Viewed products
10kHz - 6 GHz Multi-Tone RF Radiated...
New
Warning: Last items in stock!
Availability date:
The Amplifier Research MT06002 (Multistar™ Multi-tone tester) is a state-of-the-art system designed to test RF Radiated and Conducted immunity faster than ever before possible. By testing multiple frequencies (tones) at once, test times can be reduced by a factor equivalent to the number of tones selected. The number of tones is only limited by the signal generator bandwidth (1000MHz) and the size of the amplifier used with the system.
The MT06002 contains all the instruments needed to perform radiated and conducted immunity testing for various immunity standards except the required amplifiers, antennas and directional couplers. Amplifiers can be sized and selected based on your required field levels and testing needs. Up to 4 RF amplifiers and directional couplers can be controlled and monitored and power can be delivered to up to 4 antennas to generate the desired fields.
The system contains a vector signal transceiver, an RF field probe and monitor, an RF switch matrix, and automated radiated immunity test software. Everything is contained in a single housing, which eliminates setup issues. The software includes automated routines to calibrate the field and maximize the speed of the test, by generating the most tones possible, while still meeting the Linearity and Harmonics requirements of the specification.
In the event of a EUT failure, margin investigation (thresholding) and traditional single tone testing can be performed causing a slowing of the test only in the areas of concern. This system has the versatility needed for every test laboratory and equipment manufacturer while adding the benefit of reduced test times and greater throughput.
The export classification for this equipment is EAR99. These commodities, technology or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
Radiated Immunity
Conducted Immunity
Specifications | |
Vector Signal Transceiver (Generator) Specifications | |
Frequency range | 10 kHz to 6.0 GHz |
Power Out (Ave) | +10 dBm |
Reverse Power (Max) | +24 dBm (CW,RMS) |
Modulation | AM, FM, Pulse, Phase |
Instantaneous Bandwidth | Up to 1 GHz |
Hardware Platform | PXIe |
Vector Signal Transceiver (Analyzer) Specifications | |
Frequency Range | 10 kHz to 6.0 GHz |
Input Power (Max | ) +24 dBm |
Instantaneous Bandwidth | 200 MHz |
Hardware Platform | PXIe |
Field Monitor/Probe Specifications | |
Channels | 4 |
Probe | 1 |
Type | Isotropic, Laser powered |
Frequency | 100kHz-6GHz |
Range | 0.5–800 V/m |
Connections | |
RF signal input | 4- Type N Male (rear) For optional signal generators |
RF Signal Out | 4- Type N Male (rear) to RF amplifiers |
High power RF in | 4- Type N Male (rear) from RF amplifiers |
High power RF out | 4- Type N male (rear) to antennas/loads |
Fwd Power In | 4- Type N Male (rear) For forward power |
Rev Power In | 4- Type N Male (rear) For reverse power |
Monitor Power In | 1- Type N Male (rear) For monitoring test level |
Serial Port | 2– USB ports |
Ethernet Port | 1– RJ45 (rear) |
GPIB (IEEE-488) Port | 1– 24-pin female (rear) |
Embedded Controller | |
Computer | Intel Core i5 4400E processor |
Operating system | Windows 7 |
I/O | 6 USB Ports, Ethernet |
RAM | 8GB DDR3L |
Hard Drive | 250 GB |
Hardware Platform | PXIe |
General | |
Power | 115/230 VAC 50/60 Hz, single phase 16A |
Breaker | 2 pole, 20A |
Cooling | active cooling, air ventilation |
Environmental conditions | 10°C - 40°C |
Dimensions, | 50.3 x 47.2 x 61 cm 19.8 x 18.6 x 24 in |
Weight | 22.7 kg (50.0 lb) |
Export Classification | EAR99 |
Options | |
1 | 3 FL7006/Kit Electric Field Probes (See NOTE) full vehicle |
2 | 1 FL7030 Electric Field Probe for testing below 100kHz |
NOTE: Option 1 used with standard ISO11451-2 auto |