> Application/Test Type>Radiated Immunity>Radiated Immunity Test Systems>Teseq NSG 4070C-110 Test System For Conducted and Radiated Immunity

Radiated Immunity Test Systems

Quick Links

Information

Viewed products

Teseq NSG 4070C-110 Test System For Conducted and Radiated Immunity View larger

Teseq NSG 4070C-110 Test System For Conducted and Radiated Immunity

New

  • IEC/EN 61000-4-6
  • 110W, 10kHz - 400MHz amplifier
  • 4kHz - 1 GHz signal generator
  • Multiple monitoring options
  • 5.7" TFT color display
  • Remote control software & report generator
  • Optically decoupled remote control
  • Whisper remote

More details

Request Quote

Request Quote/More Info

PDF Downloads

GTEM Application Note

PDF Downloads (264.32k)

SL 50 Application Note

PDF Downloads (690.77k)

NSG 4070C Data Sheet

PDF Downloads (1.71M)

Test Equipment Description

The Teseq NSG 4070C-110 Test System for Conducted and Radiated Immunity is a 110W, 10kHz - 400MHz / 4kHz - 1GHz immunity testing device with a built in RF signal generator and power meter. Teseq NSG4070C models specialize in accompanying both conformity and development testing in compliance with IEC / EN 61000-4-6 and other automotive BCI standards like Namur. A modular setup allows for a versatility in application, and use of either internal or external amplifiers, with power amplifier modules varying in energy and frequency depending on the use. Data transfer is achieved by inserting a simple USB stick into the front panel.

RF
Frequency range4 kHz – 1 GHz
Resolution1 Hz
Reference frequency10 MHz
RF Level
Level range-60 dBm to +10 dBm
Resolution0.1 dB
Amplitude modulation
Modulation depth0 – 100%
Modulation frequency range1 Hz – 50 kHz
Frequency resolution1 Hz
Pulse modulation
Rise / fall time (10% / 90%)< 1 μs
Modulation frequency range0.1 Hz – 1 MHz
Frequency resolution0.01 Hz
Duty cycle0.1% to 100%
External modulation
Delay time< 1 μs / 180°
Periodmin. 20 μs
Pulse widthmin. 10 μs
Power Meter
Frequency range4 kHz to 1 GHz
Linear measurement range
channel 1-35 dBm to +27 dBm (NSG 4070C-60:-40 dBm to +27 dBm)
channel 2,3-45 dBm to +20 dBm
Max. input/no damageNoise level>5 dB below the measurement range
channel 1-3+28 dBm
Input return loss>20 dB (below 500 MHz), >17 dB (500 MHz to 1 GHz)
ConnectorBNC socket, 50 Ω
Accuracy 10 to 30°C
Power Amplifier
Nominal output power45 Watts
Frequency range9 kHz to 1 GHz
Input impedance50 Ω
Output impedance50 Ω
Input return lossmin. 10 dB
Output return lossnominal min. 9.5 dB, 0 dB without damage
Gainmin. 50 dB
Gain flatnessmax. +/- 3 dB
Saturated output power< 400 MHz 46.5 dBm
> 400 MHz 45.4 dBm
Linear output power Max. input power without damage max. +10 dBm< 400 MHz 45.4 dBm
> 400 MHz 43 dBm
Harmonic distortion at linear output powertyp. < -20 dBc

11 other products in the same category: