> Manufacturers>Solar Electronics

Solar Electronics

Quick Links

Information

Solar Electronics

Solar Electronics is a USA based manufacturer of military and aerospace EMI and EMC test equipment for product compliance to test standards such as MIL-STD-461 and RTCA/DO-160. The EMC Shop stocks Solar EMI/EMC test equipment to support immediate testing needs.

Solar Electronics There are 24 products.

Subcategories

  • Solar LISN's

    The EMC Shop is an ISO 17025 accredited company. Contact us for pricing and availability on Solar LISN's (Line Impedance Stabilization Networks).

  • Solar RF Current Probes

    The EMC Shop is an ISO 17025 accredited company. Rent, buy or lease Solar RF Current Probes and ship today.

  • Solar Current Injection Probes

    The EMC Shop is an ISO 17025 accredited company. Stocking EMI test equipment used for Confducted and Radiated Testing. Rent or buy Solar Current Injection Probes today, ship immediately.

  • Solar EMC Generators

    The EMC Shop stocks EMI tents and all test equipment used for conducted susceptibility Testing. Rent or buy Solar EMC Generators and ship immediately.

per page
Showing 13 - 24 of 24 items
  • Quick view
    • 115 V to 230 V Power Line Voltages
    • Equipped with a male connector on the 115 V winding
    • Female connector on the 230 V winding
    • Connectors are the international style IEC-320/CEE 22
    • Mating plugs not supplied
    • Rated at 800 W, 50-60 Hz

    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Audio Isolation Transformer
    • For conducted audio frequency susceptibility testing
    • Provides a convenient bench model unit with three-way binding posts on primary and output voltmeter leads. Standard 0.75" spacing of binding posts allows use of standard plugs. High current secondary uses 1/4-20 threaded studs.
    • Capable of handling the audio power required by EMI specifications and up to 50 A of AC or DC through the secondary in series with the test sample.
    • May be used as a pickup device or an isolating inductor in other tests.
    • Suitable for fastening to the bench top in permanent test setups.
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • for Test Method RE101 of MIL-STD-461F
    • Required by Test Method RE01 in Parts 2 through 6 of MIL-STD- 461C and
    • RE101 of MIL-STD-461D/E/F
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • High insulation resistance over a wide temperature range
    • Excellent stability with long life
    • Built-in discharge resistor for safety
    • Designed for bulkhead or bench mounting
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view

    Provides a convenient bench model unit with three-way binding posts on primary and output voltmeter leads. Standard 0.75" spacing of binding posts allows use of standard plugs. High current secondary uses 1/4-20 threaded studs.

    Request Quote
    Typical Lead Time 2 - 4 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency range 2 MHz to 500 MHz
    • Maximum input power 200 watts (see note)
    • Maximum input current 50 Amperes
    • Maximum time at full power 30 minutes

    Request Quote
    Typical Lead Time 4 - 6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • RS01 magnetic field tests
    • described in Figure 1A of MIL-STD-461A
    • ten turns of number 16 AWG
    • 4.72" (12 cm) in diameter
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Compliant to FCC Part 15, CISPR 16-1, ANSI C63.4 (1992)
    • Rentals Ship Immediately
    • Price is Monthly Rental Rate
    • 50 Amp Capability per line
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency range: 1 kHz - 200 MHz
    • Transfer impedance (ZT): .001
    • Continuous signal current (CW): 50 A

    Request Quote
    Typical Lead Time 4 - 6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Provides output levels from 10 V to more than 400 V into 5 Ω
    • Adjustable pulse position on AC lines relates the transient susceptibility to real
    • time aspects of digital systems
    • Single pulse feature for controlled isolation of transient effects
    • Output terminals for series and parallel injection
    • Standard rack panel construction: 19" wide x 7" high x 12.75" deep
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency range: 10 kHz to 500 MHz
    • Transfer impedance (ZT): 1.0 to 5.0 Ω above 300 kHz
    • Output load impedance: 50 + j 0 Ω
    • Continuous signal current (CW): 40 A
    • Maximum power current: 200 A DC to 400 Hz
    Request Quote
    Typical Lead Time 4 - 6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Modular design 
    • Single rack portability 
    • Programmable single stroke, multiple stroke, multiple burst waveforms 
    • Pin injection, cable bundle injection, ground injection up to Level 3 
    • Self-contained microprocessor control 
    • LCD system display
    • lightning induced transient susceptibility testing
    • requirements of RTCA/DO-160E/F/G Section 22 are met at Levels 1 through 3
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
Showing 13 - 24 of 24 items