Diamond Engineering DAMS D6050-NORF Multi Axis Positioner

Diamond Engineering D6050-XX Series Multi Axis Positioner

The D6050 series positioners is a precision multi-axis positioner confi gurable up to 50 GHz and 5 Axis of movement.

Complete System
Includes Positioner, Software, 2x 10” Precision RF Cables, tools, documentation, AUT mounting hardware and 3 year warranty. Optional accessories such as pre-confi gured PC and Calibrated reference antenna available.

3D Measurements
2 Axis positioning enables spherical 3D, Effi ciency, and TRP/TIS Measurements. in addition to full principal cuts.

High Resolution
Standard full step resolutions of .02º - Theta and .025º - Phi.

Precision RF Components
Positioner features high quality RF components and precicion rotary joint for lownoise rotation of reference antenna.

All DAMS D6050 Series systems features:

• Robust Components
• Professionally machined parts
• Precision calibrated RF cables
• Precision rotary joints
• Feature-packed software
• Detailed, full-color users manual
• Full technical support
• Parts and labor warranty

Diamond Engineering D6050-XX Series Multi Axis Positioner Specifications
	DAMS D6050-6	DAMS D6050-18	DAMS D6050-40	DAMS D6050-50	D6050-mmW-CFX
Frequency Ranges	DC to 6 GHz	DC to 18 GHz	DC to 40 GHzz	DC-50 GHzz	mmW Waveguide
Cable Interface	Ultra high-quality cable with SMA connectors Ultra-precision, low-noise rotary joint with SMA connectors ("K" connectors on DAMS D6040)
Platform Movement	Horizontal 1.8º precision stepper motor with worm gear drive Up to .02º Turntable (Elevation) resolution Up to .025º Roll (Azimuth) resolution 360º azimuth range ± 180º elevation range
Platform Control Interface	USB 1.1 (RS232 available upon request)
Analyzer Control Interface	GPIB controller card (not included)
Platform Max Speed	120º per minute (vertical) 30 R.P.M. maximum azimuth
Platform Max Speed	Velbon tripod with fluid pan head Horizontal or vertical, standard 1/4-20 tripod threads
Positioner Composition	85% acrylic and Delrin® construction for limited reflection
Environmental Conditions	Operating temp: 0° C to 45° C (32° F to 104° F) No condensation Transport temp: -40° C to 60° C (-40° F to 140° F) 10% to 90% relative humidity No condensation within 72 hours
Power Requirements	+24 vDC (3.0A) center pin + on connector
Positioner Dimensions	12 inches (30.5 cm) wide 5 inches (12.5 cm) tall WITHOUT vertical movement assembly 14 inches (35.6 cm) tall WITH vertical movement assembly
Width	12" (30.5 cm) without tripod
Height	5" (12.5 cm) without vertical movement assembly or tripod 35" (88.9 cm) minimum or 70" maximum (177.8 cm) with vertical movement assembly and tripod
Tripod Composition	Aluminum and plastic
Turntable
Resolution	0.02º - Full Step Mode
Drivetrain	Precision worm gear table with 1.8 deg. stepper motor
Gear Ratio	90:1
Movement Range	0-360º or +/- 180 , re-indexable hardware limits
Position Feedback	None- Open loop, position maintained by software
Weight (positioner only)	72 Lbs. with slide rails Positioner Max Speed: 4 R.P.M. / 24º/Sec. (light load)
AUT Mounting Options	24” Diameter x .75” Acrylic plate 1/4-20 Hole Array (M6 Holes Available upon request)
Weight Capacity	100 Lbs. (45.5 kg)
Rotary Joint	Precision, low noise rotary joint. (SMA, 2.92mm, or 2.4mm)
Roll / Phi Axis
Frequency Ranges	DC to 6, 18, 40, 50 GHz
Resolution	0.025º - Full Step Mode
Drivetrain	Precision worm gear drive with 1.8 deg. stepper motor
Gear Ratio	72:1
Movement Range	360º Continuous or +/- 180º
Positioner Max Speed	4 R.P.M. / 24º/Sec. (light load)
Position Feedback	None- Open loop, position maintained by software
Weight (positioner only)	Lbs.
AUT Mounting Options	10” Diameter x .5” Acrylic plate 10-32 Hole Array (M5 Holes Available upon request)
Weight Capacity	10 lbs. maximum @ level position
Rotary Joint	Precision, low noise rotary joint. (SMA, 2.92mm, or 2.4mm)
Electrical and Communications (2 Axis Systems)
Controller type	Internal 2 axis microprocessor based controller
Resolution	Full step / half step
Motor Current	2.0A per motor phase
Cooling	24v Fan
Communication Interface	9 Pin D-sub RS-232 (includes USB-RS232 Adapter) Communication cable length: 3 Meters (Included)
Input Voltage	24VDC 5A - 2.5mm DC Barrel connector
Power Supply (included)	24VDC 5A - 110/220v input
Model Features
	D6050 Series
Frequency Range	Up to 50GHz Coax and 110 GHz Waveguide
> Movement Range	Azimuth: 360º or +/- 180 Elevation: or +/- 180
Resolution	Azimuth: .02º (.01 half-step) Elevation: .02º (.01 half-step)
Weight Capacity	Roll Axis: 25 Lbs. Turntable: 150 Lbs
Included Cables	Two 15' ULTRA-Low-loss SMA Cables
Rotary Joint	Precision rotary joints in both axis
Included Software	DAMS Antenna Measurement Studio Pro
Spherical Plotting Module	Included
Included Accessories	All Accessories
Warranty	Full 3 year Warranty