BiConiLogs

Quick Links

Information

Viewed products

Teseq CBL 6143A Compact X-Wing® BiLog® Antenna 30 MHz to 3 GHz View larger

Teseq CBL 6143A Compact X-Wing BiLog Antenna 30 MHz to 3 GHz

New

  • Immunity testing to 300 watts
  • Excellent symmetry ±1 dB (typically better than ±0.5 dB)
  • Improved high frequency gain
  • No rotational offsets

More details

Request Quote/More Info

Specifications

Frequency Range30 MHz to 3 GHz
Standards MetIEC/EN 61000-4-3, CISPR 13, CISPR 14-1, CISPR 16-1-4, CISPR 16-2-3, CISPR 22, CISPR 24, CISPR 32, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, IEC 60533, IEC 60601-1-2, IEC 61326, ISO 11452-2,
Gain6 dB (200 MHz to 3 GHz) / 8 dB (700 MHz to 2.5 GHz)
Application/Test TypeRF EMC immunity testing, Improved high frequency gain
Impedance50 Ω
Antennas
Bilogical Antennas
ParameterValue
Antenna Factor (1 Meter)7 to 33 dB/m
Maximum Continuous Power300 Watts
Impedance50 Ohm
ConnectorN type female
Dimensions(L x H x W in mm): approx. 1525 X 980 X 410
VSWR2:1 Average
Weightapprox. 4.2 kg

Test Equipment Description

The Compact X-Wing® BiLog® for RF EMC immunity testing
The combination of BiLog® technology with novel low frequency, folded elements (X-Wings®) allows low frequency power to be efficiently projected forward without significantly affecting the high frequency performance and, at the same time, reduces the chamber coupling effects. The Teseq CBL 6143A has a unique matching network which will allow powers of up to 300 watts CW to be transmitted, making it suitable for most immunity measurements requiring fields of 10 V/m, or even greater.

Emission testing
The innovative geometry of the log periodic section of the Teseq CBL 6143A has been created using advanced modelling techniques of the University of York. This shape optimizes the gain performance over conventional log periodic antennas at frequencies above 700 MHz and extends the useful operating range to 3 GHz. This improvement is invaluable in measurement systems using receiving instruments with high noise floors at high frequencies, saving preamplification which is not always desirable or practical when measuring high level signals or broadband impulsive noise.

Features & Specifications of Teseq CBL 6143A:

  • Frequency range: 30 MHz to 3 GHz (useable to 20 MHz)
  • Typical gain: 6 dB (200 MHz to 3 GHz) / 8 dB (700 MHz to 2.5 GHz)
  • Impedance (nominal): 50 Ω
  • Maximum continuous power: 300 W
  • Connector: N type female
  • VSWR: Average 2:1 max
  • Size antenna (L x H x W in mm): approx. 1525 X 980 X 410 (see drawing)
  • Weight: approx. 4.2 kg
  • Recommended tripod: BTP 6020A

Associated EMC Test Equipment

20 other products in the same category: