 95024-2-1(2010-01)
Chrysler CS-11809(2009)
DaimlerChrysler DC-10614
Many automobile manufacturers test standards
Ford ES-XW7T-1A278-AB
Audi(Reference vehicles)
Fiat 9.90110
Ford EMC-CS-2009.1

Technical Parameters

Number of Channels

1ch～4ch, 2 or 4 optional

Synchronization accuracy among channels

The synchronization time among each channel can be adjusted with unit 0.1μs, adjusting range: 0.1μs~100μs. The synchronization accuracy among channels can be kept to be less than 1μs at output terminal.

Waveform type

DC wave, ramps, triangle wave, sine, square wave, sweep frequency, exponential, frequency modulation/amplitude modulation, Oscilloscope storage data waveform, user’s self-defined waveform, irregular and random arbitrary wave

Parameters

Amplitude, duration, frequency, DC offset, rectification, duty cycle, phase angle, trigger, noise

Amplitude and offset ramping

Static, linear, exponential

Frequency ramping

Static, linear, exponential, log(base 10)

Start/End phase angle

0 ～ 360°in 1°step

Rectification

None, positive, negative, bridge rectification, programmable

Frequency range per channel

Operate mode: 500kHz max. sine, square, triangle wave, etc, which include sweep frequency, amplitude, offset, phase angle and synchronization change among channels.

Direct internal storage mode: DC-500kHz arbitrary wave, 1MHz square wave

Waveform output rate

25MSPS per channel

Frequency resolution

0.001Hz

Rise/fall time

≤100ns @20Vpp

Waveform voltage amplitude

0～±10.00V

Drive capacity

≥ 1 kΩ

Short circuit

Yes

File type

CSV, EXCEL, TXT

File waveform points

16MB Max

Waveform data storage

Dynamic cache data storage: 1GB DDR3 NVDS: 32GB NAND FLASH

Segments of waveform

1000 segments per waveform, each segment is composed of several kinds of waveforms

Segment duration

100µs to 999hrs or infinite loop

Delay between segments

None

Test duration

1ms~9999hrs, 1 to 99999 count, or infinite loop

Trigger oscilloscope output

A BNC socket 0-5V, setting trigger point at the arbitrary point of waveform generation software, monitoring the generated waveform by oscilloscope external trigger function

External control input

One BNC socket 0-5V input, used for 1~4ch waveform external control

PC interface

Ethernet

Operating temperature range

15°C-35°C

Operating humidity range

45%-75%

Driving power supply

AC 90V-260V 50/60Hz 100VA

Dimension

19’/4u

Weight

Approx.10kg

For the future of modern testing equipment

Protection

Voltage setting resolution

1mV

Output accuracy

± (0.2% + 10mV)	DC – 10 kHz
±1%	10 – 100 kHz
± 2%	100 – 350 kHz
± 5%	350 – 500 kHz

AutoLab software

By self-developed AutoLab software, users can edit kinds of waveforms for waveform segment or test points. According to different requirement, users can regulate the waveform by advanced image tools, and recording waveforms by other way is also supported like oscilloscope capturing. All types of waveforms can be downloaded to PAWG 100. PAWG 100, APS and APG series must be matched together.