RF Amplifiers 1 MHz - 1 GHz

Quick Links

Information

Viewed products

Amplifier Research 1000W1000F RF Amplifier 80MHz - 1000MHz, 1000 Watts CW View larger

Amplifier Research 1000W1000F RF Amplifier 80MHz - 1000MHz, 1000 Watts CW

New

  • 80MHz–1000MHz
  • 1000 Watts CW
  • Equipped with a Digital Control Panel (DCP)
  • Self-contained, air-cooled, broadband, completely solid-state amplifier
  • Designed for applications where instantaneous bandwidth and high gain are required

More details

Request Quote/More Info

PDF Downloads

Test Equipment Description

The Amplifier Research 1000W1000F is a self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 1000W1000F, when used with an RF sweep generator, will provide a minimum of 1000 watts of RF power.

The Model 1000W1000F is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a color LCD touch screen and a single rotary knob to offer status reporting and control capability. The display provides operational presentation of Forward Power and Reflected Power plus amplifier status. Special features include a gain control, internal automatic level control (ALC) with front panel control of the ALC threshold, forward and reflective RF sample ports for precise power measurements and RF output level protection. Protection is provided by DC current level sensing of all output stages.

All amplifier control functions and status indications are available remotely in GPIB/IEEE488 format and RS-232 hardware and fiber optic, USB and Ethernet. The buss interface connector is located on the back panel and positive control of local or remote operation is assured by a keylock on the front panel of the amplifier.

Housed in a single equipment rack, the 1000W1000F provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, and as a driver for frequency multipliers and higher power amplifiers. A safety interlock can be implemented via a rear panel connector.

The export classification for this equipment is EAR99. These commodities, technology or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

1000W1000F RF TYPICAL POWER OUTPUT

Specifications
RATED OUTPUT POWERTypical, 1200 watts; 1000 watts minimum
INPUT FOR RATED OUTPUT1.0 milliwatt maximum
POWER OUTPUT @ 3 dB compressionNominal 1200 watts, 1100 watts min up to 700 MHz, 950 watts from 700 to 1000 MHz
POWER OUTPUT @ 1 dB compressionNominal 1000 watts, 950 watts min up to 700 MHz; 850 watts min from 700 to 1000 MHz
FLATNESS±1.5 dB maximum; ±1.0 dB typical FREQUENCY RESPONSE: 80–1000 MHz instantaneously
GAIN (at maximum setting)60 dB minimum
GAIN ADJUSTMENT (continuous range)25 dB minimum
INPUT IMPEDANCE50 ohms, VSWR 1.5:1 maximum; 1.3:1 typical
OUTPUT IMPEDANCE50 ohms nominal
MISMATCH TOLERANCE100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. (See Application Note #27)
MODULATION CAPABILITYFaithfully reproduces AM, FM, or Pulse modulation appearing on input signal.
HARMONIC DISTORTIONMinus 20 dBc maximum at 900 watts, -20 dBc typical @ 1000 watts
THIRD ORDER INTERCEPT POINT66 dBm typical
NOISE FIGURE8 dB maximum, 6 dB typical
PRIMARY POWER (specify voltage)200-240 VAC, 50/60 Hz, single phase, 5000 watts
CONNECTORS
RF InputSee Model Configurations
RF OutputSee Model Configurations
Forward sampleN female, front (-63 dBc)
Reverse sampleN female, front (-63 dBc)
Remote InterfacesIEEE-488 24-pin female
RS-232 9-pin Subminiature D, female
Fiber Optic ST Conn Tx and Rx RS-232
USB 2.0 Type B
Ethernet RJ-45
Safety Interlock15-pin Subminiature D, rear panel
COOLINGForced air (self contained fans), enters front and bottom
WEIGHT (approximate)124.8 kg (275 lb)
SIZE (W x H x D)56.1 x 127 x 83 cm (22.1 x 50 x 32.4 in)
EXPORT CLASSIFICATIONEAR99

Associated EMC Test Equipment

26 other products in the same category: