Multifunction Transient Generators

Quick Links

Information

Viewed products

Haefely PSURGE 8000...
PIM #X modules cover the most common...

View larger

Haefely PSURGE 8000 EMC Surge Platform with Expandable PIM Modules

Condition Used

PIM #X modules cover the most common surge standards, such as EN, ETSI, IEC, Telcordia (Bellcore),FCC (TIA) 68, UL, ITU, ANSI, IEEE & more
Any customized waveform can be easily realized and integrated in a new or existing PSURGE 8000 system
Various coupling / decoupling net - works for power lines 1-phase and 3-phase up to 690 V / 100 A are available

The EMC Shop

More details

Typically In Stock

Request Quote

Request Quote/More Info

Send to a friend
Send to a friend
Haefely PSURGE 8000 EMC Surge Platform with Expandable PIM Modules
PIM #X modules cover the most common surge standards, such as EN, ETSI, IEC, Telcordia (Bellcore),FCC (TIA) 68, UL, ITU, ANSI, IEEE & more
Any customized waveform can be easily realized and integrated in a new or existing PSURGE 8000 system
Various coupling / decoupling net - works for power lines 1-phase and 3-phase up to 690 V / 100 A are available
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

PDF Downloads

PSURGE 8000 Data Sheet

PDF Downloads (692.63k)

Test Equipment Description

Haefely PSURGE 8000 EMC Surge Platform Description:

The PSURGE 8000 test system meets all your current and future surge testing requirements! A modular expandable system that grows with your application needs. The modular concept is built around a PC based host controller (the PSURGE 8000 controller) with physically and functionally independent modules for impulses (PIM #X) and coupling/decoupling (PCD #X). The system uses distributed intelligence and each module has its own application-specific program, runs internal routines and communicates with the host controller. System modules are automatically detected by the host controller, providing true plug & play functionality.

Whether you test according to the IEC 61000 series “CE mark” standards, the IEC 60601 medical device standards, or any number of telecom and product specific standards, the surge platform is your one stop test station for everything from pre-compliance to full-compliance to product development testing. A wide range of cost-efficient coupling / decoupling networks for symmetrical and asymmetrical data and signal lines are available optionally.

Haefely PSURGE 8000 Expandable Modules:

Module	Standards Met	Specifications
PIM 100 Combination wave impulse module	IEC/EN 61000-4-5 Ed. 1 & 2 ANSI C62.41/45	1.2/50 μs open circuit up to 7.4 kV 8/20 μs short circuit up to 3.7 kA Impulse voltage and current monitors ± 1° phase synchronization Reliable semiconductor HV-switch Positive, negative and alternating polarity Up to 12 pulses per minute
PIM 110 Ring wave impulse module	IEC/EN 61000-4-12 ANSI C62.41/45	100 kHz frequency, 0.5 μs rise time Imp. voltage up to 7.8 kV / 12Ω, 30Ω and 200Ω Impulse voltage and current monitors ±1° phase synchronization Positive, negative and alternating polarity Up to 12 pulses per minute Reliable semiconductor HV-switch
PIM 120 Telecom wave impulse module	IEC/EN 61000-4-5 Ed. 1 & 2 ITU K-series and IEC 60950	10/700 μs open circuit voltage 5/320 μs short circuit current Imp. voltage up to 7.4 kV / 15Ω and 40Ω Impulse voltage & current monitors Reliable semiconductor HV-switch Positive, negative and alternating polarity Up to 12 pulses per minute
PCD 120 Four-wire coupling unit for telecom wave	IEC 61000-4-5 (10/700μs impulse only) ITU K.20 / K.21 / K.44 / K.45	4 wire coupling unit for unshielded symmetrical operated lines Compliant with IEC 61000-4-5 (10/700 μs impulse only), ITU K.20 / K.21 / K.44 / K.45 Fully automated operation
PIM 150 Oscillating wave impulse module	IEC/EN 61000-4-12 Ed.1 IEC 61000-4-18 Ed.1, IEC 60255-22-1 ANSI C37.90	100 kHz and 1 MHz burst frequencies 75 ns rise time Impulse voltage up to 3.3 kV / 200Ω Integrated, fully automatic CDN for three-phase AC and DC power lines EUT mains voltage up to 480 V / 277 V 16 A Impulse voltage monitor Capacitive coupling clamp available optionally (IP 4 A) Data line CDN available optionally (PCD 150)
PCD 100 Single-phase CDN for combination wave and ring wave	IEC/EN 61000-4-5 Edition 1 & 2 ANSI C62.41/45 TIA-968A (FCC part 68/47 CFR) Telcordia (Bellcore) GR 1089 CORE	Fully automated test routines Coupling of up to two different wave-shapes without any rewiring For combination wave, ring wave and others (PIM 100, PIM 110) Up to 8 kV impulse voltage EUT mains up to 264 V / 16 A
PCD 130 Three-phase CDN for combination wave and ring wave	IEC/EN 61000-4-5 Edition 1 & 2 ANSI C62.41/45 TIA-968A (FCC part 68/47 CFR) Telcordia(Bellcore) GR 1089 CORE	Fully automated test routines Coupling of up to three different wave- shapes without any rewiring For combination wave, ring wave and others Up to 8 kV impulse voltage EUT mains voltage up to 690 V / 400 V EUT mains current up to 32 A per phase Correct phase angle synchronization for each coupling path

Haefely Psurge 8000 Benefits:

Hardware concept – We are using the latest technology; ultra fast high power semiconductor switches for the highest waveform integrity. High quality HV connectors with integrated safety circuit. Plug & play philosophy. Turn on the sys tem and after the auto scan is finished, your newly connected module will be ready to use. Single connect solution – No reconfiguration during testing, no reconnection errors. Reduces test time and operator interventions. Safety – A fully integrated hardware safety circuit links EVERY high voltage connector and cable. Safety features like external emergency stop or warning lamp protect the user from hazardous and dangerous situations. Test reporting – The WinFEAT’R software automatically documents test parameters and results. Reliable and economical – World renowned HAEFELY quality, reliability, service and support in a flexible and modular surge system.