RF Data Line CDN's

Quick Links

Information

Viewed products

Teseq CDN S751A 75 Ohm...
Coupling networks designed for IEC/EN...
EM Test CNV 504...
As per IEC 61000-4-5 Ed.3, Fig 10/A4,...

Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing

View larger

Display all pictures

Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing

Condition New

Coupling networks designed for IEC/EN 61000-4-6
Testing for 75 Ohm Coaxial Cables
Includes calibration adapters
Turnkey test systems available
Rent the Teseq CDN S751AS

The EMC Shop

More details

Typically In Stock

$1,245.00 + Shipping

Request Quote/More Info

Send to a friend
Send to a friend
Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing
Coupling networks designed for IEC/EN 61000-4-6
Testing for 75 Ohm Coaxial Cables
Includes calibration adapters
Turnkey test systems available
Rent the Teseq CDN S751AS
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

Specifications

Voltage Rating	AC max. voltage (line to ground): 250V;DC max. voltage (line to ground): 400 V;Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)
Frequency Range	150 kHz to 230 MHz
RF Connector	BNC 75 Ω
Standards Met	IEC 61000-4-6
Mains & EUT Connections	BNC 75 Ω
Common Mode Impedance	150 kHz to 26 MHz: 150 Ω ±20 Ω;26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating	1000 mA maximum
RF Input Voltage	20 Volts Max
Decoupling of Common Mode Disturbance	150 kHz: Over 60 dB;1.5 MHz: Over 60 dB;30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)
Voltage Division Factor	10 dB ±1 dB to 80 MHz, 10 dB +3, -2 dB from 80 MHz to 230 MHz
Dimensions	4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)
Weight	1.5 kg (3.3 lbs)

Test Equipment Description

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

Each CDN is also useable for emission testing. Special types meet the requirements of CISPR 15 or can be used as impedance stabilization network (ISN) defined in CISPR 22.

Teseq CDN S751AS Includes:

Coupling Decoupling Network for IEC 61000-4-6, type S1, 150 kHz-230 MHz (BNC 75Ohm)
Calibration adapters (CAL U100B, SAR S500)
Storage Case
Calibration Certificate
Manual
10% off Service for Life of Unit