Bertan 230-20R High Voltage Power Supply 0-20kV

Spellman’s Bertan brand of 230 Series high voltage power supplies provide regulated high voltage outputs from 1 to 30kV. The low noise, linear topology employed results in extremely low output ripple specifications. These 12 to 15W units are inherently reversible by design, providing either positive or negative output polarity. The 230 Series is fully arc and short circuit protected. Excellent regulation specifications are featured along with outstanding stability performance.

Input Voltage: 115Vac, ±10%, 50/60Hz @ 0.5A 230Vac, ±10%, 50/60Hz @ 0.25A Input voltage is switch selectable

Output Voltage: 0 to 20kV

Output Polarity: All units are reversible polarity by design

Output Current: 0 to 0.5mA 

Voltage Regulation: Line: ±0.002% of rated output voltage over specified input voltage range Load:±0.005% of rated output voltage for a full load change

Current Regulation: Internally set to limit at less than 125% of rated current. A rear panel switch allows limiting at 25% of rated full current

Ripple: 2V