MIL-STD-461 RS103 Power Amplifiers

Quick Links

Information

Viewed products

Amplifier Research 250W1000B 80MHz - 1000MHz, 250 Watts CW RF Amplifier View larger

Amplifier Research 250W1000B 80MHz - 1000MHz, 250 Watts CW RF Amplifier

New

  • 80MHz–1000MHz
  • 250 Watts CW
  • RF Amplifier
  • Equipped with a Digital Control Panel (DCP)
  • Provides readily available RF power
  • For typical applications
  • 2 Year Warranty

More details

Request Quote/More Info

PDF Downloads

Test Equipment Description

The Amplifier Research 250W1000B is a portable, selfcontained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 250W1000B, when used with a sweep generator, will provide a minimum of 250 watts of RF power.

The Model 250W1000B is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a color LCD touch screen and a single rotary knob to offer status reporting and control capability. The display provides operational presentation of Forward Power and Reflected Power plus amplifier status. Special features include a gain control, internal automatic level control (ALC) with front panel control of the ALC threshold, forward and reflective RF sample ports for precise power measurements and RF output level protection. Protection is provided by DC current level sensing of all output stages.

All amplifier control functions and status indications are available remotely in GPIB/IEEE488 and RS-232 hardwire and fiber optic, USB and Ethernet. The buss interface connector is located on the back panel and positive control of local or remote operation is assured by a keylock on the front panel of the amplifier.

Housed in a stylish, contemporary bench top enclosure, the Model 250W1000B provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, and as a driver for frequency multipliers and higher power amplifiers. A safety interlock can be implemented via a rear panel connector.

The export classification for this equipment is EAR99. These commodities, technology or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

Specifications
RATED POWER OUTPUT250 watts
INPUT FOR RATED OUPUT1.0 mW Max
POWER OUTPUT @ 3dB COMPRESSIONNominal: 300 watts, Minimum: 250 watts
POWER OUPUT @ 1dB COMPRESSIONNominal: 250 watts, Minimum: 200 watts
FLATNESS±1.5 dB maximum, ±1.0 dB typical
FREQUENCY RESPONSE80-1000 MHz instantaneously
GAIN54 dB minimum
GAIN ADJUSTMENT
(continuous range)
25 dB minimum (4096 steps remote)
INPUT IMPEDANCE50 ohms, VSWR 1.5:1 maximum; 1.3:1 typical
OUTPUT IMPEDANCE50 ohms, nominal
MISMATCH TOLERANCE100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
MODULATION CAPABILITYFaithfully reproduces AM, FM, or Pulse modulation appearing on input signal.
HARMONIC DISTORTIONMinus 20 dBc maximum at 200 watts, -20dBc typical @ 250 watts
THIRD ORDER INTERCEPT POINT62 dBm typical
NOISE FIGURE8 dB maximum, 6 dB typical
PRIMARY POWER (user must specify)120-240 VAC, 50/60Hz, single phase, 1000 watts maximum
CONNECTORS
RF InputType N female, front
RF OutputType N female, front
Forward SampleBNC female, front (-46 dBc)
Reverse SampleBNC female, front (-46 dBc)
Remote Interfaces
IEEE-48824 pin female
RS-2329 pin Subminiature D (female)
Fiber OpticST Conn Tx and Rx RS-232
USB 2.0Type B
EthernetRJ-45
SAFETY INTERLOCK15 pin Subminiature D
COOLINGForced air (self contained fans)
EXPORT CLASSIFICATIONEAR99

29 other products in the same category: