EMC Antenna Masts & Stands

Quick Links

Information

Viewed products

Maturo FPP 2.3/1.5...
Designed for remote-controlled...

Maturo FPP 2.3/1.5 Field Probe Positionierer

View larger

Maturo FPP 2.3/1.5 Field Probe Positioner

Condition New

Designed for remote-controlled measurements at defined vertical areas.
System allows automatic measurements of the field homogeneity according to EN 61000-4-3 and IEC 61000-4-3.
Limit switches and the general mechanical design ensures reliable system operation.
With the exception of the drive unit
Fabricated from plastic (PVC and reinforced fibreglass)
Metal parts are located only in the base plate
Drive mechanism (max. 0.3 m above ground level)

The EMC Shop

More details

Request Quote

Request Quote/More Info

Send to a friend
Send to a friend
Maturo FPP 2.3/1.5 Field Probe Positioner
Designed for remote-controlled measurements at defined vertical areas.
System allows automatic measurements of the field homogeneity according to EN 61000-4-3 and IEC 61000-4-3.
Limit switches and the general mechanical design ensures reliable system operation.
With the exception of the drive unit
Fabricated from plastic (PVC and reinforced fibreglass)
Metal parts are located only in the base plate
Drive mechanism (max. 0.3 m above ground level)
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

PDF Downloads

Data Sheet

PDF Downloads (90.09k)

Test Equipment Description

The Biaxial Field Probe Positioner FPP 2.3/1.5 is specifically designed for remote-controlled measurements at defined vertical areas. The system allows automatic measurements of the field homogeneity according to EN61000-4-3 and IEC 61000-4-3.

Limit switches and the general mechanical design ensures reliable system operation.

The FPP 2.3/1.5, with the exception of the drive unit, is fabricated from plastic (PVC and reinforced fibreglass). Metal parts are located only in the base plate and the drive mechanism (max. 0.3 m above ground level).

The IEEE 488.2 (GPIB) bus provides an additional control option for all functions, when operated with the MCU or NCD Controller.

Technical Data
Field Probe height adjustment from	0.8 – 2.3 m
Overall height	2.7 m
Horizontal range	1.5 m
Overall length	2.3 m
Load Capability	3 kg
Material	Plastics (PVC and reinforced fibreglass)
Cross-section carrier tubes	60 mm x 60 mm
Rail width	650 mm
Positioning speed adjustable between	2.0 – 12.0 cm/s
Positioning accuracy	+/- 1 cm
Motors	Brushless DC motors 200 W
Interference suppression	20 dB under limits EN 55022 class B
Current consumption	max. 2A
Voltage	208-230 VAC, 50/60 Hz, single phase
Discharge current	25mA per drive unit (higher in the moment when powering on)
Control cable	Fibre optic lines
Remote control via	IEEE interface
Antenna support drive	2 toothed belts
Material of toothed belts	Kevlar reinforced (non-metallic)
Temperature range	+10 °C...+35 °C
Total weight	approx. 40 kg
Accessories	Interface to MCU/NCD Controller 1.5 m power supply cable 5m & 10m Fibre optic cable Service manual