EMC Antenna Masts & Stands

Quick Links

Information

Viewed products

Maturo EAS 1.5-10kg...
1.5 m Antenna height fixed...

View larger

Maturo EAS 1.5-10kg Electric Antenna Stand

Condition New

1.5 m Antenna height fixed
Specifically designed for measurements in electromagnetic absorption chambers;
At a fixed measuring height
With the exception of the drive unit
Is fabricated from plastic (PVC and reinforced fibreglass)
Metal parts are located only in the base plate
Drive mechanism (max. 0.3 m above ground level)

The EMC Shop

More details

Request Quote

Request Quote/More Info

Send to a friend
Send to a friend
Maturo EAS 1.5-10kg Electric Antenna Stand
1.5 m Antenna height fixed
Specifically designed for measurements in electromagnetic absorption chambers;
At a fixed measuring height
With the exception of the drive unit
Is fabricated from plastic (PVC and reinforced fibreglass)
Metal parts are located only in the base plate
Drive mechanism (max. 0.3 m above ground level)
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

PDF Downloads

Data Sheet

PDF Downloads (66.51k)

Test Equipment Description

The Electric Antenna Stand EAS 1.5-10kg is specifically designed for measurements in electromagnetic absorption chambers at a fixed measuring height. Other fixed antenna heights are available upon request.

The antenna mast, with the exception of the drive unit, is fabricated from plastic (PVC and reinforced fibreglass). Metal parts are located only in the base plate and the drive mechanism (max. 0.3 m above ground level).

Antenna Adapters for all commercially available antennas are available upon request. All antennas during polarisation rotate around their axis to eliminate any elevation errors.

The IEEE 488.2 (GPIB) bus provides an additional control option for all functions, when operated with the SCU/MCU or NCD Controller.

Technical Data
Antenna height fixed	1.5 m
Total mast height	1.7 m
Load capability	max. 10 kg (when balanced)
For long and heavy antennas a counter weight is required to balancing the load Depending on the distance of the antenna centre of gravity
Material	Plastic + reinforced fibreglass
Mast cross-section	100 mm x 100 mm
Base L x W	0.9 m x 0.75 m
Moveable with 4 casters
Electrical Polarisation	0°/90° (vert./hor.)
Positioning time 0°/90°	approx. 3 sec.
Motor	Brushless DC motor 200 W
Interference suppression	20 dB under limits EN 55022 class B
Current consumption	max. 2A
Voltage	208-230 VAC, 50/60 Hz, single phase
Discharge current	25mA per drive unit (higher in the moment when powering on)
Control cable	Fibre optic lines
Remote control via	IEEE interface
Antenna support drive	Toothed belt
Material of toothed belts	Kevlar reinforced (non-metallic)
Temperature range	+10 °C...+35 °C
Total weight	approx. 35 kg
Accessories	Interface to SCU/MCU/NCD Controller 1.5 m power supply cable Service manual