CE Mark Testing

Quick Links

Information

Viewed products

Complete IEC/EN Test...
VCS 500M10 10kV Combination Wave...

Complete IEC/EN Rack for CE Marking and Conducted Immunity Certification

View larger

Complete IEC/EN Test Rack for CE Marking and Conducted Immunity Certification

Condition New

VCS 500M10 10kV Combination Wave Surge Simulator
- Standalone tester fo 1.2/50us - 8/20us pulse according to IEC/EN 61000-4-5
- Suitable for UL 1449 Surge testing
TSS 500M10 Telecom Surge Generator
- 10 / 700us pulse according to IEC/EN 61000-4-5
- Test voltage up to 10kV
- Compliant with ITU-T standard for enhanced test level
- Complies with FCC part 68 (Surge B pulses)
CWS 500 Continuous Wave Simulator
- RF Conducted Simulator 150kHz to 230 MHz per IEC/EN 61000-4-6
- Built-in dual directional coupler
- Automatic calibration via built-in power meter
EFT 500 Electrical Fast Transient Generator
- 10,000 Pulses/sec.
- 4.8kV Burst Generator per IEC/EN 61000-4-4
PFS 500 Voltage Dips and Drop Interruptions
- Power Fail Simulator according to IEC/EN 61000-4-11

The EMC Shop

More details

Request Quote

Request Quote/More Info

Send to a friend
Send to a friend
Complete IEC/EN Test Rack for CE Marking and Conducted Immunity Certification
VCS 500M10 10kV Combination Wave Surge Simulator
Standalone tester fo 1.2/50us - 8/20us pulse according to IEC/EN 61000-4-5
Suitable for UL 1449 Surge testing
TSS 500M10 Telecom Surge Generator
10 / 700us pulse according to IEC/EN 61000-4-5
Test voltage up to 10kV
Compliant with ITU-T standard for enhanced test level
Complies with FCC part 68 (Surge B pulses)
CWS 500 Continuous Wave Simulator
RF Conducted Simulator 150kHz to 230 MHz per IEC/EN 61000-4-6
Built-in dual directional coupler
Automatic calibration via built-in power meter
EFT 500 Electrical Fast Transient Generator
10,000 Pulses/sec.
4.8kV Burst Generator per IEC/EN 61000-4-4
PFS 500 Voltage Dips and Drop Interruptions
Power Fail Simulator according to IEC/EN 61000-4-11
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

Test Equipment Description

Complete IEC/EN Test Rack for CE Marking and Conducted Immunity Certification and More offers product sets for your EMC precompliance measurements, which include all necessary instruments to analyze typical EMC problems. Depending on your requirements, you can choose.

IEC/EN Test Rack for CE Marking Includes:

VCS 500M10 10kV Combination Wave Surge Simulator
- Standalone tester fo 1.2/50us - 8/20us pulse according to IEC/EN 61000-4-5
- Suitable for UL 1449 Surge testing
TSS 500M10 Telecom Surge Generator
- 10 / 700us pulse according to IEC/EN 61000-4-5
- Test voltage up to 10kV
- Compliant with ITU-T standard for enhanced test level
- Complies with FCC part 68 (Surge B pulses)
CWS 500 Continuous Wave Simulator
- RF Conducted Simulator 150kHz to 230 MHz per IEC/EN 61000-4-6
- Built-in dual directional coupler
- Automatic calibration via built-in power meter
EFT 500 Electrical Fast Transient Generator
- 10,000 Pulses/sec.
- 4.8kV Burst Generator per IEC/EN 61000-4-4
PFS 500 Voltage Dips and Drop Interruptions
- Power Fail Simulator according to IEC/EN 61000-4-11

Not only do unexpected results in test labs during EMC compliance measurements translate into extra costs, quite often they also cause a substantial delay for your project. Rohde & Schwarz offers effective and cost- efficient tools for EMC precompliance measurements which allow you to successfully prevent possible surprises before the actual onset of a problem.

Set includes

TSS 500M10 Telecom Surge Generator
	Standalone tester for 10 / 700us pulse according to IEC 61000-4-5 Test voltage up to 10kV Compliant with ITU-T standard for enhanced test level Complies with FCC part 68 (Surge B pulses) Integrated CDNs for 2-wire and 4-wire applications Manual operation Standard test procedures RS232 and GPIB interfaces
CWS 500 Continuous Wave Simulator
	Test procedure acc. IEC 61000-4-6 Ed. 4 Built-in amplifier saturation and linearity check Built-in amplifier, 10 kHz to 400 MHz Built-in power meter, 9 kHz to 1 GHz Built-in dual directional coupler Automatic calibration via built-in power meter Connection for external amplifiers up to 1 GHz USB-Interface Software for Windows 7, Windows 8
PFS 200N Series Voltage Dips and Drop interruptions
	Standalone test generator for voltage dips and interruptions Rise/fall time <1us Electronic short-circuit protection Rated voltage 80V DC Front panel operation Standard Test routines USB and GPIB interfaces
EFT 500N5 / N8 Series EFT/burst generator pulse 5/50ns EFT 500N5 EFT 500N5.1 / .2 / .3 / .4 / .5 / .6/ .7/ .8 EFT 500N8 EFT 500N8.1 / .2
	10,000 Pulses/sec. 4.8kV Burst Voltage Spike Frequency up to 1MHz Built-in 1ph or 3ph coupler up to 50A Pulse Verification acc. to Ed.3 on each coupling path
CNI 503 / CNI 501 Coupling Decoupling Network
	Combined coupler for EFT/Burst and Surge testing Surge as per ANSI/IEEE C62.41 (models CNI 501Bx only, other couplers on request) LEDs indicate active mode and coupling Automatic selection of Surge impedance Fully remote controlled by EM TEST generators Meet requirements up to 1,000V DC