MFG-1000 Magnetic Field Generator & Ripple Current Tester

The MFG-1000 is a compact test system for broadband generation and measurement of magnetic fields. Its internal components allow automatic EMC tests according to automotive standards where high field strength need to be generated or measured.

In combination with our triaxial Helmholtz coils full automated susceptibility tests are possible at magnetic field strength up to 1000 A/m for frequencies from DC to 1 kHz. Lower field strength can be generated for frequencies up to 250 kHz. Due to the triaxial set-up of our Helmholtz coil major improvement in device handling is achieved because there is no need to turn an EUT during tests.

The MFG-1000 complies to all magnetic field requirements of relevant EMC and military standards. Tests and measurements are controlled by a program which will set most parameter automatically. For any relevant standard, which are fulfilled by the MFG-1000 , limit values are already included into the software package, although any different value can be defined by a user. After every test full reports will be created automatically. Report layout is pre-defined, though any user-defined layout is possible.

Preprogrammed Test Standards

• ISO 11452-8
• MIL-STD-461E/F
• IEC/EN 55103-2
• IEC/EN 61000-4-8
• SAE J1113-2
• SAE J1113-22
• Ford ES-XW7T-1A278-AC
• GM W3097
• PSA B21 7110
• Renault 36-00-808
• DC-11224
• DC 10614

With additional hardware:

• MILSTD-461E/F (CE101, CS101, CS109)
• EN 61000-4-16
• EC/EN 61543
• DO-160 Section 19