Viewed products
EN 13763-13 - Determination of...
New
Warning: Last items in stock!
Availability date:
The test generator SESD 2910 was developed especially „for Proof Immunity to Disturbance of Electro explosive Devices (EED) toward Pulses of Electrostatic Discharge“.
The SESD 2910 simulates electrostatic discharge as defined in the EN 13763-13, March 2004 and the military standard (draft version) VG 95378-11, May 1997. The generator can be used to test electrical detonators in automotive application – for example Airbag.
Schematic diagram SESD 2910
Schloder SESD 2910 Technical Data | ||||||
Output voltage | 1 kV to 30 kV | |||||
Polarity of the output voltage | Positive und negative | |||||
Test Mode | Air and contact discharge | |||||
Polarity Changing | Automatically | |||||
Capacity module | see options >module> | |||||
Resistor module | see options >module> | |||||
Repetition frequency of the discharge pulses | 1 / 5 / 10 / 30 sec. at contact / relay discharge | |||||
Pre-selectable counter | 1 – 9990 | |||||
Safety circuit | Output for safety switch and warning lamps red /green. The high voltage is discharged internal within 50 ms, in case the safety circuit is interrupt. | |||||
Main | 230 VAC, 50 Hz, 3A 110 VAC, 60 Hz on demand | |||||
Dimension | ||||||
Width | 34,2 cm | |||||
High | 26,5 cm | |||||
Depth | 38,0 cm (without grip) | |||||
Weight | app. 20 kg |